Baseus WXHW01 Rock Solid Vehicle Mounted Holder Wireless Charger User Manual
- June 6, 2024
- Baseus
Table of Contents
Baseus WXHW01 Rock Solid Vehicle Mounted Holder Wireless Charger
Product Introduction
This is a vehicle air outlet bracket with an infrared electrodynamic induction holder and wireless charging function. Please read the operation manual carefully before using the product and the manual shall be properly kept for future reference.
Specification
- Product Name: Rock-Solid Vehicle Mounted Holder Wireless Charger
- Model: WXHW01
- Input: 5V=2A/9V-1.67A (Max)
- Frequency: 110-205KHz
- Conversion Efficiency: >70% (Min)
- Charging Distance: <6mm
- Applications: Mobile phones with wireless charging function or external wireless recharging receivers
Note: The above parameters are obtained from actual measurements. Actual parameters may vary due to products or other factors.
Assembling Description
Unscrew the nuts and place them on the bulb; press the bulb into the main nut and then screw up the nuts.
Operation Instructions
-
Press the spring on the rear clamp of the product to make it slightly clamp the air outlet; adjust a proper angle and the two legs of the clamp shall lean against the lower of the air outlet.
-
Insert the charging cable into the jack at the bottom of the bracket and the product will automatically open; the bracket infrared induction will lock up mobile phone after it is placed on the bracket and charging for the mobile phone will be started.
-
LED Induction: The red lamp will be on when the arms are moving; the green lamp will be on when a mobile phone is being charged and the lamp will flicker during detection of impurities.