ZECHIN Samba Wireless Charging for Apple Watch User Manual
- June 6, 2024
- ZECHIN
Table of Contents
ZECHIN Samba Wireless Charging for Apple Watch
Product overview
Use the AC adapter to power the device.
Slide the component down to place the phone horizontally.
LED Indicator
| Solid white | Charging mobile device |
|---|
Flashing white
| Metal or abnormal temperature detected
Using an ultra-thick protective phone case or a case with a magnetic/ iron
plate is not recommended as it may aect the wireless charging function.
Do not put anything else between your smartphone and the wireless charger,
such as credit cards, door keys, coins, metal, NFC cards, etc.
Important Safety Instructions
-
Avoid dropping.
-
Do not disassemble.
-
Do not expose to liquids.
-
For the safest and fastest charge, use original or certified cables.
-
This product is suitable for moderate climates only.
-
The maximum ambient temperature during use of this product
must not exceed40°C. -
Open flame sources, such as candles, must not be placed on this
product. -
Only use a dry cloth or brush to clean this product.
Technical Parameters
| Input | 15V ⎓ 2.4A |
|---|---|
| Wirless Charger Output | iPhone 7.5W AirPods 5W |
Apple Watch 2.5W
USB-C Output| 5V⎓3A
9V⎓2.22A
12V⎓1.67A
USB-A Output| 5V⎓3A
9V⎓2A
12V⎓1.5A
USB-A + USB-C Output| 5V⎓3.4A
Accessory parameters
parameters
Adapter Molde
| KA3601A-1502400US
---|---
Input| 100-240 V~ 50/60 HZ
1.0AMax
Output| 15V ⎓ 2.4A
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
FCC ID：2AXAXSAMBA
service@hkzechin.com
www.zechintech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>