NEW BRIGHT 21HA TOY Transmitter Owner’s Manual

June 6, 2024
NEW BRIGHT

NEW BRIGHT - logo

SHOCK. INPUT: 120VAC 60Hz 10W. OUTPUT: 12.8V DC 500mA.

OWNER’S MAN VAL
Please read and understand all precautions prior to use.

Thank you for Choosing a premium New Bright product.

NEW BRIGHT 21HA TOY Transmitter - fig 1NEW BRIGHT 21HA TOY Transmitter - fig
2

Section 1: Table of Contents
Section 2: Component Checklist
Section 3: Vehicle Features and Functions
Section 4: Charging the Battery
Section 5: Vehicle Battery Installation
Section 6: Transmitter Battery Installation
Section 7: Transmitter Features and Functions
Section 8: Proper Use Precautions and Care
Section 9: Trouble Shooting and Support
Section 10: Cautions
Section 11: Warranty Information

Battery

Charging the Battery

IMPORTANT!
The included 12.8V Lithium-Ion battery pack is only PARTIALLY CHARGED prior to shipment and it is recommended the battery be fully charged before first use.

NEW BRIGHT 21HA TOY Transmitter - Charging the battery

  1. Plug the charger into a standard indoor electrical outlet.
  2. Insert the 12.8V rechargeable battery pack securely into the charger (as shown above). Be sure the arrows are properly matched.
  3. Charging Status Light will be solid red while the battery is charging. When charging is complete, the light will blink green.
  4. Charge will last approximately 10-12 minutes depending on terrain and driving style.

Vehicle
Battery Installation
NEW BRIGHT 21HA TOY Transmitter - Vehicle
Locate and align the arrow on the battery pack with the arrow inside the battery compartment. The place battery pack in the battery compartment and slide the battery forward in direction of the arrow. Once in place, turn the locking tab to keep the battery pack secure.![NEW BRIGHT 21HA TOY Transmitter

Transmitter
Battery Installation
Press in TAB and pull back to open battery compartment cover.

NEW BRIGHT 21HA TOY Transmitter - battery

Install 2 “AK batteries as shown, making sure (+) and (—) markings on batteries line up with the (+) and (—) markings in the battery compartment.
Close battery compartment cover.
Cover should click when locked in place.

IMPORTANT: It is normal for the battery pack to become warm after charging an air use.

NEW BRIGHT 21HA TOY Transmitter - fig 4

  1. Forward/Reverse
    Drive Push left joystick forward for forwarding driving. Release to stop. Pull left joystick backward for driving in reverse. Release to stop.

  2. Left/Right Steering
    Push the right joystick to the left for left turning. Release to stop. Push the right joystick to the right for the right turning. Release to stop.

This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time.
The transmitter will automatically sync with the vehicle.

Support

Troubleshooting & Support

Problem – The vehicle does not move or move slowly.
– Make certain there are fresh batteries in the transmitter and that they have been installed in the correct position.
– Are the (+) and (—) markings on the batteries in the same position as the (+) and (—) markings in the Transmitter Battery Compartment?
– Has the Battery Pack been installed in the vehicle?
– Has the rechargeable Battery Pack been fully charged?
– Are the (+) and (—) markings on the Battery Pack in the same position as the (+) and (—) markings in the Battery Compartment?
– Are the metal contact tabs touching, rusty or dirty in the transmitter?
– Make certain that the vehicle ON/OFF switch is in the `ON” position.

Problem – Vehicle moves by itself or exhibits reduced range from the transmitter.

– Make certain there is no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines, or tall buildings as possible to ensure no further radio interference will occur.

FCC CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired o.eration.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, il not installed and used in.

New Bright

Cautions
Do not recharge Battery Pack if it is hot or warm to the touch. Allow Battery Pack to cool before recharging. Recharging a hot or warm Battery Pack will shorten the life of the Pack.
Do not recharge a Battery Pack if it appears to be damaged or leaking.
Always unplug Battery Charger when not in use.
Always remove Battery Pack from Battery Compartment when not in use.
Do not dispose of batteries in a fire. Leakage, explosion, and personal injury may occur.
Dispose of Lithium-Ion Battery Pack properly.
Do not attempt to disassemble Battery Pack or Charger.
Do not use Battery Charger for any use other than instructed in this booklet.
Only an adult should charge Batteries.
Do not attempt jumps or tricks with this vehicle.

New Bright
Warranty Information
USA & Canada 30-Day Limited Warranty
New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such a defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accidents, misuse, or abuse.

Should your item have a defect covered under this warranty, first call the toll-free number listed below? Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization (RA) number and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer).

When returning a defective product, please package the product, the Product Return Form, and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location).

New Bright Industries’ liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential, or contingent damages (except in those states that do not allow this exclusion or limitation).

Valid only in the USA & Canada.
Contact New Bright Industries Customer Service Toll-Free at:
1-877-NBI-TOYS
(1-877-624-8697)
Monday through Friday, 8:00 AM to 5:00 PM Eastern Time
U.S. Toy Sales and Marketing Co. Inc.
30260 Oak Creek Drive — 2nd Floor
Wixom MI 48393
1-877-624-8697 http://www.newbright.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

NEW BRIGHT User Manuals

Related Manuals