MOREJOY MJ111 Jouirbuds M True Wirless Headphones User Guide
- June 6, 2024
- MOREJOY
Table of Contents
MJ111 quick guide
Initial Pairing
- Open Case Lid to activate pairing mode.
- To change pairing devices, press and hold the button for 3 seconds and wait for green
**Bluetooth Menu
**
Turn on the Bluetooth of the device you wish to pair to, select “Jouirbuds M”
and follow the on-screen instructions. 
**Answer call / Play music
**
(When wearing both earbuds) Double-tap the touch Area at the earbud to answer
the call, double-tap again to end the call Double-tap the touch Area at the
earbud to pause the
music, double-tap again to play.
**Next/ Previous Track
**
(When Listening to the music) Press and hold 3 secs on the left earbud for the
previous track. Press and hold on to the right earbud for the next
track.
Keep the current call & answer the second call at the same time| Double-tap on
any earbud
---|---
Hang up the current call & automatically answer the second call| Double-tap on
any earbud
Clear pairing information| Long press the charging case button for 10 seconds
**Charging the earbuds
**
Put the earbuds into the charging case and close the lid, the charging case
will automatically charge the earbuds.
**Charging the case
**
Please use a USB-C charger to charge the case. The status LED will light up
red while charging and change to green when charging is
complete.
| Function | Operational Instructions |
|---|---|
| Power On | Take earbuds out of the charging case |
| Power Off | Put earbuds into the charging case and close the lid for the 30s |
| Earbuds Chargin | Put earbuds into the charging case and close the lid |
| Pairing Mode | Press the button on the charging case for 3 seconds |
| Answer a call | Double-tap the touch Area at the right or left earbud |
| Play Music | Double-tap the touch Area right or left earbud |
| Next / Previous track | Press and hold 3 secs on the left earbud for the |
previous track. Press and hold on to the right earbud for the next track.
**Limited Warranty
**
MORE JOY products are warranted against defects in materials and craftsmanship for a period of one year By default from the date of the original purchase. in accordance with MOREJOY’s user manuals. Under this warranty, your claim can be made through the place of original purchase. During the warranty product, MORE JOY will, at its sole option, repair or replace the original, defective parts or issue a refund in the amount of the original purchase price. This warranty does not include damage resulting from accidents, or from improper use, maintenance, or repair, or causes that are not defects in materials or craftsmanship. If you would like to verify the warranty term of the product bought, please kindly contact info@morejoyinno.com The information provided in this document is for information only. MORE JOY seeks to provide accurate and timely information, nevertheless, there may be inadvertent technical or factual inaccuracies and typographical errors, for which we apologize. We reserve the right to make changes and corrections at any time, without notice.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. the party
responsible for compliance could void the user’s authority to operate the
equipment. his equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the correct interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.