Audio Technology Of New York uo-btbb-yel speakers User Guide

June 5, 2024
Audio Technology Of New York

WIRELESS BOOMBOX MANUAL
Audio Technology Of New York uo btbb-yel speakers MANUEL DU BOOMBOX SANS FIL

PLAYBACK:

  1. Set the Function switch to TAPE.
  2. Press the stop button to stop any currently engaged functions.
  3. Insert the cassette with the full reel to the left.
  4. The tape slot should face toward the front.
  5. Press the PLAY button and your player will begin to play back.
  6. Adjust the volume knob to get to the desired volume.
  7. To stop the playback, press the STOP button.

RECORDING:

Insert the cassette with the full reel to the left and the tape slot toward the front, then press the PLAY+REC buttons at the same time and the unit will start to record. Press the STOP button to stop recording.

RADIO:

  1. Set the Function switch to Radio AM/SW or FM position.
  2. Tune in to the desired station by turning the Tuning Control dial.
  3. Adjust the volume using the volume knob to get to the desired level.

USB SD/MMC CARD PLAYING:
Set the Function switch to USB. Insert a USB or SD/MMC card to play.

BLUETOOTH™ FUNCTION:

Turn on the unit’s Bluetooth and the Bluetooth of your cellphone or another mobile device you are trying to connect to. Search for a device named Bluetooth and pair with it. After successful pairing, it will beep. Now your mobile device can play MP3s through Bluetooth through the radio. You can select/play and pause the MP3 by pressing the NEXT/PREV/PLAY buttons on the connected device. If you want to stop using the Bluetooth”‘ function, just turn off the “Bluetooth in on the connected device. If you want to use it again, you only need to open the Bluetooth in your cellphone or other mobile devices again and pair it with Bluetooth” automatically.

SPECIFICATIONS:

Power Supply: AC: 110V/60Hz DC:6V [4×UM-1(SIZE Frequency: AM: 530-1600KHz SW:8.00-16.0MHz FM:87-108MHz

Audio Technology Of New York uo btbb-yel speakers -
fig1Audio Technology Of New York uo
btbb-yel speakers - fig2

CONTROLS

:
1. Telescopic Antenna
2. Handle Strip
3. Right Speaker
4. Cassette Door
5. Left Speaker
6. MIC
7. USB Socket
8. SD Socket
9. LED
10. USB Fast Forward Button
11. USB Play/Pause
12. USB Rewind Button
13. 2 Band Equalizer| 14. Volume Control Knob
15. PAUSE Button
16. STOP/EJ Button
17, Fast Forward Button
18. REW Button
19. PLAY Button
20. REC Button
21. Tuning Knob
22. Band Switch
23. Function Switch
24. External Earphone Jack
25. Battery Comparment
26. AC Jack
---|---

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals