MULTIBRACKETS Arm 980mm SD Dual M Universal Long Reach Instruction Manual
- June 9, 2024
- MULTIBRACKETS
Table of Contents
MULTIBRACKETS Arm 980mm SD Dual M Universal Long Reach
IMPORTANT!
Your Plasma. LCD, TV, Projector, Projector Screen or other HiFi equipment
represents a considerable value. If screws are included they may not be
suitable for the material of your wall, ceiling or floor. Replace the screws
with suitable ones if needed. In case you are unsure regarding any aspects of
the mounting of this product please Consult a professional.
Warning
Always check the depth of the holes before starting an installation.
WARRANTY CARD
MULTIBRACKETS TM Limited Warranty
Multibrackets warrants its products to be free of defects in material and
workmanship for the product’s Warranty Period. The Warranty Period commences
on the original purchasedate of the product. All Multibrackets products are
covered by a limited product warranty
- FIVE (5) years for metal video monitor mounts; all racks and non-electrical rack accessories
- TWO (2) years for gasiífts and sit-stand workstations
- ONE (1) year for all motorized and/or automated products, plastic speaker mounts; all speaker stands; all furniture; all wood (MDF) accessories
For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part on your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you and once we confirm the product is under war rantY, we will ship replacement parts to you. This Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. so, if your problem requires a repair technician, you must pay any labor charges. This Limited warranty extends only to the original purchaser of the product and is automatically void if your Multi brackets product is modified in any waY, improperly installed, taxed beyond its stated weight capacity or otherwise misused or abused. All Multibrackets products are intended for indoor use only and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and war ranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use its products, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicable law, Multibrackets disclaims any responsibility for incidental or consequential damages. Multibrackets ‘” Stockholm Sweden 2016,
The content of this manual is subject to change without further notice. The latest version of this manual can be found online under the product name on the website: www.multibrackets.com
WARNING
Severe personal injury and property damage can result from improper
installation or assembly. Read the following warning carefully before
beginning.
- Products must be installed by professionals.
- If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
- Do not install or assemble if the product or hardware is damaged or missing, if you require replacement parts, please contact you local distributor for assistance.
- This product fits most 65″-110″ LCD/ plasma screen; maximum weight of LCD /plasma screen: 125kg
- This product has been designed for use on masonry (solid concrete, 2000 PsI density minimum).
- For safe installation, the wall you are mounting to must support minimum 3 times the weight of the total load (the mount, the TV and all accessories).
- Do not use this product for any other application than originally designed.
- This product contains moving parts, please use with caution.
- When installing flat panel display. please do not damage electrical wiring or power source.
- The manufacturer will bear no responsibility for mounting to the vertical wall, or incidental or consequential damages arising thereof.
- The manufacturer disclaims any liability for the modifications, improper installation, or installation over the specified weight range.
- The manutacturer will not be liable for any damages arising out of the use of, inability to use, the product.
Past list
INSTALLATION OPTION Wood Stud Installation (Suitable for 16″ or 24″ apart studs)
- Use a stud finder to locate the dry wall studs and mark the desired installation locations with a pencil.
- Attach the Wall Plate Template (BB) to the wall at the desired installation location.
- Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations on the middle of the studs.
- Use a 7/32″ (5.5mm) drill bit to drill a pilot hole on the wall with a depth of at least 2.6″ (65mm). Please note, failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H). NOTE: Do not use Wall Anchor (I) for wood stud installation.
INSTALLATION OPTION 2: Concrete/Brick Wall Installation
- Attach the Wall Plate Template (BB) to the wall at the desired installation location.
- Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level and mark 6 lag bolt installation locations on the stencil and the wall.
- Use a 3/8″ (10 mm) drill bit to drill a pilot hole on the wall with a depth of at least 2.6″ (65mm). Please note, failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Insert 6 x Wall Anchors (I) into holes. Secure the Wall Plate to the wall with 6 x Lag Bolts (H) and 6 x Washers (H).
- This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place. Place the top locking bar at the desired position to fix the left slide limit of the arms and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limit the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate. WARNING: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.
- Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns) For TVs with smaller bolt hole patterns of VESA 100×100 , 100×200 , 200×100 and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.
- Remove the screws
- Take off the rails
- Attach VESA Plate to TV
- Attach VESA Plate to Arms Slide in the VESA plate on to the notch on the arms, attach the two safety screws behind the VESA plate to lock in the VESA plate to the arms,as shown below.
- Attaching the TV to the Mount (For Displays With Larger Bolt Hole Patterns) For TVs with larger bolt hole patterns of VESA 300×300,400×200,400×400,600×400, 800×600 mm, use the TV brackets and the extension bars to install the TV to the mount.
Attach the 2 x TV Brackets to the back of the TV by using screws A+E or B+E or C+E or Dor G.
NOTE: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits. Ensure the screws are adequately engaged with the screw holes on the TV. Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the TV
Hanging TV On The Wall Mount Arms
Lift the TV up (two persons recommended) and hang the TV brackets on to the wall mount extension bars.
Securing The TV On The Mount
Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown on the image.
NOTE: Failure to secure the TV brackets to the mount with AA Safety Brackets may result in accidental lift off of the TV from the extension bars, possibly resulting in bodily or property damage.
Leveling adjustment -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To
adjust the level of the TV, place a bubble level on top of the TV, loosen the
2 x G bolts located behind the VESA plate, level the TV and tighten the 2 x G
bolts to lock the TV in position.
Tilt adjustment -5° – +10°
The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the
tilt angle of the TV, pull out the tilt adjustment levers on both sides of the
mount and turn counterclockwise to loosen the screws. Adjust the tilt to the
desired angle and turn the tilt adjustment lever clockwise to tighten the
screws. NOTE: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT
ADJUSTMENT LEV ER TIGHTNESS AND TIGHTEN IF NECESSARY.
- Use the integrated cable management clips on the arms to route cables to the back or side of the TV.
Dimensions
