COOSPO BC26 Bike Computer Wireless GPS User Manual

**COOSPO BC26 Bike Computer Wireless GPS User Manual

**

Button function

Up Left
Short Press: Switch Data Type / Numerical Value

Left Down
Short Press: Switch Data Type / Numerical Value
Long Press: Enter / Exit Setting Mode

Right Button
Short Press: Power on / Start Riding / Switch Settings
Long Press: Power off / End the ride

Status Icons

 Time
 No satellite signal
Satellite signal level
Alert sound on / off
 Riding
Manual pause /Auto pause
Bluetooth connected
Battery level
 Average speed
Maximum speed
MPH   Miles per hour
KMH Kilometers per hour
TIME Riding time
DST Distance
ALT Altitude
ODO Odometer (Total distance)
TOT Total riding time
UTC Time zone
h Hour
Ft / Km / m / mi Unit

Standard accessories

• Main Device x 1
  

• Charging Cable x 1
  

• User Manual x 1
  

• Standard bike mount x 1
  

• Rubber pad for standard bike mount x 1

• Big size rubber ring x 2 Small size rubber ring x 2
  

How to Install

Standard Mount Installation

1. Install the rubber pad onto the mount
   

2. . Tie the mount onto the bar with the rubber rings
   

3. Tie up the mount
   

4. Install the main device onto the mount
   

5. Rotate the main device for 90 degrees
   

6. Installation completed
   

Charging

1. Please charge the device before first time use.
2. Please use DC 5V power adaptor for charging.
3. During the charging, the battery icon will flash until fully charged.

 The product has a built-in battery. Do not throw the product into a fire. Please
choose an adapter that meets the rated voltage of the device to charge the device to avoid damage to the device.

Acquiring Satellite Signals, Time Setting and Auto Backlight

Acquiring Satellite Signals
BC26 uses GPS for speed tracking, and please make sure the device is outdoor and under a clear view of sky when using it. Usually it may take 15~90 seconds
for the bike computer to locate satellite signals, remain stationary when acquiring satellite signals.

Time Setting
The time and date will be calibrated automatically after locate the satellite signals(Check how to set the time zone correctly, please refer to the time zone
setting chapter).

Auto Backlight
This device will automatically calculate the sunrise and sunset time, from the time half an hour before sun set to half an hour after sun rise, the backlight will
be automatically lighted; the backlight will be turned off if no operation detected in 15 seconds.

Time Zone Setting

1. Long press  to enter the setting mode (P1~P3), P1 time zone setting, the currently set numerical value flicker display;

2. Short press  to switch numerical value;

3. Short press to confirm the current setting, and enter the next digit or the
   next setting (P2 metric / imperial setting);

4. The device will automatically save and exit after 15s no operation or long press to exit the setting.

Setting Metric and Imperial Units

1. Long press  to enter setting mode (P1~P3), short press  to enter P2 metric / imperial setting；
2. Short press  to switch between metric (KMH) / imperial (MPH);
3. Short press    to confirm the current setting and enter the next setting (P3 speed alert setting).

Maximum Speed Alert Setting

1. Long press to enter the setting mode (P1~P3), short press to enter the P3 maximum speed alert setting, the currently set numerical value flicker display;
2. Short press to switch numerical value;
3. Short press to confirm the current setting and enter the next digit setting or the next setting;
4. Short press to set the prompt tone on / off, after the setting is completed, Long press to exit or no operation for 15s to automatically save and exit.

GPS Positioning

1. Auto GPS positioning after the bike computer is power on. Please start  cycling after the GPS positioning is successful.
2. Please make sure you are outdoor when positioning. Bad weather and dense forest may affect GPS signal. You can stand still 3-5 minutes to get more connections with satellites for better GPS signal.
3. If you lost GPS Positioning during riding, the speed data (real-time, average, maximum) will be displayed as” “, and the rest of the data remains the same.

Cycling

Turn on the device, short press to start riding, short press to pause / start; Long press to end riding (when the speed is 0 or there is no data during riding, or when the speed is too low, the bike computer will automatic pause / automatic start ; When there is no speed data during riding, the cycling computer will automatically enter dormant after 15 minutes, and it will return to the previous riding state after pressing to turn it on).

Riding Data Display

1. Short press    cycle to switch real-time speed, maximum speed, and average speed.
2. Short press  cycle to switch time, distance, altitude and time & distance display mode automatically switch data.
   Real-time Speed Maximum Speed Average Speed
   

Bluetooth Connection

1. Download CoospoRide in Google Play or App Store
   
   
   
   Compatible with
    iOS 9.0 version and above, iphone 4s and above
    Any Bluetooth 4.0 enabled Android device with Android 4.3 and above

2. Power on the bike computer;

3. Open the CoospoRide App, enter the binding cycling computer step, select the BC26 bike computer in the device list to bind the device, (the phone needs to turn on Bluetooth and allow Bluetooth permissions);
   

4. In the activity page of the App, click on the connected device to enter the record synchronization operation page (through the authorization to Strava in the App more settings, the computer data can be synchronized to the Strava platform at the same time);

5. Select the record to be synchronized and click Sync, and the record on the bike computer will be deleted automatically after synchronization.
   

Basic Parameters

Attentions

The water resistant level of the bicycle computer is IPX7. It can be used in the rain if you close the protective cover on the back tightly. It is recommended to take down the bicycle computer and put it into waterproof bag if it rains heavily.

Responsibility Disclaimer

• The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
• We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>