InWin B1 Mesh Mini ITX Tower Case Gaming Chassis User Manual

: June 6, 2024
: InWin

InWin B1 Mesh Mini ITX Tower Case Gaming Chassis

Product Story

The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs, light gaming PCs or even a LAN rig. The integrated ventilation in the exquisite streamline design provides a better thermal solution, and you can set up your PC vertically or horizontally! The B1 comes with prebuilt InWin 200W, 80 PLUS Gold PSU, InWin 80mm fan and an anti-dust filter. Use the B1 to match your lifestyle!

Specifications

Model	B1	B1 Pure	B1 Mesh
Model Number	IW-CSB1BLK-PS200W	W-CSB1WHI-PS200W	IW-CSB1MESH-PS200W
Colors	Black	White	Black
Case Materials	Tempered Glass, ABS	Plywood, ABS	SPCC, ABS
Case Type	Mini-ITX Tower
M/B Compatibility	Mini-ITX
Expansion Slots	N/A
Maximum Compatibility	CPU Heatsink Height: 60 mm
Front Ports	1 x USB 3.2 Gen 1 HD Audio (CTIA – SPK/Mic)
Internal Drive Bays	2 x 2.5″
Thermal Solution Compatibility	Side: 1 x 80 mm (1 InWin Fan Included)
Power Supply Compatibility	InWin 200W PSU Included
AC Input/Efficient	AC Input: 100 – 240V / 80 PLUS Gold
Product Dimensions (L x W x H)	302 x 238 x 108 mm

InWin’s products comply with RoHS regulation.
Specifications may vary based on different regions.

InWin 200W 80PLUS GOLD PSU

Model	IP-AD200C7-2
Total Power	200W
Material	SECC
Type	ITX
PFC	Active PFC (> 0.95)
Efficiency	80 PLUS® Gold (Up to 90%)
MTBF (Hours)	> 100,000 hrs.
AC Input	100 – 240Vac. 50-60Hz
Operating Temperature Range(° C)	0–40° C
Full Protection	OVP / UVP / SCP / OPP
Safety Certifications	TUV / cTUVus / BSMI / CB / CE / FCC / EAC / RCM / CCC
Dimensions (L x W x H)	52 x 40 x 170 mm 2.05 x 1.6 x 6.7″
Warranty	3 Years
	20+4 Pin Motherboard
	8 (4+4) Pin CPU
	8 (6+2) Pin PCI-E
	4 Pin Peripheral
	SATA (90 Degree)
	Floppy

InWin products comply with RoHS regulations.
Specifications may vary based on different regions.

InWin 80mm Side Fans

Model	DF0801512SELN
Fan Size	80 x 80 x 15 mm
Materials	PBT
Rated Voltage	DC 12V
Rated Power	2.16W
Rated Current	0.18A
Speed Mode	PWM 600-2000 RPM
Air Flow	24.09 CFM
Air Pressure	1.08mm/ H2O
Connector	4-Pin
Noise Level	23.55 dB(A)
Bearing Type	Long Lifespan Sleeve Bearing

InWin products comply with RoHS regulations.
Specifications may vary based on different regions.

Package Contents

B1 Mesh Chassis
InWin 200W 80 PLUS Gold PSU
InWin 80mm Side fan x 1
QR Code Card
Accessories Bag

Accessories Bag

a. Hexagon Head Screws X 8
b. 2.5” HDD Screws X 10
c. Cable Ties X 5
d. Foot-Stand Stickers X 4

Case Structure

SPCC
Logo
Power Button
HDD/Power LED indicator
1 x USB 3.2 Gen 1
HD Audio Port (CTIA ‒ SPK/Mic)
Removable Foot-stand
Release Panel

2.5” Drive Bay
InWin 80mm Side Fan
Motherboard Mounting Area
InWin 200W 80 PLUS Gold PSU
Fan Dust Filter

Installation Guide

(Please follow the related chapters to assemble)

Opening the Chassis

Please release the three screws and lift up the top cover (yellow part).
Lift it from the two sides (green part).

Motherboard Installation

Parts Required: Hexagon Head Screws

Connection Cables

Switch/LED Connector

HD Audio Header

USB 3.2 Header

Fan

SSD

Power

2.5” Drive Bays Installation

Parts Required: 2.5” HDD Screws

i. Release the two screws and remove the bottom cover.

ii. Install the 2.5’’ HDD screws on your SSD screw holes

iii. Attach the SDD in the designated area and push towards the SATA direction.

How to Uninstall the 2.5” Drive Bays

i. Push the panel

ii. Pull towards the direction to release it.

Foot-Stand Stickers Installation (Optional)

Note: After installed, the stickers will be hard to remove. Please use wisely, we suggest using the chassis on vertical position for a better look.

Parts Required: Foot-stand Stickers

i. Release the two screws and remove the bottom cover.

ii. Release the screws of the foot-stand and detach the foot-stand

iii. Place the stickers on each designated area.

Completing Installation

*For more installation instructions, please scan the QR Code or watch the video in the website link: https://youtu.be/cHm2nA2liQY

Notices and Warranty

■ Notices

Please follow the user manual for installation guidelines.
When installing the computer components, please use antistatic precautions to prevent ESD (electrostatic discharge) damage. Failure to take the necessary precautions may result in injury to the installer and/or damage to the machine. Incorrect installation may burnout the motherboard and other system components.
To avoid any damages, please do not use this product for any other purpose than its intended use.
Any modifications may damage the product.
Please handle with care when moving the case.
When storing the case, please keep this product away from high temperatures. Keep away from machines such as heaters that might cause high temperatures.
Please do not put anything in the impeller.
Please do not touch the fan blades when the fan is in operation. Please only use your fan in the computer case

■ Warranty

For more detailed warranty information, please visit the InWin retail website at www.in-win.com.
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.