JUNO WF2 RD ALO25 SWW5 Wafer 2 LED Downlight-WF2 Instruction Manual

INSTALLATION INSTRUCTIONS
Juno Wafer 2” LED Downlight-WF2 Series

WF2 RD ALO25 SWW5 90CRI 120 MW M6
WF2 RD ALO25 SWW5 90CRI MVOLT MW M6
WF2 DREG B ALO25 SWW5 90CRI 120 MW M6
WF2 DREG SM ALO25 SWW5 90CRI 120 MW M6
WF2 DREG B ALO25 SWW5 90CRI MVOLT MW M6
WF2 DREG SM ALO25 SWW5 90CRI MVOLT MW M6

Visit http://www.acuitybrands.com/brands/lighting/juno to find complementary fixtures and much more.

• Customer Support
• Energy Saving Tips
• Our Complete Product Catalog
• Product Specifications
• Product Instruction Sheets
• Glossary of Lighting Terms

READ AND FOLLOW ALL SAFETY INSTRUCTIONS!

SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
Product Information : Juno Wafer 2” Series may be used in retrofit or new construction applications.
Product Contents : Each unit carton contains the following: 1ea LED Juno Wafer 2” Series light module,1ea remote driver box. Additional mounting and trim accessories are sold separately.
Warning: Before moving forward with installation, ensure all Product Contents are included in packaging
Required Tools (not included): Safety glasses, screwdriver, ladder, saw, wood screws and gloves.
Product Warning: Failure to follow any of these instructions could void product warranties. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For a
complete listing of product Terms and Conditions, please visit www.acuitybrands.com. Acuity Brands Lighting, Inc. assumes no responsibility for claims arising out of improper or careless installation or handling of its products.

Product Listings: CSA certified to US and Canadian safety standards; Energy Star qualified; California Title 24 compliant; wet location listed. Juno type IC fixtures are designed for direct contact with insulating materials which are approved for this  application, fixture may also be used in non-insulating ceilings; NOM listed; Juno Air-Loc rated are comply with energy code and air leakage requirements per ASTM283.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
This device is not intended for use with emergency exits or emergency lighting.

LED IMPORTANT SAFETY INSTRUCTIONS

• To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions included with and on the fixture box and all fixture labels.
• Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
• Installation and service of luminaires should be performed by a qualified licensed electrician.
• Maintenance of the luminaires should be performed by person(s) familiar with the luminaires’ construction and operation and any hazards involved. Regular fixture maintenance programs are recommended.
• It will occasionally be necessary to clean the outside of the refractor/lens/trim. Frequency of cleaning will depend on ambient dirt level and minimum light output which is acceptable to user. Refractor/lens/trim should be washed in a solution of warm  water and any mild, non-abrasive household detergent, rinsed with clean water and wiped dry. Should optical assembly become dirty on the inside, wipe refractor/lens and clean in above manner, replacing damaged gaskets as necessary.
• DO NOT INSTALL DAMAGED PRODUCT! This luminaire has been properly packed so that no parts should have been damaged during transit. Inspect to confirm. Any part damaged or broken during or after assembly should be replaced.
• Recycle: For information on how to recycle LED electronic products, please visit www.epa.gov.
• These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with installation, operation, or maintenance. Should further information be desired, or should particular  problems arise which are not covered sufficiently for the purchaser’s or owner’s purposes, this matter should be referred to Acuity Brands Lighting, Inc.

• WARNING RISK OF ELECTRIC SHOCK

• Disconnect or turn off power before installation or servicing.
• Verify that supply voltage is correct by comparing it with the luminaire label information.
• Make all electrical and grounded connections in accordance with the National Electrical Code (NEC) and any applicable local code requirements.
• All wiring connections should be capped with UL approved recognized wire connectors.

• CAUTION RISK OF INJURY

• Wear gloves and safety glasses at all times when removing luminaire from carton, installing, servicing or performing maintenance.
• Avoid direct eye exposure to the light source while it is on.

• WARNING RISK OF BURN

• Allow lamp/fixture to cool before handling. Do not touch enclosure or light source.
• Do not exceed maximum wattage marked on luminaire label.
• Follow all manufacturer’s warnings, recommendations, and restrictions for: driver type, burning position, mounting locations/methods, replacement and recycling.

• CAUTION RISK OF FIRE

• Keep combustible and other materials that can burn, away from lamp/lens.
• Do not operate in close proximity to persons, combustible materials or substances affected by heat or drying.

• CAUTION RISK OF PRODUCT DAMAGE

• Never connect components under load.
• Do not mount or support these fixtures in a manner that can cut the outer jacket or damage wire insulation.
• Never connect an LED product to an unapproved dimmer pack. Contact ABL directly for any dimmers not specifically recommended for the product.
• Unless individual product specifications deem otherwise: Allow for some volume of airspace around fixture. Avoid covering LED fixtures with insulation, foam, or other material that will prevent convection or conduction cooling.
• Unless individual product specifications deem otherwise: Maximum ambient temperature is 90°C. Do not operate fixture at temperatures higher than this.
• Unless individual product specifications deem otherwise: Never mount in places where fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
• LED products are Polarity Sensitive. Ensure proper Polarity before installation.
• Electrostatic Discharge (ESD): ESD can damage LED fixtures. Personal grounding equipment must be worn during all installation or servicing of the unit.
• Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
• There are no user serviceable parts inside the unit. Do not rewire, reconfigure, or modify the unit or attempt any repairs yourself. Additionally, field replacement of the LED assembly or lamps is not allowed by UL standards at this time. In the unlikely event your unit may require service, stop using the unit immediately and contact an ABL representative.

• CAUTION RISK OF WIRING PRODUCT DAMAGE

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

All luminaires that contain electronic devices that generate frequencies above 9kHz from any component within the luminaire comply with one of the following Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Remodel (Install from below) INSTALLATION STEPS:

Read the entirety of the Installation Instructions guide before beginning to install the fixture.
WARNING: Before beginning the installation, make sure all power is off, shutting power off in breaker box to areas where downlights are to be installed is recommended

1. Remove existing retrofit fixture and recessed housing if present or move it out of the way since it will not be needed for installation. If a new hole is to be cut, use the provided hole template. Place template over the desired location. Trace the outer ring with a pen or pencil (not included). Cut the opening with a hole saw (hole saw is recommended to make the precise cut required for this installation) (see Figure1). Recommended hole diameter is 2.5”.
2. Double check and measure the ceiling hole. Make sure it is the correct size for the outside rim of the luminaire to cover the hole while still allowing the back of luminaire to sink into the ceiling and springs to hold firmly.
3. Open the cover of the remote driver box. Push and remove the appropriate knockout(s) on the side plate to accommodate the type of electrical supply being used. Locate power supply leads from remote driver box and connect to power source using poke-in connectors (provided). Connect black wire to live wire, white wire to neutral wire, and copper ground wire with ground (as shown Figure 2) and secure using poke-in connector; Pink and Purple Wire only applies to MVOLT fixture 0-10V dimming. Close the cover of the box.
4. Connect the remote driver box to the trim module and tighten the nut connector by hand. Arrow on the male and female parts of the connector between the driver and fixture cable should match. (Figure 3)
5. Use switch on the driver box (Lumen/CCT options need to be selected before fixture installation) to select appropriate lumen output (High-Medium-Low option, with High as factory default) and light color (27K-30K-35K-40K-50K option, with 30K as factory default). (Figure 4)
6. Place remote driver box through the cut-out hole (Figure 5). MUST follow local electric code for rigid attachment and placement of the remote driver box. For optional mounting kits, the instruction sheets for new construction plate and joist bar kit can be found at www.acuitybrands.com
7. Pull the spring clip on the trim module up and through the ceiling hole and place module in the hole making sure the spring clips are holding securely. (Figure 6)
8. Turn the power back on. If the module doesn’t illuminate within 5 seconds, turn power off, carefully remove the module and double check all wiring and replace. (Figure 7) WARNING: DO NOT PLACE YOUR HAND UNDERNEATH SPRING CLIP DURING REMOVAL PROCESS.
   SNAPPING OF THE CLIPS CAN CAUSE INJURIES TO THE HAND (Figure 8).
   WARNING: DO NOT CONNECT MULTIPLE MODULES TO ONE DRIVER
   WARNING: DO NOT OPEN THE MODULE INSIDE OF THE REMOTE DRIVER BOX – NO SERVICEABLE PARTS INSIDE.

TROUBLE SHOOTING GUIDE

If this fixture fails to operate properly, use the guide below to diagnose and correct the problem.

• Verify that fixture is wired properly.
• Verify that fixture is grounded correctly.
• Verify that the line voltage at the fixture is correct.

If further assistance is required, contact: Technical Support at: (800) 705-SERV (7378).
This LED module does not require service or new bulbs to change.
The LED modules are compatible with several standard residential dimmers. A list of recommended dimmers can be found at www.acuitybrands.com,keyword search WF2. Exclusion from this list does not mean a dimmer will not work in conjunction with the
led module. Consult the dimmer manufacturer regarding compatibility with LED Modules.

One Lithonia Way · Conyers, GA 30012 · Phone 1-(800)705-7378
Visit us at www.acuitybrands.com/juno-recessed
© 2024 Acuity Brands Lighting, Inc.
912-00497-001 REV A
DATE 01/2024

References

• Acuity Brands | Lighting, Controls, and Building Management Solutions
• U.S. Environmental Protection Agency | US EPA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>