CARSON 500907633 Warning Light Bar Instruction Manual
- June 5, 2024
- Carson
Table of Contents
CARSON 500907633 Warning Light Bar
Dear Customer
We congratulate you for buying this CARSON product, which is designed and
manufactured using state of the art technology.
According to our policy of continued development and product improvement we
reserve the right to make changes in specifi-cations regarding equipment,
material and design at any time without notice. Dear Customer We congratulate
you for buying this CARSON product, which is designed and manufactured using
state of the art technology.
According to our policy of continued development and product improvement we
reserve the right to make changes in specifi-cations regarding equipment,
material and design at any time without notice.
Limited Warranty
This product is warranted by CARSON against manufacturing defects in materials
and workmanship under normal use for 24 months from the date of purchase from
authorised franchisees and dealers. In the event of a product defect during
the warranty period, return the product along with your receipt as proof of
purchase to any CARSON store.
CARSON will, at its option, unless otherwise provided by law:
- Correct the defect by repairing the product without charging for parts and labour;
- Replace the product with one of the same or similar design.
All replacement parts and products, and products on which a refund is made,
become the property of CARSON. New or recon-ditioned parts and products may be
used in the performance of warranty services. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period. You
will be charged for repair or replacement of the product made after the
expiration of the warranty period. Specifications or designs of the actual
product may vary from those shown in this manual or on the box.The manual
forms part of this product. Should you ignore the operating and safety
instructions, the warranty will be void.
Keep this guide for future reference.
The Warranty does not cover
- Damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current;
- Damage caused by losing control of your model;
- Any repairs other than those provided by a CARSON authorised service facility;
- Consumables such as fuses or batteries;
- Cosmetic damage;
- Transportation, shipping or insurance costs; or
- Costs of product removal, installation, set-up service adjust-ment or reinstallation;
- Any changes to plugs and cables, open the housing and damage the sticker.
This warranty gives you specific legal rights, and you may also have other
rights which may vary according to the country of purchase.
The explanation of the symbol on the product, packaging or instructions:
Electronic devices are valuable products and should not be disposed of with
the household waste when they reach the end of their service life! Help us to
protect the environment and respect our resources by delivering this appliance
to the relevant recycling point.
We wish you a lots of fun using your CARSON product!
Before use, read this manual carefully!
This product is not a toy. Its control must be learned step by step. Children under 14 years of age should operate the product only under adult supervision.
MOUNTING THE WARNING LIGHT BAR
LIGHT MODULE
The light module has 4 outputs (max. 500 mA per output), and there are 10 different configuration options to choose from. With a 3-way toggle switch or 2/3-way switch (on-off-on), two settings can be programmed and toggled via the remote control.
CONNECTING THE MODULE
The module features a 3-wire servo connection cable and has the following
connections: Orange – Impulse/signal, Red – positive. Brown – negative.
Connect the module directly to a free channel on the receiver.
WARNING!
Connecting the cable with reverse polarity will result in damage or a
defect!
FUNCTIONS OF THE CONTROL BOARD
The board is activated by switching on the RC receiver power supply (BEC) and detects the zero position of the switch each time the system is switched on. The LEDs on the output will switch on at half brightness. The button/switch should be in the “off” position during this time, otherwise malfunctions may occur. The module is ready for use as soon as the LEDs have switched off. The programs can be enabled/disabled with one press of the button/switch By default, the module is configured as follows:
- Program1: Strobe light effect A
- Program2: Strobe light effect B
PROGRAMMING THE MODULE
The assignment of the settings A…J can be freely selected for both programs.
Assignment of settings (A– J) … to program 1:
-
Step 1: Enable program 1 by pushing the switch upwards.
-
Step 2: Push the switch/button upwards again and hold it in place for at least 7 seconds.
If some of the LEDs flash, this indicates that the next setting was selected. -
Step 3: Repeat step 2 until the desired setting is reached.
-
Step 4: Once you have selected the desired setting, push/hold the switch down for at least 10 seconds to save the “Program – setting” assignment. The LEDs will flash to indicate that the settings were successfully saved.
Assignment of settings (A– J) … to program 2:
-
Step 1: Enable program 2 by pushing the switch downwards.
-
Step 2: Push the switch/button upwards and hold it in place for at least 7 seconds.
If some of the LEDs flash, this indicates that the next setting was selected. -
Step 3: Repeat step 2 until the desired setting is reached.
-
Step 4: Once you have selected the desired setting, push/hold the switch down for at least 10 seconds to save the “Program – setting” assignment. The LEDs will flash to indicate that the settings were successfully saved.
Overview of settings options
Program A-B: Strobe light effect Program C-J: Flashing effects
The exact signal sequence for each setting is shown in the follo-wing table:
- 500907631 1:14 Position indicator set
- FH16 500907631 1:14 Position light unit FH16
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>