DTEN DBA13310 Mate User Manual
- June 6, 2024
- DTEN
Table of Contents
DBA13310 Mate
DBA13310 DTEN Mate
User manual
Precautions before Use
- This production is a tablet PC, suitable for use in non-tropic areas below 2000 meters, and the mark in the nameplate indicates the product is suitable for use in non-tropic areas.
- Prevent the DTEN Mate from falling to the ground or being strongly impacted otherwise.
- Use only power supplies listed below: Manufacturer: Huizhou Fujia Appliance Tech. Co., Ltd. Model: FJ-SW2120502400U Input: 100-240V~, 50/60Hz, 0.4A Max.; Output: 5V 2.4A
- Do not use it in the long term in any environment where the air is too cold, too hot (>35), too humid, or with too much dust. Do not expose the product to sunlight.
- Avoid using it in the strong magnetic and strong static environment as much as possible.
- Once any water or other liquid splashes onto the product, close it immediately and do not use it until it dries out.
- Do not clean the product with any detergent containing chemical elements or other liquid to avoid causing damage due to corrosion and becoming damp. If cleaning is really necessary, clean it with dry soft cloth tissue paper.
- Our company shall not bear any and all responsibilities for loss or deletion of data inside the machine caused due to abnormal software and hardware operation, maintenance, or any other accident.
- Please back up your important data at any time to avoid loss.
- Please do not disassemble the product by yourself; otherwise, you will lose the right to warranty, and the product will no longer be used.
- Do not dispose of a battery into fire or a hot oven, or mechanically crush or cut off a battery, which can result in an explosion.
- Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- The battery is subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Do not shock the battery at a high attitude.
- The battery charging ambient temperature is 0-45, discharging temperature -10-60, Transport temperature and humidity: 20-30, 45-75%R.H. Storage temperature and humidity range: 20-30, 45-75%R.H.
- Do not ingest battery, Chemical Burn Hazard.
DTEN
DTN Mate Product Guide
Quick Setup
- Power on the DTEN Mate
- Connect the DTEN GO with a display using an HDMI cable
- Follow the instructions on the screen
What’s Inside
+ DTEN Mate x 1 + Power Adapter x 1
Model: DBA13310
+ USB-C Charging Cable x 1
Diagram
Safety Notice
Always use the included power amply Akron operate the unit on a stable and
level surface. Fain to do so may CPAe the unit to fa over and risk fire or
electrical shock. Do not operate the unit under direct suggestions. ;r1
superheated or dusty environments Avoid operation in bathrooms, kitchens, or
rear flammable substances and corrosive gas. Do not use or connect the unit’s
power plug to a damaged or Improper receptacle Do not insert dusty or meal
substances into a power plug or socket. To avoid damaging the power cord, do
not ref the power cord; pat heavy objects on the power cord: operate near
heat sources or pia on the cord when disconnecting the slug from the power
socket Avoid using other appliances within the same power socket. Othe-wise,
overloading the power socket may rest in fire or electric shock. Do not
operate near an open flame. Otherwise, this may Caine an electric shock or a
fire hazard. Do not touch the plug with moist or wet hands. °threwcc this may
recut In extra shock Always keep the unit away from running water. Do not
expose them to rain or wet weather. In the event of a thunderstorm, disconnect
the power sup* and antenna to prevent potential power surges. Do not
disassemble, or attempt to modify the unit as this may result in damage to the
unit and/or electric shock. All repairs must be performed by quaffed service
personnel
Contact a professional for assistance when wall mounting your display. We are
not responsible for any damage to the product or injury to yourself. Do not
power on the display when performing wall mount insulation. It may cause
personal injury due to electric shock.
– Do not expose to [quids.
– For the safest are the fastest charge, use original or certified cables
– This product is suitable for moderate climates orgy.
The maximum ambient temperature during the use of this product must not exceed
40 Celsius degrees
Disclaimer
When any of the following cases occur, the company does not guarantee the
ability of free nuiintenance_
1. Product damages caused by violating user guidance.
2. Hardware damages caused by improver assembly
3. Product damages caused by unauthorized moci‘icafon or maintenance.
4. Product damages caused by using en the unpin-miners (mien-owner-It S.
Product damages caused by an abnormal external force.
6. Product damages caused by natural disasters or other Force Majeure.
7. Privately tear off or damage disassembly tabs.
8.. Unable to provide an effective purchase certificate.
9 The warranty wI be voided If DTEN assesses any of the? dowdy cases that have
occurred
10. Do not disassemble the DTEN product without the supervision of a DTEN
technician. The content Is id, s document is tar reference only. Content is
subject to change without notice. For the most updated information. please
vict dten.com
FCC Statement
This device connotes Part 15 of the FCC Risks. Operation is subject to the
following two conditions: (1) This device may rot cause harmful Interference,
and (2) This device must accept any interference received, inc lac ng
Interference that may cause uncle saw( operation. Any changes or modification
not expressly approved by the party responsible ‘or workplace could vo d the
user’s authority to operate the equipment, NOTE This einiprnent has been
tested and found to comply side the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules These limits are designed to provide
reasonable protection against harmful interference in a residential (Walton.
This equipment generates uses and can radiate radio frequency energy ard, not
installed and used in accordance with the instructions, may rase harmful
interference to rad o communications. However, there is no guarantee that
interference will rot occurs in a pelican installation. if this equipment does
cause harmful interference to ratio or takes on receptor, which can be
determined by turning the equipment off and on, the user Is encouraged to try
to correct the interference by one Of more of the foiowing measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
%Nth the receiver is connected Conn the dealer or an experienced
radio/display technician for help. FCC Radiation Exposure Statement
Radiation Exposure Statement The device has been evaluated to meet
general RF exposure requirements. The device can be used in portable exposure
conditions without restriction.