FIAMMA 08753-02 Frame Sprinter Kit Instruction Manual
- June 13, 2024
- FIAMMA
Table of Contents
Kit Frame
Installation and usage instructions
08753-02 Frame Sprinter Kit
Please consult the website for instructions in the languages:
NL-SV-DA-NO-FI-PT
https://www.fiamma.it/index.php?route=product/istruzioni &code=uspkZNFv6Q
CARRY-BIKE KIT FRAME SPRINTER 08753-02-
MERCEDES SPRINTER ≥2018
CARRY-BIKE
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualifi ed personnel and in compliance with
current local regulations.
Installation only on right rear door
Not suitable for vehicles with 270° hinge system
Tighten the screws and ensuring that the rear door opens and closes correctly
Attention: keep the following labels and affi x them to the Carry-Bike rails.
CARRY-BIKE ®
Alphanumeric Code
Made in Italy ALWAYS SECURE THE BIKES
CARRY-BIKE ® FRAME DUCATO E-BIKE PRODUCT NAME
Fiamma declines all responsibility for any personal injury and damage to
property due to incorrect assembly or use of the product; it is suggested to
keep the instructions inside the vehicle. The assembly of the product must be
carried out according to the assembly instructions: the product must not be
modifi ed in any way.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle.
Fiamma declines every responsibility for any modifi cation of the product that
may cause damage and/or injury to things and people.
Read the following instructions and warnings carefully; failure to observe
these installation and usage instructions as well as the Highway Code in the
relevant country may cause severe harm or damage for which the manufacturer
declines all responsibility. Keep the original packaging to be used in case of
return.
Before installation, ensure compatibility with the vehicle on which the
product must be installed.
Checking that the wall/rear door is suffi ciently solid and suitable for
guaranteeing the resistance of the anchoring points is always mandatory. If
not, fi xing and compliance with the maximum load indicated in the instructions
are not guaranteed and it will be necessary to reinforce it.
Always comply with speed limits and the Highway Code. The speed should always
be suitable to traffi c conditions and transported load. Check periodically the
ladder to make sure it is fi rmly attached, especially during the fi rst
kilometers of after long trips.
alphanumeric code
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
M0_IS_98690M094_revA
https://www.fiamma.it/en/
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time,
without notice, prices, materials,
specifi cations and models or to cease
production of any model.
Documents / Resources
|
FIAMMA 08753-02 Frame Sprinter
Kit
[pdf] Instruction Manual
08753-02, 08753-02 Frame Sprinter Kit, Frame Sprinter Kit, Sprinter Kit, Kit
---|---
|
FIAMMA 08753-02 Frame Sprinter
Kit
[pdf] Instruction Manual
08753-02 Frame Sprinter Kit, 08753-02, Frame Sprinter Kit, Sprinter Kit, Kit