ZeCHIN Samba Pad 2-in-1 Wireless Charger User Manual

ZeCHIN Samba Pad 2-in-1 Wireless Charger User Manual

Product Overview

What’s in the Box：

Samba Pad Magnetic 2-in-1 Wireless Charger 1
Power Adapter 1
User manual *1

Technical Parameters

0.5AMax

Output| 9V ⎓ 2.22A

1. Insert the power adapter plug into the DC jack.

2. Use the AC adapter to power the wireless charger.

Magnetic charging pad

Designed for:

AirPods 3, AirPods Pro, AirPods (with wireless charging case) Samsung Galaxy Buds, Buds+, Buds Pro, Buds Live Soundcore Liberty Air 2, Air 2 Pro, 2 Pro All TWS earphones with wireless charging-
Case compatibility: Non-metallic Case thinner than 4mm for your device.

Non-Magnetic charging pad

Designed for: All iPhones with wireless charging. (iPhone 8 series and later) Samsung Note10+, 10, 9 Samsung 520+, S20, 520 Ultra, S10+, S10, S10e Pixel 4, Pixel 4XL • LG V30, V30+, G7, V35, V40 • Almost all mobile phones with wireless charging.
Case compatibility: Non-metallic Case thinner than 4mm for your phone.

Designed for: AirPods 3, AirPods Pro, AirPods (with wireless charging case) Samsung Galaxy Buds, Buds+, Buds Pro, Buds Live Soundcore Liberty Air 2, Air 2 Pro, 2 Pro All TWS earphones with wireless charging.
Case compatibility: Non-metallic Case thinner than 4mm for your device.

LED Indicator

1. Plug in the power adapter, the indicator light will light up faintly and keep on.

2. When any charging pad is working, the indicator light will be bright, and it will turn into a weak light after 5 seconds.

3. When there is metal on the charging pad, or the phone strays too far, the light will ash until the fault is corrected

Charging Mode Settings

1. Pry from the groove on the side of the charging Pad to lift it up

2. Pull the charging pad up, you can use the Hover mode

Hover Mode.

In this mode, you can adjust the angle of the iPhone at will, and even rotate it at will.
Tips：It is highly recommended to charge your device in this mode.
Charging is faster in hover mode as it is more conducive to cooling.
And easier to place and remove your device.

Important Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• Only use the original power adapter.
• This product is suitable for moderate climates only.
•  The maximum ambient temperature during use of this product must not exceed 40°C.
• Open flame sources, such as candles, must not be placed on this product.
• Only use a dry cloth or brush to clean this product.
• Do not put anything else between your smartphone and the wireless charger such as credit cards, door keys, coins, metal, NFC cards, etc.
• Make sure to place the device in the center of the charging pad. Improper placement may result in heat generation or non-charging.

Tips :

The charging speed is related to the ambient temperature.
For fast charging, please place the wireless charger in a cool and ventilated place. For example, a cool room, or near a fan or air conditioner.
Do not expose it to direct sunlight; or place it near hot objects. Such as electrical appliances, heating, fireplaces, etc.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC ID: 2AXAXW323 Product name: Samba Pad Magnetic 2-in-1
Wirless Charger Model : W323 Brand: Zechin Manufacturer: Longconn Electronics(ShenzhenKo.,Ltd. Made in China

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>