BOSCH E-NR 9001671887 Series Warming Drawer Stainless Steel Instruction Manual
- June 17, 2024
- Bosch
Table of Contents
BOSCH E-NR 9001671887 Series Warming Drawer Stainless Steel
Product Information
Specifications
- Model Number: 9001671887
- Installation Manual: 031123
Product Usage Instructions
Installation
- Refer to the installation video QR code for detailed installation instructions.
- Ensure safe installation by following the guidelines provided in Figure 15 and Figure 16.
- Use a screwdriver to lift the hose protector, as shown in Figure 17.
- If required, use a telescopic tube for installation (Figure 11).
- Attach the included long adhesive tape for leakage prevention (Figure 26).
- Secure the adapter by holding it from the middle holder and pressing it firmly (Figure 13).
- Install the grease filter as shown in Figure 48.
- Perform a functionality check as described in Section “Performance Check” (Page 14).
- Seal the joints properly.
Safety Distances
Take into consideration the following safety distances:
- Distances to the overflow reservoir (Figure 11).
- Location of the overflow reservoir (Figure 12).
- An optimal power output is achieved when the distance from the back wall of the cabinet to the wall is 50mm. A smaller distance may reduce the power output (Figure 13).
- Keep a safe distance when opening the appliance door. Do not place any objects higher than the drawer, as they may hit the lower part of the appliance and disrupt its functioning (Figure 14).
General Notes
- Safe installation is essential for the proper functioning of the product. Follow the installation instructions carefully to guarantee safe usage.
- Warning: Magnetism! The appliance contains a permanent magnet that can interfere with the operation of electronic implants such as pacemakers or insulin pumps. Individuals with electronic implants must maintain a minimum distance of 10cm from the appliance.
- If using the extraction mode and simultaneously operating a fireplace that requires room air, ensure sufficient air supply at all times.
- There is no danger as long as the negative pressure in the room with the fireplace does not exceed 4 Pa (0.04 mbar). This is possible if additional combustion air can enter through open vents such as doors, windows, air supply, and exhaust systems. A single air supply and exhaust system cannot guarantee compliance with the limit value.
FAQ
Q: How can I access the installation video?
A: You can access the installation video by scanning the QR code provided
in Figure 2.
Q: Where can I find the dimensions of the product?
A: The dimensions of the product can be found in Figure 3.
Q: Are there different installation options?
A: Yes, there are different installation options. Please refer to the
overview provided in Figure 8, Figure 9, and Figure 10 for different setup
variations.
Q: Can I purchase additional parts for installation?
A: Yes, you can purchase additional parts for installation from our
customer service department, our website, or specialized stores.