Shenzhen Lanxin Technology TWS-L21 True Wireless Stereo Earbuds Instructions
- June 6, 2024
- Shenzhen Lanxin Technology
Table of Contents
TWS(true wireless stereo)earphones
V5.0+EDR
TWS-L21 Manual
| Bluetooth version | V5.0 + EDR |
|---|---|
| Bluetooth protocol | A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 |
| Bluetooth Frequency | 2.4GHZ |
| Battery capacity | The headset is 50 mah. 300 mah rechargeable storehouse |
| Bluetooth Range | 10-15metesrs with no obstacles |
| Talk/playtime | Single earbud mode: 4 hours One pair earbuds mode: 3 hours |
Key Functions
| Power on | Long press the function button for 3 seconds |
|---|---|
| Play/Play pause | Press the function button |
| Previous piece | Double-click the vice machine |
| Next track | Double-click on the host |
| Add voice | Three strikes the host |
| Sound reduction | Three pairs of machine |
| SIRI | Long press the function button for 2 seconds |
| Switch Chinese and English | In the pairing state, double-click the function |
button to switch the prompt tone in Chinese and Englis
Instructions
| Pick up the charging bin and start it up automatically. After starting up,
the main and secondary engines will pair up
---|---
Bluetooth pairing| automatically. After successful pairing, the host machine
will flash red and blue alternately. This time the phone searches for
Bluetooth name connection.
| After the earphone alarm low power alarm sound, it is put into
Charging| the charging bin for charging. After charging, it is automatically
turned off. When charging, the red light is long and the lamp is off when it
is fully charged.
Answer calls| When calling, press the function button to answer the call and
then press the button again to hang up the call.
- Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
- Far-high WIFI router and other high-frequency transmitting equipment will affect the signal reception of the unit, resulting in sound card breaking and disconnection.
- Please use this product in the working environment (10m), and there should be no physical barriers (such as walls, etc.) between the Bluetooth device and the headset.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>