HIKVISION DS-PDPC12P-EG2-WA Wireless Pir-Camera Detector User Guide
- June 6, 2024
- Hikvision
Table of Contents
DS-PDPC12P-EG2-WA
Wireless PIR-Camera Detector
Quick Start Guide
EN50131-1:2006+A1:2009+A2:2017
EN50131-2-2:2017
EN50131-5-3:2017
Security Grade(SG) 2
Environmental Class(EC) II
Certified by Telefication
Appearance
- Fill Light
- Camera
- LED Indicator
- Bracket Tamper
- Tamper Button
- Power Switch Interface
Enrollment Installation
I. Check signal strength.
II. Install the device.
a. Mount the detector with a screw.
b.Mount the detector with sponge tape.
Note: Installing with sponge tape is non EN compliant.
III.(Optional)Install the device with a bracket.
Note: Installing with ceiling bracket is non EN compliant.
Test
User Manual
Scan the QR code for more information and operation help.
Specification
Detection range | 12m, 85.9° |
---|---|
Auto Sensitivity | Yes |
Pet immunity | Up to 30Kg (Height<40cm) |
Camera coverage | 88°(H), 68°(V) |
Auto day and night | Colour, Black & White |
Image size | 160 x 120, 320 x 240, 640 x 480 |
Tamper protection | Front & Back |
LED indicator | Alarm (blue), signal strength (red, green, amber) |
Operating temperature | -10 °C to 55 °C (14 °F to 131 °F) |
-10 °C to 40 °C (14 °F to 104 °F) Certified
Storage temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity| 10% to 90%
Installation height| 1.8 to 2.4m (nominal mounting height = 2.1m)
Dimension (W x H x D)| 72.2mm x 120.5mm x 56.7mm
Weight| 210g
Transmission frequency| 915MHz
RF range| 0.8Km (open area)
Battery| CR123A x 3 (included), 3V/1600mAh
Standard battery life| 6 years
Low voltage value| 2.45 V
Voltage Range| Fully charged (new) to 2.45 VDC (battery)
Current| Max. current: 1.5A Quiescent current: 20uA
Note: when the low voltage message appears there will be at least 30 days of use.
User Manual
http://enpinfodata.hikvision.com/analysisQR/showQR/a90c89d0
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images, and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change, without notice, due to firmware updates or their reasons. Please find
the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/). Please use this Manual with the guidance and
assistance of professionals trained in supporting the Product. and other
Hikvision trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned are the properties of
their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE
THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES
NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION, AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-
USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,
THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
CE
This product and – if applicable – the supplied accessories too are
marked with “CE” and comply therefore with the applicable harmonized European
standards listed under the RE Directive 2014/53/EU, the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information
see:www.recyclethis.info
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
BATTERY CAUTION
replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types);
– disposal of a battery into fire or a hot oven, or mechanically crushing or
cuttng of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas; and
– a battery subjected to the extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas
Chemical burning danger
Do not swallow the battery.
Keep new and used batteries away from the children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Risk of explosion if the battery is replaced by an incorrect type.
Replacement of a battery with an incorrect type can defeat a safeguard.
Dispose of used batteries according to the instructions and local regulatton.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
INSTALLATION CAUTION
The additional force shall be equal to three times the weight of the equipment
but not less than 50N.
The equipment and its associated mounting means shall remain secure during the
installation.
Affer the installation, the equipment, including any associated mounting
plate, shall not be damaged.
Hangzhou Hikvision Digital Technology CO., Ltd.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>