VEIKK A30 Battery-Free Pen Tablet User Guide

VEIKK A30 Battery-Free Pen Tablet User Guide

Product Overview

Tips: During the normal working state, when the pressure pen is suspended in the active area of the A30 tablet, the indicator light flashes; when the pen touches the tablet, the indicator light is always on.

Pen

Note: The pen is battery-free, no need to charge or battery

Packing List

Installing Driver

OS Support

• Windows 10/8/7 Mac OS 10.12 or later
• Android 6.0 or later

Installation

For a PC

1. Before installing driver, please uninstall all tablet drivers from your computer nad keep all antivirus program and drawing software closed
2. connect tablet to your computer before installation
3. please downloaded updated driver from www.veikk.com
4. click setup.exe and follow on screen instructions
5. after installation then restart your computer

For an Android mobile phone:
No need to install VEIKK driver on your phone

Tablet Connection

For a PC/laptop:

1. Connect the tablet to your computer with USB cable
2. Open the driver interface, if the upper left corner shows the product model, indicating  that the tablet has been  connected successfully  you can start using your tablet now
   

For an Android mobile phone:

1. Please connect the tablet to your mobile phone with the OTG
2. Choose the most comfortable way you like to use the
   • The working area of the tablet is 10*6 inch, but you need to rotate the tablet as shown in Figure
   • Press K1 and K4 at the same time, the working area of the tablet is 3*6 inch, but you can use the tablet in the normal direction as shown in Figure

Note1: Works in mobile phone vertical screen mode only.
Note2: For some mobile phones, you need to enable the OTG function manually in the phone’s Settings.
Note3: The short keys on the tablet and pen can’t work on Android mobile phone.

Replacing the Nibs

when the pen nib is heavily worn please replace the nib with nib removal

1. insert the pin nib into then pen holder hole
2. tilt the pen so that the pen holder con fully catch the pen nib
3. pull out the nib
4. insert a new nib in the pen and push it straightly until it stops

Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>