Lenco CR-605 Alarm Clock with DAB+ and FM Clock Radio User Manual

Lenco CR-605 Alarm Clock with DAB+ and FM Clock Radio

CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame.The device can only be used inmoderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in an astatic-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or shortcircuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with allelectrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instruction about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for nonprofessional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:

    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

Accessories:

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

1. “Menu” button
2. “Preset” button
3. “< Select” button
4. “> Select” button
5. “Snooze Enter/Scan” button
6. “” button
7. “Mode” button
8. “- Volume” button
9. “+ Volume” button
10. Antenna (Extend and alter for better reception)
11. Headphone jack
12. “DC-IN” jack (Plug in appropriate AC adaptor)

Setting the time & date manually
In normal time mode (= radio off), short press the “Preset” button (2). Then use the “< Select >” buttons (3 & 4) to decrease/increase the hours and confirm with the “Snooze/Enter/Scan” button (5). Then set the minutes, date, month and year the same way as setting the hours.
NOTE : The Time and date will be set automatically by the DAB+ and/or FM signal, except if auto update is disable in the time menu.

Alarm Settings
In normal time mode (= radio off), short press the “Mode” button (7). Now use the “< Select >” buttons (3 & 4) to choose between alarm 1 or alarm 2 and confirm with the “Snooze/Enter/Scan” button (5). Now use the “< Select >” buttons (3 & 4) to decrease/increase the hours and confirm with the “Snooze/Enter/Scan” button (5). Now set the minutes, alarm duration (15, 30, 45, 60, 90 minutes), alarm source (buzzer, DAB+, or FM), frequency (daily, once, weekends, weekdays), volume, alarm on/off. When the alarm is triggered, at the configured time, press the “Snooze Enter/Scan” button (5) to snooze. The alarm will trigger again in 9 minutes. Press the power “” button (6) to turn the alarm off.

General Radio Operations

Scan for stations (DAB+ &

FM)(stations will automatically be saved as preset)

| Press and hold down the “Snooze

Enter/Scan” button (5)

Select a stored preset station| Short press the “Preset” button (2). Select

your desired preset with the “< Select >” buttons (3 & 4) and press the “Snooze Enter/Scan” button (5) to confirm you selection.

*Stations are stored automatically when doing an auto scan.

Storing a preset manually| Tune to your desired station. Press and hold

the “Preset” button (2). Select the desired preset location with the “< Select

” buttons (3 & 4) and press the “Snooze Enter/Scan” button (5) to confirm your selection.

DAB+ and FM Display information
Make sure the radio is turned on. Press “MENU” button (1) to change the screen info view

Signal error

Sound quality Time Date

| Date

DAB+ MENU
When in DAB mode, press and hold the “MENU” button (1)

DAB+ mode Specific menu options

a. “Full scan”
b. “Manual Tune”
c. “DRC” – off, high, low
d. “Prune” – Yes or no
e. “TA” – On or Off
Use the “< Select >” buttons (3 & 4) to scroll through the options and press the “Snooze Enter/Scan” button (5) to select.

DRC: Dynamic range compression (DRC) or simply compression is an audio signal processing operation that reduces the volume of loud sounds or amplifies quiet sounds thus reducing or compressing an audio signal’s dynamic range

• PRUNE: is a feature on most Digital Radios that deletes stations that are either no longer transmitting or have moved frequency. These are often marked with ‘?’
• TA: Traffic Announcement. When turned on, the radio will switch to the traffic information channel when receiving the TA signal. When the traffic information ends, the radio will turn back to the channel you where listening to.
  Note: To improve the radio reception, extend the telescopic antenna and alter the position.
  FM MENU: When in FM mode, press and hold the “MENU” button (1)

FM mode Specific menu options

1. “Scan Setting”: How the radio scans for radio stations
2. All stations
3. Strong stations
4. “Audio Setting”
5. Stereo allowed
6. Forced mono

Common settings

1. “System”
2. “Sleep” – off, 15, 30, 45, 60, 90 (minutes)
3. “Alarm” (see Alarm Set above)
4. “Time”

“Set Time/date” (also see the section “Setting the time & date manually”)

1.  “Auto update”
2. Update from any
3. Update from DAB+
4. Update from FM
5. No update
6. “Set 12/24 hour” – set AM/PM or 24-hour
7. “Set date format” – DD MM YYYY, MM DD YYYY
8. “Backlight
9. “Timeout” – 10, 20, 30, 45, 60, 90, 120, 180 (seconds), On
10. “On level” – High, medium, low
11. “Dim level” – High, medium, low
12. “Language” – English, Deutsch, Italiano, Francais, Nederlands, Espanol, Dansk,
13. “Factory reset”
14. “SW version”

Note: To improve the radio reception, extend the telescopic antenna and alter the position.
Listen through a headphone
Plug a headphone into the headphone jack (11) on the back of the unit. (Headphone not included). The headphone volume level can be controlled by the volume buttons (8 & 9)

Technical Specifications

• Adaptor Input 100-240V~50/60 Hz
• Clock input DC 5V/1A
• Connections: 5VDC, 3.5mm headphone out
• Power consumption 5W(Max)
• Power consumption (standby) <1W
• Operating Temperature 0°C-35°C
• Operating position Horizontal
• Dim. unit 150 x 120 x 50 mm (WxDxH)
• Weight 270g

Power supply adaptor: (For EU only)

• Manufacturer: DongGuan Obelieve Electronic Co., Ltd
• Model Number: OBL-0501000E
• Only use the original AC adaptor
• Only use the power supply listed in these user instructions.
  Information| Value and and precision
  ---|---
  Manufacturers name or trade mark,

commercial registration and address

| DongGuan Obelieve

Electronic Co., Ltd

Model Identifier| OBL-0501000E
Input voltage| AC 100-240V
Input AC frequency| 50/60 Hz
Output voltage| 5,0V
Output current| 1,0A
Output Power| 5,0W
Average active efficiency| 74,1%
Efficiency at low load (10%)| 74,1%
No load Power consumption| 0,06W

Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device: This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>