HIKVISION DS-PK1-E-WA Wireless LED Keypad User Manual

June 6, 2024
Hikvision

HIKVISION logo DS-PK1-E-WA Wireless LED Keypad
User Manual

EN 50131-1:2006+A1:2009+A2:2017
EN 50131-3:2009
EN 50131-5-3:2017
Security Grade(SG) 2
Environmental Class(EC) II
Certified by Telefication

Diagram Reference

Appearance

  1. Indicator
    HIKVISION DS PK1 E WA Wireless LED Keypad - Appearance

  2. Numeric and Function Key

HIKVISION DS PK1 E WA Wireless LED Keypad - Appearance
2

3. Serial Port 5. TAMPER Button
4. Battery 6. Power Switch
  1. Enrollment
  2. Installation

Check signal strength.

User Manual

Scan the QR code for more information and operation help.

Specification

Wireless Keypad

RF| Speed| 42Kbps
Frequency| 915.0MHz
Method| 2GFSK
Distance| 1200m (open area)
Transmission power| 13 dBm
Interface| Tamper switch| 1, front and rear panel tamper-proof
Wireless module| For wireless communication
Power switch| Power on/off
Buzzer| 1
Display| Indicator| 4:fault (orange), enrollment/signal (red/green), arming(red/green/blue), and alarm (red)
Backlight| white
Key| Number key| 10: 0 to 9
Function key| 5:*, tt, stay arming, away arming, disarming, and output
Operation Environment| Humidity| 10% to 90%
Temperature| -10 °C to 55 °C (14 °F to 131 °F)
-10 °C to 40 °C (14 °F to 104 °F) EN Certified
Appearance| Color| White/Black
Dimension(W x H x D)| 140mm x 86mm x22 mm
Installation| Installation| Screw mounting
Power Supply| Power supply| 1.5 VDC, four batteries (included, Capacity: 2300 mAh each ), standby time more than two years
Current| Max. current: 95 mA Quiescent current: 200 pA
Low voltage value| 1.1 V
Voltage Range| Fully charged (new) to 1.1 V (battery)
Weight| Weight without batteries| 151 g, and 23g each battery
Others| PS type| Type C
Classification| Use inside the supervised premises

User Manual

http://enpinfodata.hikvision.com/analysisQR/showQR/09a0ff5f

1.

HIKVISION DS PK1 E WA Wireless LED Keypad - 2

2.

HIKVISION DS PK1 E WA Wireless LED Keypad - 3

3.

HIKVISION DS PK1 E WA Wireless LED Keypad - 4©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual,
The Manual includes instructions for using and managing the Product. Pictures, charts, images, and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
HIKVISION logoand other Hikvision trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, DATA PROTECTION, AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see www.recyclethis.info
2006/66/EC (battery direcve): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentaon for specific baery informaon. The battery is marked with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated collection point. For more information see:www.recyclethis.info

BATTERY CAUTION

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);

  • ­ disposal of a battery into fire or a hot oven, or mechanically crushing or cung of a bakery, that can result in an explosion; ­
  • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas, and
  • ­ a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas

Chemical burning danger
Do not swallow the bakery.
Keep new and used batteries away from the children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Risk of explosion if the battery is replaced by an incorrect type.
Replacement of a battery with an incorrect type can defeat a safeguard.
Dispose of used batteries according to the instructions and local regulations.
If the battery compartment does not close securely, stop using the product and keep it away from children.
Install the binaries according to the polarity mark on the battery holder. The opposite polarity may cause device damage.

INSTALLATION CAUTION

The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. Aer the installation, the equipment, including any associated mounting plate, shall not be damaged. Install the device in a place with a non-flammable surface, such as a concrete wall.
FCC Information
Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Hangzhou Hikvision Digital Technology CO., Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Documents / Resources

| HIKVISION DS-PK1-E-WA Wireless LED Keypad [pdf] User Manual
K020103113, 2ADTD-K020103113, 2ADTDK020103113, DS-PK1-E-WA Wireless LED Keypad, Wireless LED Keypad, LED Keypad, Keypad
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hikvision User Manuals

Related Manuals