BUNGiE Destiny 2 Witch Queen Psychometer Decoder Instruction Manual
- June 6, 2024
- BUNGiE
Table of Contents
Destiny 2 Witch Queen Psychometer Decoder
Made in China
Input: 1A/5V. Output: 300mA/4.25V.
Voltage: 3.7V. Current: 300mA.
Power: 3.7Wh
Made in Dongguan KongXing Industry Company LTD. The Fifth Industrial Zone, Xiegang Town, Dongguan, Guangdong, China
Distributed by Bungie Aerospace Corporation, 550 106th Ave NE, Bellevue WA 98004 / Brand Access LLC, Joop Geesinkweg 501, 1114AB Amsterdam-Duivendrecht, Niederlande.
+1 877 302 2237. customerservice@bungiestore.com. FCC ID：2A2JI-50125861
Please note that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate equipment.
CAUTION: Risk of electric shock. This product is not a toy and is not intended for use by children. For adult use only. Do not plug in extension cords, indoor use only. For safe use, plug only into exposed wall outlets where the console is ventilated and cannot contact materials that may present a fire hazard.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Hive Ghost Stand: Made in Dongguan KongXing Industry Company LTD. The Fifth Industrial Zone, Xiegang Town, Dongguan, Guangdong, China
Hive Ghost:
Distributed by Bungie Aerospace Corporation, 550 106th Ave NE, Bellevue WA 98004 / Brand Access LLC, Joop Geesinkweg 501, 1114AB Amsterdam- Duivendrecht, Niederlande.
+1 877 302 2237.
Made in China
PSYCHOMETER
The Psychometer is a specialty device hacked together by Hidden operatives in order to hear “memories” associated with objects. This device reads invisible energies associated with objects. The Hidden believe these energies are connected to the Darkness. When properly tuned and paired with a resonant object, the Psychometer can detect and play back sounds and voices linked to the object’s past. The device isn’t perfect. It offers only shaky access to these energies, so sometimes the sounds are difficult to hear or incomplete.
INSTRUCTION MANUAL
Power up the Psycho meter by charging it using the supplied USB cord and connecting it to a power source. Once the battery is fully charged, the charge indicator will turn from red to green on the back of the device.
Insert the UF antenna and turn the power dial to on by rotating it to the right. You are able to adjust the volume of the device using this knob as well.
After the Psychometer has cycled through its internal tests, the indicator lights will be off except for the single “ready” light closest to the power dial. The device is now ready for use.
Place any artifact on top of the frequency coils and use the three adjustment knobs on the left to home in on any memories to extract from the artifact. Most artifacts can be placed directly onto the coils; however, the Hive Ghost requires the insertion of the clear support arm to provide stability and places it within the optimum sensory range of the Psycho meter. Please insert the support arm into the center of the Psycho meter, and then place the Hive Ghost onto the top of the arm – a black ring has been added to the support arm to aid in insertion into the Hive Ghost.
As you adjust the frequency modulators for each artifact, the indicator lights on the right will start to light up, the closer you get to unlocking a memory. When all four indicator lights are lit, you have dialed in the correct frequency, and any message will be played.
To power down the Psycho meter, rotate the volume knob on the right to the far left and remove the antenna for storage.
Alimentation : 1 A/5 V.
Puissance de sortie : 300 mA/4,25 V.
Voltage : 3,7 V.
Courant : 300 mA.
Énergie : 3,7 Wh
Fabriqué à Dongguan KongXing Industry Company, Ltd The Fifth Industrial Zone, Xiegang Town, Dongguan, Guangdong, Chine
Distribué par Bungie Aerospace Corporation, 550 106th Ave NE, Bellevue, WA, 98004, USA / Brand Access LLC, Joop Geesinkweg 501, 1114AB Amsterdam- Duivendrecht, Pays-bas.
+1 877 302 2237. customerservice@bungiestore.com. ID FCC# 2A2JI-50125861