MONSTER MW218002 Smart Watch GT1 User Guide
- June 6, 2024
- Monster
Table of Contents
MONSTER MW218002 Smart Watch GT1
Product Overview
- Screen
- Keys
- Heart rate monitoring area
- Charging port
ON/OFF
ON
- Automatic startup at charging.
- Note: Charge and activate the watch before first use; charge the watch with original charging cable .
- Long press the button to power on the watch.
Shutdown
- Long press the button to power off the watch.
- Shutdown path: Settings > > System > > Shutdown
BUTTON FUNCTION
Short-press
- Return to previous menu level.
- Activate when the screen is off.
- De-activate screen when in the main dial interface.
Long-press
- Long pressing this button will either power on/off the watch.
SCREEN OPERATION
Slide up and down
- Switch functions at the same menu level.
- For a long text \ details.
Slide left and right
- Switch functions at the same menu level .
Touch the screen
- Enter the sub-menu.
- Complete the operation in accordance with the screen touch interface.
Long press the screen
- Long press the screen on the main dial interface will proceed to the dial switch menu.
Download the APP
I Search “Monster Smart” in App Store of iPhone to download;
or
II Search “Monster Smart” in Google play store of Android phone to
download;
or
III Scan the QR code in the watch to download ”Monster Smart”.
Note: After installation, please log in, follow the steps on the interface to obtain superior usage.
PAIRING
Pairing the watch with your phone by choosing “Monster Smart” app.
- Open APP
- Device
- Add Device
- Search
- Select MONSTER GT1
pair and complete the setup
Specifications
| Voltage range | 5V/132mA |
|---|---|
| Rated voltage | 3.3V /<60mA |
| Center frequency | 2402-2480MHz |
| Modulation | GFSK |
| Output power | 4dBm |
| Antenna gain | -1.0 dBi |
| output interface | Contact type |
| Temperature range | 0-70℃ |
| The power supply mode | Battery powered |
| Battery spec | lithium battery：220mAh 3.7V |
| Wireless module | 8762CK |
Product name: Monster GT1
Product model: MW218002
Manufacturer: Shenzhen Mosheng Intelligent Industrial Co., Ltd.
Address: 3E, Block D, Central Avenue, Intersection of Xixiang Avenue and
Baoyuan Road, Laodong Community, Xixiang Street, Baoan District, Shenzhen
Contact Person: Po Honghua
Email:honghua.wu@monster-china.com
Tel: 177 2268 6023
Frequency Range: 2402~2480MHz
Max. Transmit Power: 4dbm
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, Mosheng Intelligent Industrial Co., Ltd. declares that radio equipment
type MW218002 is in compliance with Directive 2014/53/EU, and this product is
allowed to be used in all EU member states.
The full text of the EU declaration of conformity is available at following
This product can be used across EU member states.
BATTERY Warning：CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1) this device may not
cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>