Audio Technology Of New York UO-DPBTSP-WHT Disco Party Bluetooth Speaker User Guide
- June 6, 2024
- Audio Technology Of New York
Table of Contents
Audio Technology Of New York UO-DPBTSP-WHT Disco Party Bluetooth Speaker
User Guide
Overview
Pieces Included
- Speaker
- USB cable
Technical Specifications
- Output power: 3W
- Working voltage: 3.7V
- Frequency response: 100Hz-18KHz SNR: >1= 80dBA
- Distortion: < 1%
- Audio input: Bluetooth, TF card, AUX, FM
- Support for bit rate MP3: 32Kbpgs-320Kbps
- Speaker unit: 45mm, 4ohm
- Input power: Built-in rechargeable polymer battery, 500 mAh, 3.7V or external DC5V
- Regulation: Key adjustment form
- Input sensitivity: 450 +/- 50mV
- Weight: 1 lb
- Dimensions: 4.3″1 x 4.3″w x 4.7″h
Button Operation
- Stage lighting control
- TF card
- Channel selection (FM mode) Short press to go to the last track, Long press to lower volume
- In FM mode, Short press for auto-station search Long press to translated mode In MP3/Line-in/USS/Bluetooth mode, Short press to pause
- Channel selection in FM mode Short press to go to the next track, Long press to increase volume
- Remote control receiver
- On/Off switch
- Audio input 1 DC-5V charge
- USB interface
Features
- Bluetooth® 5.0+EDR enabled speaker
- Wirelessly connects from up to 32.8 ft distance
- Spinning motor creates colorful stage lighting effects
- MP3 player with direct playback TF card builtt-in • FM digital stereo • Stereo audio input connects to computer, digital player, smartphone and more
- Memory saves last used settings
- Built-in energy saving rechargeable lithium-ion battery
- Direct playback USB
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.