Shenzhen Kingree Intelligent Digital BT2602 IPX7 Waterproof Portable BT Speaker Instruction Manual
- June 5, 2024
- Shenzhen Kingree Intelligent Digital
Table of Contents
Shenzhen Kingree Intelligent Digital BT2602 IPX7 Waterproof Portable BT
Speaker
Product Specifications
- Model No: BT2602
- Connection Distance: 10m
- Frequency Response: 100Hz-20KHz
- Impedance: 40
- Charging Time: Approx 4hours
- Material: ABS+Silicone
- Bluetooth Version: 5.0
- Output Power: 3W
- Speaker Driver: 50mm
- Battery Capacity: 800mAh
- Playing Time: Approx 5 hours
- Size: 75.575.561.5mm
Button Function llustration
- Power On/Off: Long Press
- Play/Pause: Short Press
- Previous Track/ Volume Down Short press to go to the previous track and long press to decrease the volume
- Make a phone call: Short press to answer or reject the call
- Next track/Volume Up: Short press to go the next track and long press to increase the volume
Bluetooth mode operation
- Long press the power on/off button to turn on the speaker. Now it will automatically enter the Bluetooth pairing mode and the blue light flashes quickly.
- Make sure your phone (or another compatible device) has the Bluetooth function on. Select “BT2602” from your mobile phone’s list of available Bluetooth devices. When connected to a device, the speaker’s light will be solid blue.
- Once paired to a device, the speaker will automatically connect to it when turned on, provided that the device is within its range and has its Bluetooth function on.
Charging
Use the charging cable provided to connect to the speaker toa compatible wall
charger,
computer, etc. During charging, the LED indicator will be solid red. When the
speaker is fully charged, the LED will turn off.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.