anko 43072910 Cat Tower XL Instructions
- June 6, 2024
- Anko
Table of Contents
Cat Tower XL
Contents
Instructions
Step 1.
Screw the bottom board (No.1 x1) to the cat house (No.2 x1) using the hex key
and screw (B x 1). Screw the two poles (No.9 x 1 & No.10 x 1) into the bottom
board using the hex key and screws (A x 2). Insert the screws (C x 2) into the
top of the poles (No.9 x 1 & No.10 x 1). Step 2.
Screw poles (No.12 x 2) into the cat house (No.2 x 1) using the hex key and
screws (A x 2). Insert the screws (C x 2) into poles (No.12 x 2).
Step 3.
Place the middle board (No.3 x 1) on. Screw the four poles (No.9 x 1 & No.10 x
1 & No.11 x 1 & No.12 x 1) on screw C, then insert the screws (C x 3) into
poles (No.9 x 1 & No.10 x 1& No.12 x 1). Refer to the image below.
Step 4.
Screw round board (No.4 x 1) on screw C. Put the middle pet bed (No.8 x 1) on
pole (No.12 x 1), screw pole (No.12 x 1) on screw C, insert the screw (C x 1)
into pole (No.12 x 1) .
Step 5.
Put the top board (No.6 x 1) on. Screw three poles (No.11 x 1 & No.13 x 1 &
No.14 x 1) on screw C as shown below.
Step 6.
Put the top board (No.6 x 1) on. Screw top square pet bed (No.7 x 2) on poles
(No.13 x 1 & No.14 x 1), screw round board (No.4 x 1) on pole (No.11 x 1).
Using the Hex key and screw (B x 1) to screw-top board (No.6 x 1) together
with the round cat house (No.5 x 1).
WARNING: Pet toy – Not intended for children.
It is the responsibility of the pet owner if this toy is suitable for their
pet’s style of play.
No pet toy is indestructible and can be damaged during play.
For your pet’s safety, inspect regularly and remove if damaged.
Always supervise your pet during play.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>