E-jeton R15 R Series User Manual
- June 6, 2024
- E-jeton
Table of Contents
E-jeton R15 R Series
Shenzhen Yijietong Technology Co., Ltd
Tel: (86-755) 29881199
Fax: (86-755) 23156611
Add: (Yijietong Technology Industrial Park) Building 7, HangCheng Road,
NanChang Second Industrial Zone, GuShu Community, XiXiang Street, Bao’An
District, Shenzhen, CHINA
Safety Precautions
- Please place the machine on a flat vibration-free surface.
- Please make sure to avoid direct sunlight, water and other elements from entering the machine.
- Please keep away from any strong electronic interference.
- Do not cover the machine.
- In areas with unstable power supply, please connect an external UPS or power source to ensure electronic stability.
- The product comes standard with a power connector with earth leakage. Please do not change the connector unless certain of the power requirements.
- Make sure that the ground wire of the wall socket is connected. If the ground is not connected it may cause electronic shock and even cause a fire.
- The machine should not share the same power socket with any high-powered electronic appliances. Please ensure that all the machine has a dedicated wall socket for operation.
- The machine will be connected to various other peripherals. Ensure that the cable and connectors are well insulated and that all screws are tightened well.
- To clean the machine, use a damp cloth and refrain from using corrosive chemicals that might damage the machine.
- Should operation fail on the machine, remove the machine from live power. Refrain from opening or repairing the machine. Contact an authorized repair center or person to assist with repairs.
“WARNING”: For the non-compliance with the above issues, as well as non- qualified service personnel or the use of non-designated by the Company to provide and repair parts for maintenance of all the consequences, the Company does not assume any responsibility.
Initial Installation
Unpacking
Immediately after receiving the machine, unpack and check for any damage. In
case of damage, the shipping company shall be informed immediately report the
claim to the manufacturer. After unpacking also check the that the spare parts
are complete.
Preparing for Installation
Examine the case for cleanliness, Logos, marks and insure labeling is correct.
Check the working environment: Because the POS is a precision instrument, the
working environment should be checked and make sure it is suitable for the
cash register. If the work environment is not sufficient, please do not make
use of the POS.
The main technical specifications
Power supply voltage: 220VAC～ ± 15%
Power: 80W ± 15% Frequency:
50—60Hz
Operating Temperature: 0 ℃ ~ 40 ℃
Storage: -20 ℃ ~ +55 ℃
Relative humidity 20% ~ 93% (40 ℃)
Preparing for use
- Place the machine on a flat surface and ensure that the cabling is neat and sufficient. Insert the power connector in the appropriate socket.
- Power on the machine (note: stable power source and ground is important).
- Android OS is installed by default on the POS unit.
Main technical specifications
Main board configuration
Processer (CPU)| RK3288 Quad-core A17 1.8GHz
System Memory (RAM)| 2G
Storage Device (Flash)| 8G
Display
Size| 13.3’’/15.6’’
Resolution:| 1920*1080
I/O port
USB port| 6pcs
LAN port| 1pcs
COM| 1pcs RJ45(R13)/1pcs DB9+1pcs RJ45 (R15)
RJ11| 1pcs
DC IN| 1x DC 12V
TF Card| 1pcs
Audio| 1pcs
Operate Environment
Working temperature| 0-50℃
Humidity| 20-90%
Operating system| Android 5.1
Product Measurement
R13 Single Screen
R15 Single Screen
R15-13 Dual Screen
Product Appearance
Single Screen (Dual Screen)
Front
Back 
Dual Screen (R15-13)
Front
Back
13.3inch LED display parameter
| Item | Specification | Unit |
|---|---|---|
| Screen Diagonal | 13.3 | Inch |
| Active Area | 293.76(H)×165.24V) | mm |
| Pixel Pitch | 0.153(H)×0.153(V) | mm |
| Resolution | 1920×1080 | – |
| Pixel Arrangement | R.G.B. Vertical stripe | – |
| Display Mode | Normally Black | – |
| White Luminance | 220(Typ) | cd/m2 |
| Contrast Ratio | 1000:1(Typ)700:1(Min) | – |
| Viewing angle range | 89(Typ) | Deg. |
| Response Time | 25 | ms |
| Operating Voltage | 3.3V | V |
| Surface Treatment | Anti-glare (3H) | – |
| Outline Dimension | 305.2(W)×187.9(V)×2.6(D)Typ. | mm |
| Input signal | EDP | – |
| Support Colors | 16,777,216 | – |
15.6 inch LED display parameter
| Item | Specification | Unit |
|---|---|---|
| Screen Diagonal | 15.6 | Inch |
| Active Area | 344.16(H)×193.59(V) | mm |
| Pixel Pitch | 0.17925(H)×0.17925(V) | mm |
| Resolution | 1920×1080 | – |
| Pixel Arrangement | R.G.B. Vertical stripe | – |
| Display Mode | Normally White | – |
| White Luminance | 220(Typ) | cd/m2 |
| Contrast Ratio | 500:1(Typ)400:1(Min) | – |
| Viewing angle range | 45(Typ) | Deg. |
| Response Time | 16 | ms |
| Operating Voltage | 3.3V | V |
| Surface Treatment | Anti-glare | – |
| Outline Dimension | 359.5(W)×206.5(V)×3.2(D)Typ. | mm |
| Input signal | EDP | – |
| Display Colors | 6bit +Hi-FRC | – |
Main Board
| NO. | Description |
|---|---|
| 1 | DC IN (Power input) |
| 2 | Audio (Audio input) |
| 3 | TF (TF card) |
| 4 | RJ11 (Cash drawer port) |
| 5 | RJ45 (COM port) |
| 6 | LAN (LAN port) |
| 7 | USB |
| 8 | USB |
| 9 | COM (only R15,R15-13) |
Warm Tips:
This company does not provide any data restoration and the backup service. The
company is not responsible for damage or loss of data, programs, or storage
media. Please make sure you are in time to backup any information or programs
that you consider valuable. Thank you for your cooperation!
Appendix: Names of toxic and harmful substances or elements and their contents
| Part | Hazardous substance |
|---|---|
| Pb | Hg |
External
device
| ×| ×| ○| ○| ○| ○
Cable part| ×| ○| ○| ○| ○| ○
Switching
power supply
|
×
|
×
|
○
|
○
|
○
|
○
Mainboar d and
PCBA
|
×
|
○
|
○
|
○
|
○
|
○
Memory| ×| ○| ○| ○| ○| ○
HDD/SSD| ×| ○| ○| ○| ○| ○
FAN| ×| ×| ○| ○| ○| ○
Plastic
part
| ○| ○| ○| ○| ○| ○
Aluminum
alloy
| ×| ○| ○| ×| ○| ○
○： Said the content of toxic and harmful substances in all homogeneous
materials in the parts are specified in the SJ/T 113632006 limited the
following requirements.
×： Said the content of toxic and harmful substances in at least one of
the homogeneous materials beyond the limitation of SJ/T11363 – 2006
provisions; on the table in the “X” components, due to technical reasons at
present can not achieve the replacement, follow-up will gradually improve.
Note: the peripheral component contains the keyboard, display, printer, cash drawer, adapter, customer display, laser gun or scanner.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.