HIKVISION DS-PDMC-EG2-WA Wireless Magnet Detector User Guide
- June 6, 2024
- Hikvision
Table of Contents
DS-PDMC-EG2-WA
Wireless Magnet Detector
Quick Start Guide
APPEARANCE
| 1. Magnetic Stick | 2. Positioning line | 3. Indicator | 7. Battery |
|---|---|---|---|
| 4. Tamper Button | 5. Power Switch | 6. External Inputs |
ENROLLMENT
TEST
Check if the installation position is properly.
Magnet Detection Performance Table
Axes of Operation| Event| On non-ferromagnetic material surface| On the
ferromagnetic material surface
---|---|---|---
X+| Break| 11| 10
Make| 10| 8
X-| Break| 11| 10
Make| 10| 9
Y| Break| 28| 15
Make| 24| 12
Z+| Break| 31| 22
Make| 27| 20
Z-| Break| 45| 15
Make| 42| 13
INSTALLATION
- Check signal strength and align the positioning line.
- Install the detector.
a. with screw b. with sponge tape (non EN compliant)
∗(optional)route the cable through the cable hole if external inputs are required.
User Manual
Scan the QR code for more information and operation help.
Specification
| Detection gap | According to the magnet detection performance table |
|---|---|
| External inputs | 2 |
| Tamper protection | Front & Back |
| LED indicator | Blue (alarm) |
| Operating temperature | -10 °C to 55 °C (14 °F to 131 °F) |
-10 °C to 40 °C (14 °F to 104 °F) Certified
Storage temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity| 10% to 90%
Dimension (W x H x D)| Sensor: 22.5mm x 103mm x 23.2mm Magnetic Stick: 13mm x
34.4mm x 11.4mm
Weight| 59g
Transmission frequency| 915MHz
RF range| 1.6Km (open area)
Battery| CR123A x 1 (included)
Standard battery life| 5 years
Low Voltage Level| 2.45 V
User Manual
http://enpinfodata.hikvision.com/analysisQR/showQR/91b93679
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images, and all other information hereinafter are for description and
explanation only.
The information contained in the Manual is subject to change, without notice,
due to firmware updates or other reasons. Please find the latest version of
this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
and other Hikvision trademarks and logos are the properties of Hikvision in
various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, DATA
PROTECTION, AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the RE Directive 2014/53/EU, the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information
see:www.recyclethis.info
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
BATTERY CAUTION
replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types);
– disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas; and
– a battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Chemical burning danger
Do not swallow the battery.
Keep new and used batteries away from the children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Risk of explosion if the battery is replaced by an incorrect type.
Replacement of a battery with an incorrect type can defeat a safeguard.
Dispose of used batteries according to the instructions and local regulations.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
INSTALLATION CAUTION
The additional force shall be equal to three times the weight of the equipment
but not less than 50N.
The equipment and its associated mounting means shall remain secure during the
installation.
After the installation, the equipment, including any associated mounting
plate, shall not be damaged.
EN 50131-1:2006+A2:2017
EN 50131-2-6:2008
EN 50131-5-3:2017
Security Grade(SG)2
Environmental Class(EC) II
Certified by Telefication
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>