bopmen S40 Wireless Active Noise Cancelling Headphones User Manual

S40
Wireless Active Noise Cancelling Headphones
User Manual

What’s in the box

Safety Instructions

Hearing Safety:

1. To avoid hearing damage, please do not listen for a long time at a high volume.
2. Please cautiously use or stop using in potentially dangerous situations.
3. Do not use headphones while driving.
4. For your safety, please do not turn the volume too high while wiring outside, so that you can hear your surroundings.

Operation Safety.

1. Avoid dropping
2. Do not &assemble.
3. Keep away from children to avoid danger from improper use.
4. Do not submerge in water
5. Do not use the device outdoor Cuing that. Anderson S Avoid operating in extreme temperatures, please use the device within its operation temperature: -15°C (5°F)-55°C (1 31°F). 7. Use original or certified cables to charge. 8. Do not use any corrosive cleaner/oil to clean the headphones.

How to use?

| Hold Multi-function Button for 3 seconds to turn on the headphones, and then the device enters the paring mode. (Indication light turns blue)
---|---
| Hold Multi-function Button for 3 seconds to turn off the headphones.
| Press to adjust the volume. Long press to skip to the next/previous song.
| Press and hold the volume up and down buttons simultaneously for S second to clear the Bluetooth pairing record.
| Press Multi-function Button to play/pause music.
| Hold the ANC button for one second to turn on/off Active Noising canceling (Indication light turns green)
| Press Multi-function Button to answer/end call.
| Press Multi-function Button to reject the coming call
| Double press Multi-function Button to reject coming call / activate the Sin voice control function.

WARNING

The in-flight plug adaptor lets you enjoy the balanced sound from the in- flight entertainment system while traveling in a plane.

The In-flight adaptor is NOT MEANT to charge your device. Plugging the in- flight adaptor into a AC Power Socket to charge the headphones will cause severe damage to the device.

At a Glance

NOTE: bondsmen S40 only has one audio channel, if you want to play music from another Bluetooth device, please pause the current device’s music first

ANC-Active Noise Cancelling:
Turn on ANC: Push the ANC button to the Indicator light on green. Turn off ANC: Push ANC button to Indicator turns off.

AUX Wired Connection:
The headphones support AUX input for wired external audio source connection. Simply Power Off the headphones and plug in the audio cable. (Note: Wired mode is not available when the headphones ran out of battery)
NOTE: The buttons and microphone on open S40 will not work when connected as wired headphones.

Functions

Easy Pairing

1. Hold Power Button for 3 seconds to turn on the headphones, and then the device enters paling mode.
2. Keep the headphones and your Bluetooth device as close as possible during the pairing process.
3. Tum on the Bluetooth function of your Bluetooth device. Search the headphones’ Bluetooth signal on your Bluetooth device, and select “540” to pair it with your Bluetooth device. The Indicator Light slowly flashes blue when the headphones pair successfully.
4. If you are asked for the password/PIN code during the pairing procedure, enter “0000” (four zeros).

Pair to The Second Bluetooth Device

1. Make sure the headphones have been connected to the first Bluetooth device successfully. And the headphones are not playing music.
2. Turn off the first device’s Bluetooth.
3. Turn on the second device’s Bluetooth. find the “540” model name and select it to pair with your device.
4. Turn on the first device’s Bluetooth and select “540” pair it again.
   Restore factory setting
   Press and hold the volume up and down buttons simultaneously for 5 seconds to clear the Bluetooth pairing record.

Specification

Indicator Light

• Pairing Red and blue light flash alternately
• Paired: Blue light flashes
• Playing Slow flashes blue light
• Charging. Red light on
• Full Charge: Red light turns off
• Battery Low Red light flashes with voice prompt
• ANC Working: Greenlight turns on

Technical Specification

• Product Name: S40
• Bluetooth Version: V5.0
• Input 5V/220mA
• Noise Reduction Depth:20-25dB
• charging time: About 2.5 hours
• using time 1:15 hours (ANC+BT)
• Using Time 2:20 hours (BT only)
• Using Time 3:40 hours (ANC only)
• Bluetooth Profile: A2DP AVRCP HFP HSP
• Bluetooth Range: 10m/33ft
• Sensitivity. I 02+/-3dB
• Impedance: 32 Q
• Driver Diameter: 40mm
• Frequency Response: 20Hz-20kHz
• Net Weight 230g

Collapsible Design

Q&A

Q: Why do the headphones not work when using an audio cable?
A: If the battery of the headphones is completely dead, it cannot be used in the wired state. Please after charging the headphones for 0 minutes and then use the audio cable to enter wired mode.
Q: Why the headphones can’t pair with my mobile phone?
A: Please check whether your headphones are in pairing mode or reconnection mode, check if the Bluetooth search function of your Bluetooth device has been turned on. And then go to the Bluetooth menu of your Bluetooth device, delete/forget the headphones, and reconnect the headphones.
Q: Why headphones can’t be turned on?
A: Please double check battery status of your headphones.
Q: Can I replace the battery for the headphones?
A: No. these headphones use a built-in nondetachable Li-Polymer battery. It can’t be replaced.
Q: Can I use the headphones while driving?
A: For your safety, we strongly recommend you to not use headphones to avoid distraction while driving.
Q: Why do the headphones sometimes disconnect with Bluetooth devices within 10 meters?
A: Please check if there is any metal material within the relatively close range that may interfere with the Bluetooth connection. Because Bluetooth is a radio technology that is sensitive to objects between the headphones and its connected devices. and its connected devices.
Q: Why I cannot hear any voice from my computer or mobile phone?
A: Please check if the output channel of your computer supports the A2DP profile. And please check the volume of your headphones, as well as your computer/mobile phone.
Q: Why am I unable to use the headphones to control the volume of select track of APP on my mobile phone?
A: Due to the configuration of different application software, the headphones may not totally compatible with some applications.
Q: What can I do if the Bluetooth is crashed? (Cannot close or open)
A: Please reset headphone Bluetooth by inserting an audio cable into the audio jack then removing it.
Q: Why the Bluetooth is turned off when I use the audio cable to connect?
A: This is our special set. All Bluetooth feature buttons stop working and Bluetooth should be turned off when users insert the audio cable into the jack. Don’t worry, the Bluetooth will be available when the audio cable is moved.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  RF Exposure Information
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

GLOBAL:info@bopmen.com
http://www.bopmen.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>