BrandCharger Nano Pro Thinnest Wireless Speaker with 10W Power User Manual
- June 6, 2024
- BrandCharger
Table of Contents
- BrandCharger Nano Pro Thinnest Wireless Speaker with 10W Power User
- 1. Buttons & Connections
- 2. Connect to music player
- 3. Hands-free
- 3. TWS True Wireless Stereo
- 5. Charging the NANO Pro
- 6. Specifications
- 5. Legal
- Federal Communications Commission (FCC) Statement Power
- Warning:
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BrandCharger Nano Pro Thinnest Wireless Speaker with 10W Power User
Manual
1. Buttons & Connections
Boutons & Connections
ON/OFF, answering phone, Bluetooth pairing, pause/play
- Female micn:rUSB power input
- Microphone
- LED indicator
2. Connect to music player
3. Hands-free
Moblkl phone must be connected to NANO Pro already (see prevkius page for
Instructions)
Accept call on mobile device.
Accept call on NANO Pro by pressing button e. Use NANO Pro for hands-free call
by talking into NANO Pro built in mic.
3. TWS True Wireless Stereo
YOY need 2 Nano Pro devices to use the TWS.
5. Charging the NANO Pro
To charge the NANO Pro, use the USB cable to conn~! :,:~~rutter or any device with a USB power output port. LED indicator tul’l1~rging.
6. Specifications
| Bluetooth | Bluetooth | Bluetooth | 5.1, A2DP, AVRCP, HFP, HSP |
|---|---|---|---|
| Frequency range | Frequenzbereich | Gamme de fréquences | 180Hz – 18KHz |
| Communication range | Kommunikationsreichweite | Portée de la communication | 10M |
| Speaker unit | Lautsprechereinheit | Haut-parleur | φ32mm x 2 + diagraph |
| Output power | Ausgabeleistung | Puissance de sortie | 5W x 2 |
| S/N Ratio | S/N Verhältnis | Signal/Bruit ratio | S/N≧90dB |
| Rated Inpedance | Nennwiderstand | Impédance nominale | 4Ω |
| Distortion | Verzerrung | Distorsion | THD≦5% |
| Rechargeable | Wiederaufladbare | Batterie rechargeable | 750mA Li-ion |
| Voltage Input | Eingangsspannung | Tension d’entrée | 5V-400mA |
| Playtime | Spielzeit | Durée d’autonomie | 4h |
| Power input | Eingangsleistung | Alimentation électrique | 5PIN MICRO-USB |
| Charge time | Ladezeit | Temps de charge | 2.5h |
| Dimensions | Abmessungen | Dimensions | 124 x 47 x 20 mm |
5. Legal
Manufacturer shall not in any way be liable to you or to any third party for
any damages you or any third party may suffer as a result of use, intended or
unintended, or misuse of this wireless speaker
in conjunction with any device or accessory other than the appropriate mobile
device for which this wireless speaker is designed.
Manufacturer will not be responsible for any damages you or any third party
may suffer as a result of misuse of this wireless speaker as outlined above.
If you are responsible for wireless speaker
use with an unintended mobile device and damages result from such use, you
agree to indemnify
Manufacturer for any resulting injuries to any third parties.
Federal Communications Commission (FCC) Statement Power
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: • Reorient or relocate the receiving antenna. •
Increase the separation between the equipment and receiver. • Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. • Consult the dealer or an experienced radio/TV
technician for help.
Warning:
Changes or modifications made to this device not expressly approved by Lab Made Limited may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.