NOBLEX NS 20-60×80 ED Spotting Scope User Manual
- June 10, 2024
- NOBLEX
Table of Contents
NOBLEX NS 20-60×80 ED Spotting Scope
Product Information
The E-OPTICS is a premium spotting scope with over 150 years of experience in optics. It is manufactured using the latest optical technology and design to meet the highest demands in optical imaging performance. The spotting scope is solid in its workmanship and has broadband anti-reflection coatings on the ED optical elements that provide a high-contrast image with true colours and excellent transmission. The spotting scope is waterproof and suitable for eyeglass wearers. The product is delivered with a sliding, extendable lens hood that can be extended to prevent unwanted sunlight from reaching the objective lens and affecting image quality. The spotting scope is also delivered with an eyecup that can be adjusted for eyeglass wearers and normalsighted observers.
It is important to note that due to the high and intense focussing of light, direct observation of the sun with the telescope may cause eye injuries and must by all means be avoided.
Product Usage Instructions
Adaptation of the eyecup
If you are an eyeglass wearer, use the spotting scope with the eyecup
turned all the way down to utilize the full field of view. If you are a
normalsighted observer, turn the eyecup out as far as it will go.
Lens Hood
During normal use, the hood remains fully retracted. However, in situations where sun glare is a problem, extend the lens hood to prevent unwanted sunlight from reaching the objective lens and affecting image quality.
NOBLEX NS 20 – 60 x 80 ED
GENERAL INFORMATION
The spotting scope you have purchased is a premium product of fine mechanical precision. It is manufactured in accordance with the latest opti-cal technology and design to meet the highest demands in optical imaging performance, and is solid in its workmanship. Broadband anti-reflection coatings on the ED optical elements provide a high-contrast image with true colours and excellent transmission. The spotting scope is also suitable for eyeglass wearers and is waterproof.
SCOPE OF SUPPLY
Included in the delivery are:
- Cleaning cloth
- Warranty card
- Protective covering
- Objective and ocular protection caps
TECHNICAL DATA
- Model 20 – 60 x 80
- Magnification 20 – 60 x
- Ø Objective aperture [mm] 80
- Field of view [m at 100 m] 38 to 17
- Close focus [m] 6.5
- Ø Exit pupil [mm] 4.0 – 1.3
- Exit pupil longitudinal distance [mm]
- 19.5 Twilight performance 69.3 – 40.0
- Focal length [mm] 402
- Max. length [mm] 440
- Max. width [mm] 98
- Max. height [mm] 171
- Weight [g] 1420
- Sealing Waterproof 1 m / 30 min.
COMMISSIONING
Distance adjustment and eye defects compensation
To observe an object at varying distances with equal clarity and contrast,
it is necessary to adjust the spotting scope to the appropriate distance.
While observing the object, turn the two focusing knobs (1) to the right or
left until the image is perfectly clear with the best possible contrast. The
rear knob (1a) is the quick focus and the front knob (1b) is for a fine focus
adjustment. For best results, the quick focus should always be used to focus
slightly beyond the sharpest point. Afterwards, the fine focus adjustment knob
(1b) can be used to focus precisely on the finest details.
Adaptation of the eyecup
These models are specifically designed for eyeglass wearers. The normal-
sighted observer should turn the eyecup (2) out as far as it will go. Eyeglass
wearers should use the spotting scope with the eyecup turned all the way down,
to utilise the full field of view.
Magnification change
Depending on the object distance and lighting conditions, the appropriate
magnification can be easily set by turning the magnification ring (3) by up to
60°. For an easier orientation, the most important magnification values are
engraved on the tube. No matter which random magnification is then chosen, the
image quality and sharpness will remain the same.
Connection for a tripod
The spotting scope can be mounted on a standard tripod using the integrated
¼” tripod socket (4).
Lens hood
Your spotting scope has a sliding, extendable lens hood (5). With normal
use, the hood remains fully retracted, but in situations where sun glare is a
problem, it can be extended. This is useful for preventing unwanted sunlight
from reaching the objective lens and affecting image quality.
Clamping screw
If the need to change the viewing angle should arise, a clamping screw (6)
has been integrated into the mounting bracket of the spotting scope. Loosening
the clamping screw (by turning it counter-clockwise) enables the spotting
scope to be rotated along its longitudinal axis and in the desired direction.
Using the pre-defined standard or ± 45° lock-in positions can provide an
optimal and secure clamping.
MAINTENANCE AND CARE
The spotting scope requires no special care, it is virtually maintenance free.
Optic external surfaces must be cleaned with a fine brush or a soft cloth
if necessary. Coarse dirt particle should be rinsed off or blown off before
wiping. An excessive rubbing when brushing the optical parts can destroy the
anti-reflection coating. No chemical solvents should be used and the device
should be stored dry! In addition, it is always recommended to use the
eyepiece protective cap and the lens protective cap after use. Furthermore,
the ever-ready case included in the scope of delivery serves for safe storage
as well as for use, due to the easy disassembly possibility of the eyepiece
protection and objective lens protection.
Because of the continuous, further development of our products, deviations from the illustrations and the text of this prospect are possible. Its copy – even in extracts – is only permitted with our authorization. We reserve the right of translation. For publications we gladly provide available reproducstions of illustrations.
- NOBLEX E-Optics GmbH Seerasen 2
- D-98673 Eisfeld fen
- +49 (0) 3686 688 902-0
- info@noblex-germany.com
- www.noblex-germany.com
Stand / Release 2021 508.080.098.24