AGMBUDS True Wireless Stereo Earbuds User Guide

: June 6, 2024
: AGM

AGMBUDS True Wireless Stereo Earbuds

SPECIFCATIONS

Name: true wireless bluetooth earphones Model: AGM BUDS Driver: 13mm Frequency response:20Hz~20KHz Impedance:32ohm Sensitivity:109±3db Bluetooth version/range:V5.0/10m Music/Talk time:about 5 hours/about 4 hours Time with a charging case:16~20 hours

CONNECT THE DEVICE

Please keep the distance between the Bluetooth headset and the mobile phone (or other connected device)within 1 meter, the closer the better;
Open the cover of the charging case,the indicator light of the charging case is on, L/R is automatically paired,and waiting to connect to the Bluetooth device;
Turn on the users’mobile phone Bluetooth function(or other Bluetooth device),search or scan,at this time the mobile phone will search for nearby Bluetooth devices,click on the searched headset name:AGM BUDS,after success connected,you can make a phone call and listen to the music at this time;
If the headset is not connected for 3~5 minutes,the headset will automatically sleep and shut down.

POWER ON AND PAIRING

Boot up

When the charging compartment is opened,the headset automatically turn L/R is automatically paired.

Shut down

Put the earhhone into the charging case and close the lid,waiting for 2~3 secnonds to automatically shut down.

Android system

Press the ear bar continuously for 2~3 seconds to enter the voice assistant,(L/R touch area).

IOS system

Settings>Wireless and Network>Bluetooth> Settings>(change the left and right noise to SIRI)
Press the ear bar continuously for 2~3 seconds to call SIRI.

CALLING CONTROL

Calling answer

Press the ear bar once(L/R)on the touch area to answer the phone.

Calling hang up

Press the ear bar once(L/R)on the touch area to hang up the phone.

Incoming calling rejection

Press the ear bar twice(L/R)on the touch area to area to reject the phone.

PLAYING MUSIC

Play/Pause

Ear bar press 1 time(L/R) touch area.

Previous song

Press the ear bar bar 3 times in a row(L/R) touch area.

Next song

Press the ear bar bar 2 times in a row(L/R) touch area.

CHARGE THE EARPONE

After the L/R earpone is put into the Charging case,the earpone will be charged in the charging compartment,and the light will flash for 3~4 seconds and the light will be off.

CHARGING CASR CHARGING

Charging case rated input: 5V=1A
Charging time:About 2 hours
Charge interface: Type-c

Battery capacity
30mAh(earphones) 250mAh(charging case)

PRODUCT SAFETY INFORMATION

Do not use corrosive cleanser to clean this product.
Do not heat the product or nearby the fire,like cooking stove.
Do not expose the product to sunlight directly for a long time.
To avoid explosion,do not throw the product into fire.
Do not try to disassemble this product for any modification, because it does not contain any repair components.
Do not use this product in the rain.
If you plan not to use this product for a long time,please keep it in dry environment and make sure to charge it at least once a month to avoid extre temperatures and dust.
The ambient temperature of product is 0-40.

Basic information of manufacturer
Company: SHENZHEN AIJIEMO SCIENCE AND TECHNOLOGY CO.,LTD
Copyright © AGM Group Limited
2021. All rights reserved.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.

Documents / Resources

| AGM AGMBUDS True Wireless Stereo Earbuds [pdf] User Guide
AGMBUDS, 2A3DR-AGMBUDS, 2A3DRAGMBUDS, AGMBUDS True Wireless Stereo Earbuds, True Wireless Stereo Earbuds, Stereo Earbuds, Earbuds
---|---