Shenzhen Kingree Intelligent Digital BT2930 Bluetooth Speaker User Manual

Shenzhen Kingree Intelligent Digital BT2930 Bluetooth Speaker User Manual

Product Parameters

Model: BT2930
Transmission Distance: 10M
Frequency Response: 100Hz-20KHz
Impedance:4 OHM(Ω)
Charging Time: Approx 3 hours
Material: ABS+Silicone
BT Version: 5.0
Output Power: 3W
Speaker Unit Size:45 mm
Battery capacity: 1200mAh
Playing Time: Approx 5 hours
Dimensions: 75.575.590MM

Button Introduction

1. Power ON/OFF MODE
2. Short press to select the previous track Long press to decrease the volume
3. Play/Pause
4. Short press to select the next track Long press to increase the volume
5. AUX / INPUT
6. Charging port

How to use

Button Introduction

1. Press and hold the power button to turn on the speaker,a prompt tone will be heard, it will automatically enter the pairing mode and the LED light flashes quickly.
2. Turn on your device’s Bluetooth and select the name “BT2930″ which will appear on your device and pair it with the speaker.
3. Activate the music player app on your mobile phone and choose your favorite songs to play

AUX Input

1. Press and hold the power button to turn on the speaker, insert one end of aux cable into the 3.5mm aux jack of the speaker and the other end to the audio device.

Button Function

1. Power/Mode Button: Press and hold for 3 seconds to turn on or off the speaker. Short press the button to switch the mode. Double click it to enter the stereo pairing mode(TWS)
2. Play/Pause button: Press once to pause the music and press again to play the music. When you receive an incoming call, press once to answer the call and press again to reject the call. At FM mode, long press to auto seach the FM radio frequency.
3. “-” button: Short press to select the previous track/Long press to decrease the volume
4. “+” button: Short press to select the next track/Long press to increase the volume

Charging

To charge the speaker, connect the Micro USB charger cable (included) to an adapter or a computer. The red LED lights up when charging and it will turn off when fully charged.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>