qtx 152.745UK 3D Animation Laser User Manual

June 4, 2024
qtx

qtx 152.745UK 3D Animation Laser

qtx-152.745UK-3D-Animation-Laser

INSTRUCTIONS

Please read through this manual thoroughly before use, any damage Caused by misuse of product will not be covered by warranty.
Thank you for choosing the QTX Mesmerizer 3D animation Laser With a stunning set of 440 dynamic and static patterns available including jaw-dropping 3D laser animations, colourful RGBW patterns and wall washes, the Mesmerizer is sure to pack a punch at any party, show or event. 4 control modes including auto, sound to light and DMX512 make this compact and lightweight unit perfect for any occasion large or small.

In the box:
Your Mesmerizer should arrive with you in a single carton in good condition. The carton should contain 1x main unit with bracket, 1x UK IEC mains lead, 1x laser key and 1x user guide.

Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.

Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly. This product is a Class 3B laser and should only be installed and used by persons who are trained in the management of laser radiation and are able to operate in accordance within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be downloaded from: www.avsl.com/assets/documents/hsg95.pdf

Placement

  • Use the included mounting bracket to fix to a stand or lighting truss
  • Use secondary safety fixings if mounting overhead.
  • Keep away from damp or dusty environments.
  • Ensure adequate air-flow around the fixture housings.
  • Ensure adequate access to controls and connections.
  • Do not aim LED or laser output directly into line of sight, as this can result in eye injury.

Cleaning:

  • Use a soft cloth with a neutral detergent to clean the casing as required.
  • Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
  • Do not use strong solvents for cleaning the unit.

Rear panel controls:qtx-152.745UK-3D-Animation-
Laser-1

  1. LCD display
  2. Laser key
  3. Mounting point
  4. IEC mains in
  5. LCD control panel
  6. DMX signal in
  7. DMX signal out

Manual control menu:
Press the “MENU” button to enter the settings menu. Press “UP” and “DOWN” buttons to navigate through various setting functions. Press “ENTER” button to confirm the desired setting.

Menu Function Description
Addr A001-A512 DMX address settings
CHND 21CH DMX 21CH select
7CH DMX 7CH select
Auto Au0 Auto random mode
Au1-Au15 Auto group selections
SPEE SP0-SP9 Auto mode speed adjust-slow to fast
SoUn So0-So15 Sound to light range selections
SoSE SE0-SE9 Sound to light sensitivity adjust-low to high
vEr vE10 Software version 1.0

DMX modes:
The Mesmerizer can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER”. The A on the LED display will begin to flash once it’s received the DMX signal from the controller. This unit has either 7 or 21 DMX channels as indicated in the tables below:

7-CH (start address A001 for 1st unit, A008 for 2nd unit etc):

Channel Function Value Details

CH1

| ****

Dimmer

| 0-9| No function
10-255| Total dimmer, laser on and LED for dimmer


CH2

| ****

Strobe

| 0-9| LED No function
10-255| LED Strobe from slow to fast



CH3

| ****


LED colour control

| 0-9| LED No function
10-79| LED colour macro
80-159| LED jump from slow to fast
160-255| LED gradual change from slow to fast


CH4

| ****





Laser colour control

| 0-1| Laser off
2-69| W-R–B-P-CYAN-Y-G (Fixed colour)
70-79| Total colour change (chase speed controlled by CH5)
80-89| Default colour (chase speed controlled by CH5)
90-94| Rainbow colour (chase speed controlled by CH5)
| | 95-114| 2-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
---|---|---|---
115-139| 3-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
140-164| 4-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
165-189| 8-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
190-224| 16-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
225-229| Colour dynamic chase 1 (speed controlled by CH5)
230-234| Colour dynamic chase 2 (speed controlled by CH5)
235-239| Colour dynamic chase 3 (speed controlled by CH5)
240-244| Colour dynamic chase 4 (speed controlled by CH5)
245-249| Colour dynamic chase 5 (speed controlled by CH5)
250-255| Colour dynamic chase 6 (speed controlled by CH5)



CH5

| ****


Colour chase speed

| 0-9| No function
10-127| Clockwise colour chase from slow to fast
128-255| Anti-clockwise colour chase from slow to fast




CH6

| ****


Inner dynamic effect

| 0-1| No function


3-183

| Inner dynamic effect single option, 2 datas as one effect, speed and colour controlled by CH7


184-248

| Inner dynamic effect group option, 5 datas as one effect, speed and colour controlled by CH7
249-255| Random auto, speed and colour controlled by CH7


CH7

| Inner dynamic effect speed| 0-127| Speed from fast to slow by inner programme
128-255| Speed from fast to slow by DMX controller

21-CH (start address A001 for 1st unit, A022 for 2nd unit etc):

Channel Function Value Details

CH1

| ****

Dimmer

| 0-9| No function
10-255| Total dimmer, laser on and LED for dimmer


CH2

| ****

Strobe

| 0-9| LED No function
10-255| LED Strobe from slow to fast


CH3

| ****

LED colour control

| 0-9| LED No function
10-79| LED colour macro
| | 80-159| LED jump from slow to fast
---|---|---|---
160-255| LED gradual change from slow to fast















CH4

| ****














Laser colour control

| 0-1| Laser off
2-69| W-R–B-P-CYAN-Y-G (Fixed colour)
70-79| Total colour change (chase speed controlled by CH5)
80-89| Default colour (chase speed controlled by CH5)
90-94| Rainbow colour (chase speed controlled by CH5)
95-114| 5-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
115-139| 6-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
140-164| 7-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
165-189| 8-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
190-224| 16-Segment colour option, 5 datas as one step (chase speed controlled by CH5)
225-229| Colour dynamic chase 1 (chase speed controlled by CH5)
230-234| Colour dynamic chase 2 (chase speed controlled by CH5)
235-239| Colour dynamic chase 3 (chase speed controlled by CH5)
240-244| Colour dynamic chase 4 (chase speed controlled by CH5)
245-249| Colour dynamic chase 5 (chase speed controlled by CH5)
250-255| Colour dynamic chase 6 (chase speed controlled by CH5)


CH5

| ****

Colour chase speed

| 0-9| No function
10-127| Clockwise colour chase from slow to fast
128-255| Anti-clockwise colour chase from slow to fast
CH6| Patterns option| 0-255| Patterns option (patterns group controlled by CH7)






CH7

| ****




Patterns group option

| 0-24| Inner patterns group 1
25-49| Inner patterns group 2
50-74| Inner patterns group 3
75-99| Inner patterns group 4
100-124| Inner patterns group 5
125-149| Dynamic patterns group 1
150-174| Dynamic patterns group 2
| | 175-255| No function
---|---|---|---
CH8| Pattern size| 0-255| Pattern size option by manual






CH9

| ****





Pattern auto zoom

| 0-15| Pattern size option
16-55| From small to big speed option
56-95| From big to small speed option
96-135| Big and small zoom speed option
136-175| Cycle zoom effect 1
176-215| Cycle zoom effect 2
216-255| Cycle zoom effect 3



CH10

| ****

Patterns middle rotation

| 0-127| Rotation angle option
128-191| Clockwise rotation speed option
192-255| Anti-clockwise rotation speed option


CH11

| ****

Patterns X rotation

| 0-127| X location option
128-255| X speed option


CH12

| ****

Patterns Y rotation

| 0-127| Y location option
128-255| Y speed option


CH13

| ****

Horizontal remove

| 0-127| Horizontal location option
128-255| Horizontal remove speed from slow to fast


CH14

| ****

Vertical remove

| 0-127| Vertical location option
128-255| Vertical remove speed from slow to fast


CH15

| ****

X wave

| 0-9| No function
10-255| Wave range and speed adjust






CH16

| ****





Patterns drawing

| 0-1| No function
2-63| Manual drawing 1
64-127| Manual drawing 2
128-153| Auto drawing increase
154-179| Auto drawing decrease
180-205| Auto drawing, reverse from increase to decrease
206-255| Auto drawing, syntropy from increase to decrease
CH17| Patterns trace| 0-15| No function
| option| 166-255| Trace option, range from big to small
---|---|---|---
CH18| Trace speed| 0-255| Trace speed from slow to fast
CH19| Gobo wheel| 0-255| Laser gobos wheel change




CH20

| ****


Inner dynamic effect

| 0-1| No function


3-183

| Inner dynamic effect single option, 2 datas as one effect, speed and colour controlled by CH21


184-248

| Inner dynamic effect group option, 5 datas as one effect, speed and colour controlled by CH21
249-255| Random auto, speed and colour controlled by CH21


CH21

| Inner dynamic effect speed| 0-127| Speed from fast to slow by inner programme
128-255| Speed from fast to slow by DMX controller

Specifications

Power supply 110-240Vac, 50/60Hz (IEC)
Power consumption 40W (max)
Fuse rating F2A
Laser power 1500mW
Laser Class 3B
DMX channels 7/21
LED power 6x 3W RGBW
Modes Auto/Sound/DMX512/Master-Slave
Connections IEC power, DMX in/out (XLR), Laser key
Dimensions 210 x 217 x 235mm
Weight 2.1kg

Troubleshooting


No power (mains)

| Check mains voltage is correct and outlet is switched on
---|---
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No laser or light output| Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Check laser key on rear panel is turned on



Unresponsive to DMX

| Check that unit is in DMX mode and ensure the A on the DMX address flashes to confirm it’s receiving a DMX signal
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/ cutting out| Ensure adequate ventilation and unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford Park, Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
www.avsl.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

qtx User Manuals

Related Manuals