AUDIO BOX ABX-12S Portable Speaker Installation Guide

ABX-12S
INSTRUCTION MANUAL

Carefully read the following instructions to properly use this item and get the most out of it. If you are having trouble, please call us using the phone number located on the back cover of this manual.

OVERVIEW

1. Main Channel Controls
The main channel is able to play music from Bluetooth, FM Radio, Auxilliary, USB or TF card.

• MODE: Switches between the input modes mentioned above.
• WAV: Use the instructions on the following page to learn how you can pair two speakers wirelessly with Wayne”.
• PLAY: Press this button to play or pause music playing from Bluetooth, USB, or TF. When in FM mode hold this button to scan for stations.
• PREV/NEXT: Use these buttons to switch through songs playing on Bluetooth, USB, or TF card or channels in FM Radio mode.
• USB/TF: Insert a USB or TF card into the proper port and the speaker will automatically find any MP3 tracks and play them.

2. Auxiliary/Line Input
Play music from an auxiliary device with a 3.5MM cable when the main channel is in AUX mode. 3. Microphone Input and Controls (Channel 2)

• MIC IN: Use a 1 /4″ Cable to connect a microphone or other audio source. Use the “M. Vol” dial to control the volume of the microphone.
• ECHO: Controls the Echo.
• MIC.VOL: Controls the overall volume 4. Charge Port Plug the included adaptor into this port to charge the unit.

4. Charge Port
Plug the included adaptor into this port to charge the unit.
5. Power Switches

• LED SWITCH: Use this switch to turn the lights on the unit on or off
• POWER: Use this switch to power the unit on or off. Make sure to keep the unit off when charging and not in use.

Bluetooth Connection

1. Press the mode button on the main channel control panel until you are in Bluetooth mode.
2. Turn on the Bluetooth setting on your phone and search for “ABX-125”.
3. Once connected, the LCD display will confirm the connection and you can begin to play music from your Bluetooth device. If a PIN code is required, enter#0000″.

The wireless range for Bluetooth on this speaker is 33ft (-10m). Any distance further than this may cause stability issues with the music cutting in and out.

WAVESYNC TM

To connect two speakers using WaveSync, first make sure you have two matching speakers with the same model number. Then do the following:

1. Turn on both speakers and put them in Bluetooth mode.
2. On the speaker that you want to be the primary, press and hold the WaveSync button for three seconds. Both speakers will then make a noise confirming the connection.
3. Use the instructions at the top of the page to connect your Bluetooth device to the primary speaker.
4. Any music played through Bluetooth will play on both speakers. This function does not transfer music coming from AUX, USB, FM Radio, or any microphone/guitar inputs.

NOTE: WaveSync may not work with older or newer versions of the same model speaker. WaveSync is also not likely to work with another WaveSync enabled model even from the same brand. Consult your dealer before making any purchasing decisions.

USB/TF MP3 Function

You can play your MP3 files using a USB or card by following the below instructions:

1. Place your MP3 song files in the root folder of a USB or card.
2. Insert the card into the proper port and the speaker will automatically begin to play the songs.
3. You can skip through the songs with the minus and plus buttons.

FM RADIO

With the FM Radio function, you can listen to nearby radio stations using the following instructions:

1. Press the mode button once and you will be in radio mode.
2. Hold the play button once and the speaker will scan for nearby radio stations.
3. Once it is done, you can use the forward and back buttons to switch between the stations.

AUX Mode

Use the following instructions to play music on this speaker from an auxiliary device.

1. Find a 3.5mm AUX cable.
2. Connect one end of the cable to the AUX port of the speaker and the other end to your audio device.
3. Press the Mode button to enter AUX Mode.
4. Adjust the volume on both your audio device and the speaker itself.

BATTERY AND CHARGING INSTRUCTIONS

• To charge the battery, use the power cable to connect the speaker to a wall outlet.
• Make sure to fully charge the battery before using it for the first time to increase the life of the battery in the long term.
• The unit takes approximately 6 hours to fully charge. It will automatically begin charging once the power cable is connected.
• To maximize battery lifespan, make sure to charge the battery at least once every 3 months.
• Use the power switch to turn off the unit when it is not in use.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

HAPPY
If you are happy with your item, consider connecting with us on social media or leaving a positive rating online.

Something Wrong?
If you are unhappy with your item then we are not accomplishing our goal. Please contact us through our toll-free number to see how we can make things right.

1.888.550.3938
1.951.800.0078 (International)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>