AGM T62PRO 4G Smart Phone User Guide

Built to Endure

Quick Start Guide
AGM H3

Features of the product and its accessories described herein rely on the software, phone internal memory, and local networks, and may not be activated or may be limited by local network operators or service providers. Therefore, the descriptions herein may not exactly match the purchased product or its accessories. The manufacturer reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. The manufacturer is not responsible for the legitimacy or quality of any products that you may upload or download through this device including but not limited to text, images, music, movies, and non-integral software. Any consequences arising from the usage of the preceding products on this device are the responsibility of the user.

ABOUT AGM H3

BASIC DESCRIPTION

1. Ejector hole
   —Metal PIN hole to open the SIM/SD tray.

2. SIM/SD tray
   —Supports Nano-SIM and Micro SD card.

3. USB Type-C and Rubber Cover
   —USB Type-C connector.

4. Sensor
   —Optical proximity sensor and Ambient light sensor.

5. Receiver
   —Waterproof receiver. Do not touch with a hard pin.

6. Camera key
   —Long press to quickly activate the camera.
   Short press to take a photo or video when the camera is on

7. Display
   —5.7inch display.

8. Box Speaker
   —Front-loading speaker, do not cover or touch with a hard pin.

9. Main MIC
   —Waterproof MIC. Do not touch with a hard pin.

10. Front Camera
    —Takes front-facing photos.

11. Volume up key
    — Press to increase the phone volume.

12. Volume down key
    — Press decrease the phone volume.
    Press to mute the phone during an incoming call.

13. Power key
    — Long press power key to power phone on/off
    Short press the power key to lock/unlock the screen.

14. Night Vision Camera

15. Macro Camera

16. Fingerprint
    —Fingerprint sensor
    (*Variant dependent. Some versions may not have Fingerprints)

17. NFC area
    (*Variant dependent. Some versions may not have NFC)

18. Sub MIC
    —Noise-reducing waterproof MIC, do not touch with a hard pin.

19. Main Camera
    —Takes photos and videos.

20. Infrared fill light

21. LED
    —LED flashlight.

22. Air balance hole
    —With waterproof film, do not cover or touch with a hard pin

Useful tips:

1. In case the system stops working, press and hold down the power button until your device vibrates then release.
2. Do not cover Receiver, Main MIC, and Sub MIC.
3. Adjust the volume to a comfortable level to prevent hearing damage.

Waterproof warning:

1. AGM H3 is IP68 certified.
2. USB rubber cover and SIM tray must be completely closed to prevent water damage
3. If the phone does come into contact with water, it may affect the audio for a short period. In this case please dry the phone using a clean cloth and then allow it to stand and dry naturally for 30 minutes. This should restore the audio to the correct position.
4. Please do not use any other method, hairdryers for example, other than that listed above to dry your phone as this will affect the phone’s performance.
5. If your phone has received a strong shock or has been bent or twisted ensure that it does not come into contact with water.

PREPARING TO INSTALL THE SIM/MICRO SD CARD

Installing the SIM and Micro SD card:

1. Use the metal ejector pin provided to open the SIM tray.
2. Pull out the SIM tray.
3. Place Nano-SIM in the inside position.
4. Place Nano-SIM or Micro SD card in the outside position.
5. Make sure that the Nano-SIM and Micro SD card metal contact parts are facing down and that the cut corner is aligned with a tray in the correct position as per the diagram shown above.

SIM Tips:

1. The AGM H3 does not support 2 SIM cards data services working together. When inserting 2 SIM cards, you can only choose one of the 2 SIM cards to use 4G services.
   The AGM H3 supports dual SIM dual standby but single pass.
   This means that you cannot use both SIM cards for calls or data services simultaneously.

2. Nano-SIM and Micro SD card socket can only be used for either Nano-SIM or Micro SD card. Place the Nano-SIM vertically or place the Micro SD card horizontally.

3. Do not insert or remove the tray when your phone is powered on.

4. Make sure the cards are correctly aligned and the tray is level before inserting it into the phone.

5. SIM card adapter. A cut SIM card or any other non-standard cards are not allowed. Those non-standard cards may not be recognized by the phone and can damage the tray.

Micro SD Tips:

1. Do not remove the Micro SD card while using the phone, as the card may be damaged. AGM will not be held responsible for any subsequent data loss or card damage resulting from this action.
2. Power off the phone before installing or removing the Micro SD card.
3. Please note that AGM does not provide Micro SD cards.

Network frequency band
GSM: 850/900/1800/1900
WCDMA: B1/2/4/5/8
LTE-FDD: B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28A/28B/66
LTE-TDD: B38/39/40/41

BATTERY AND CHARGING

Note: The AGM H3 battery is not removable

Standby time:

1. The AGM H3 standby time is dependent on different working environments.
2. A Phone receiving a weak network signal and operating at low temperature will have a shortened standby time.
3. Screen brightness, system settings, games, music, video, location services, camera, Bluetooth, Wi-Fi, and applications consume the most battery power.

Charging the phone:

1. Plug the USB Type-C cable into the phone.

2. Connect the USB power cable to the charging power adapter. Some version of AGM H3 does not come along with a power adapter in the box.
   AGM H3 supports CE/CB/FCC/CCC/EAC or equivalent certified chargers.
   The recommended charger output is 5V/1A or 5V/2A.
   Uncertified equipment may cause damage to the device or cause batteries to explode.

3. Open the USB Type-C port cover and connect the USB power cable to the port. Be careful not to use excessive force when plugging the cable. Any damage caused by attempting to insert the connector incorrectly is not covered by the warranty.

4. Plug the charger into an AC mains socket.

5. When charging is complete remove the cable from the device, then unplug the power adapter from the mains socket. Close the USB port cover on the device.

Tips:

1. Fully charge the battery straight from the box, switching off the power when the battery indicator shows full. Please do not leave the phone on charge when full as this may damage the battery and affect performance.
2. Disconnect the charger from the mains power supply when not in use.
3. In the event of a fully discharged battery, please charge the phone for at least 15 minutes before powering it on.
4. The optimum working temperature for the AGM H3 is from 0℃-40℃. Charging the phone outside this temperature range will damage the battery and shorten battery life.
5. Please use the certified charger and cable to ensure maximum performance and safety
6. Please note that the battery will still discharge itself even when the phone is not in use and switched off. If you plan to not use the unit for an extended period, you should still charge it a least every two months to prevent complete power loss and to protect your data.

FREQUENTLY USED FUNCTIONS

Lock/Unlock the screen:
Press the POWER key.
The phone screen will be locked when the phone is not in use

Unlocking the phone:
Press the POWER key to unlock the screen and slide the screen up to unlock the phone.

Taking a Screenshot:
Press the POWER key and VOLUME DOWN key at the same time.

Making a call:

1. Touch the phone icon on the home screen.
2. Open dial pad and input phone number.
3. Touch the call record icon to check call records.
4. Touch the contact icon to check the contact menu.

Sending an SMS:

1. Touch the message icon on the home screen.
2. Create a new message.
3. At the top of the screen, enter a phone number or select a contact. Type your message, then send.

Send an email:

1. Touch the Email icon on the Home or All Apps screen.
2. If you have already signed into an Email account during setup, your email will be synchronized to your device.
   Otherwise, add an email address now.

WIFI Connection:

1. Touch the Settings icon to enter the Settings menu.
2. Touch the WIFI icon to enable or disable WIFI.

Enabling Data:

1. Touch the Settings icon to enter the Settings menu.
2. Touch the SIM card icon to enable data connection.
3. Disable data connection when not used.

Location Services:

1. Touch the Settings icon to enter the Settings menu.
2. Touch Location icon to turn on/off location services.
3. Turn off Location Services to save power when not in use.

Adding a Language:

1. Touch the Settings icon to enter the Settings menu.
2.  Touch the Language icon and select Language.
3. Touch Add icon to choose your language.
4. Press and Hold the language you have chosen and move to the top.

Taking a Photo:

1. Touch the Camera icon to activate the camera menu.
2. Touch the shot icon to take a photo.
3. Touch the switch icon to switch rear and front cameras.
4. Touch the view icon to check photo or video history.
5. Touch the video icon to shoot a video.

Google apps
Google provides entertainment, social network, and business apps. You may require a Google account to access some apps.
Refer to Accounts for more information.
To view more app information, access each app in the help menu.

Tips: Some apps may not be available or may be labeled differently depending on the region or service provider.

Chrome
Search for information and browse web pages.

Gmail
Send or receive emails via the Google Gmail service.

Maps
Find your location on the map, search for locations, and view location information for various places.

YT Music
Discover, listen to, and share music on your device.

Play Movies & TV
Watch videos stored on your device and download various content to watch from the Play Store.

Drive
Store your content on the cloud, access it from anywhere, and share it with others.

Google
Search quickly for items on the Internet or your device.

Play Store
Download third-party apps from the Play Store

Duo
Video and voice call over the network.

FUNCTIONS SHORTCUT MENU

1. Pull down from the status bar and open the notification panel.
2. Press the shortcut icon to activate/de-activate the functions.

ADDITIONAL FUNCTIONS
*App White List

To save energy, parts of AGM smartphones support the application white list function. By enabling function, applications will be closed automatically when the screen is off.
To disable this function, please open the App White List and turn off the auto cleanup switch.

Note: Some models may need to go to the Settings menu, select security, and choose Memory cleanup.

*For models with this function

WARNING
At full volume, extended use of the mobile audio player may damage the user’s hearing.

Please install only officially released applications for the AGM H3.
AGM is not responsible for any 3rd parties’ application data.

COMPLIANCE
This device complies with the essential requirements and other provisions contained in Directive 2014/53/EU.
Copyright © AGM Group Limited
2020. All rights reserved.

THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND DOES NOT CONSTITUTE ANY KIND OF WARRANTY.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Do not use the device with an environment below the minimum -10℃ or over a maximum of 50℃, the device may not work.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device is acting as a slave and operating in the 2.4 GHz (2412 ~2462 MHz) band.

FCC RF EXPOSURE INFORMATION:
WARNING!! Read this information before using your phone
In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radiofrequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna.
Unauthorized antennas modifications or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna.

BODY-WORN OPERATION:
This device was tested for typical body-worn operations with the back/front of the phone kept 1.0cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the user’s body and the back/front of the phone, including the antenna. Third-party belt clips, holsters, and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain a 1.0cm separation distance between the user’s body and the back/front of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov

Your wireless handheld portable telephone is a low-power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies: