tuya SBD-PTC-20B IP Camera User Manual
- June 6, 2024
- Tuya
Table of Contents
Quick-operation Manual
Main Function Description
Download for App
Search for the ‘Tuya’ app in App Store/App Market, or scan the QR code below
to download.
https://smartapp.tuya.com/tuyasmart
3、Register / Login with the existing account
1. Register
If you do not have an App account yet, you can register an account or log in
via SMS verification code. Please read the current page and the next page for
the description of the registration process.
Click “Create New Account’, enter the Privacy Policy page on Tuya App, click
to Agree, and enter to the registration page for Mobile number or E-mail
address.
2. Login with your existing account
If you have already registered an account, you can skip creating a new
account, click “Log in with an existing account,, enter the login page.
(1) The system automatically selects the current Country/Region, or you can
manually select the Country/Region.
(2) Enter your registered mobile number or e-mail address, enter your password
to log in to the system.
Log in with your social media account login with the social media account
area, log in to the system.
Add Device
A. QR code net-pairing (Recommended)
The product only supports a 2.4GHz Wi-Fi network, It does not support a 5GHz
Wi-Fi network. Before configuring Wi-Fi, please set the router parameters. The
Wi-Fi password should not contain special characters of ~!@#$%A 8i*0-When
configuring Wi-Fi, make sure your router, mobile, and device are as close as
possible for a quick
configuration of the device.
-
The app supports QR code net-pairing and Wi-Fi connection. You can choose to add devices by other options.(Figure 0)
-
Power the camera, and you can broadcast “Wait for Y Fai config*, (if you heard nothing at all, please click “reset” to restore the factory settings).
-
When the mobile phone connecting to Wi-Fi, click ‘Add Device* (figure l)on the Home of the App, select “Security & Sensor,(figure 2)-» “Smart Camera”, click “next step”
(figure 3). -
Enter Wi-Fi account and password, click “Confirm” (figure 4).
Hold the mobile phone screen in front of the camera (figure 5), the distance
between the two should be 15 to 20 cm. (figure 6) Try not to shake the mobile
phone during the
scanning.
when you hear ‘Connect Router’, click “Connect Internet”, and wait for
connecting (figure 7).
Device added successfully (figure 8), you can choose the device name and roan
SCAM.
B. WIFI Fast Connection Distribution Network can be connected according to the
above steps, skipping Fig. 5 and Fig. 6.
5、 Function description
Real-time preview interface
- Setting & Management
- Wi-Fi signal strength
- Sound switch
- SD/HD
- Fullscreen
- Screenshot
- Voice chat
- Record live view
- Playback of video
- PTZ control (The camera can be arbitrarily rotated to give you a different perspecYou can move it up and down, capture any corner you want to view)
- Motion detection alarm (abnormal report notification through intelligent detection of an anomaly in the home. You can go out to work and play confidently.
Set the alarm level according to the camera’s field of view can make the alarm more accurate)
、9 Click，e>” in the upper right corner of the control page for the management and setting of the device.
- Device Name— can modify the device name and device location;
- Share Device— can share this device to other people, enter the people’s mobile phone number; (Note: the entered mobile phone number should be registered with a Tuya App account).
- Device Information —to view Device ID, Wi-Fi signal strength, IP address, Mac address, Device time zone.
- Echo-amazon Alexa Use Echo-amazon Alexa (figure 10).
- Motion detection 一 can set the motion detection switch and motion detection alarm sensitivity.
- Memory card settings 一 switch.
- Value-added Service Purchase—video cloud storage service (optional according to customer needs).
- Firmware Information – Support OTA Remote Upgrade (Do not disconnect during upgrading).
7、Click “Me” on the Home of the App for more services
1. Voice Service: click on the corresponding speaker for the connection
description.
2. Other Services:
-
IFTTT; How to connect to IFTTT;
-
Value-added Service Orders: you can check the purchasing record of purchased value-added services;
-
Al smart detection: push the event picture reported by the smart camera;
-
Video cloud storage: after purchasing the service, the device can encrypt and upload the
video record data to the server, and the user can view the recorded video at any time on the App; -
Mobile phone notification: after purchasing the service, the device can automatically notify the user’s mobile phone when the notification condition is triggered. The device is enabled for multiple-number notification, protecting the safety of you and your family any time and anywhere.
Q: Fail to add device during net-pairing?
A: Please make sure the mobile phone and device are connected to a 2.4GHz
router. Make sure
the correct Wi-Fi password is entered.
Q: Still fail to add a device after re-scanning?
A: If fail to add a device, it is recommended to restart the device or power
off the device, and try again.
Q: The device cannot preview?
A: Check for a weak Wi-Fi signal. You can place the camera close to the
router. If it still doesn’t work, reset the device and add it again.
Q: Why the device is still on the list after resetting the device?
A: The device resetting only resets the camera’s network configuration and
cannot change the configuration on the App. You must log in to the App to
delete the camera from the list
Q: How to connect the camera to another router?
A: The first login to the App to delete and reset the device, and configure
the device again through the App.
Q: Why the device cannot identify an SD card?
A: It is recommended to insert and remove the SD card after powering off the
device. Check if the
SD card is under normal service conditions and the format is FAT32. The App
shall suggest “could not find SD card” under the unstable network of the
mobile phone or the device.
Q: The device is online and has an alarm event, but the mobile phone cannot
receive the information?
A: First confirm that App allows notification in the settings of your mobile
phone. Under normal circumstances, when an anomaly is detected, a message will
appear in the notification bar of your mobile phone. You should set a
notification sound or vibration on your mobile phone.
In addition, when viewing the real-time video in the App, you cannot receive
an alarm of the camera being viewed. Because the device defaults to the camera
being viewed indicating that the user is focusing on the monitoring video,
there is no need for an alarm.
Using the advanced intelligent alarm push algorithm to ensure that the alarm
message will not
be frequently, but the camera will record all the alarm messages and videos.,
After-sale instructions
- Please refer to the real product the manual is for reference only.
- The product is updated in real-time.it shall upgrade without prior notice, please go to the official website for the query.
- The manual contains the basic function description of the product, please check the operation.
- If there is any problem when using the camera, please contact the supplier or company time.
- We have tried our best to ensure comprehensive and accurate manual content But there may still be a deviation from the actual situation. If there are any questions or disputes, please refer to the final interpretation of the company.
- If you do not follow the instruction manual, any loss caused by it will be borne by yourself.
This manual is suitable for consumer products.
Product warranty card
Product name| | Model|
---|---|---|---
Date of purchase| | Distributor|
Shopping mall|
Customer name| | Occupation|
Telephone| | Zipcode|
Work unit|
Contact address|
Instructions for warranty
Warranty period: A year. This warranty card is applicable to the series of
products you purchased by our company.
In order to better serve you, please take good care of this card.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for
uncontrolled environments. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body.