DTEN DBA0027 Personal Collaboration Device for Your Home Office User Guide
- June 5, 2024
- DTEN
Table of Contents
Zoom for Home
DTEN ME PRODUCT GUIDE
Model: DBA0027
Thanks for choosing DTEN Enjoy your DTEN ME
Quick Setup
- Use the included power adapter to plug in the DTEN ME
- Follow the on-screen instructions to set up the network and register the device.
What’s Inside the Box
- DTEN ME x 1
- Power Adapter (19V-4.73A) x 1
Tips
- Ethernet connection is preferred for stable meetings.
- Please do not disconnect the power without properly shutting down the system.
- If you have any questions, feel free to contact us.
[email protected]
1.866 936.3836
The DTEN Menu- Dashboard
-
Accessing the Menu
Option 1- Menu Button
|
Option 2-3- Finger Swipe
- Available Menu Options
• Power off Restart, Screen sleep
• Network settings
• Device mode selection
• Additional device settings
Diagrams
Indicator Light
- Green light I Camera is in use
- Alternating lights I System is loading
- No light I Camera is not in use
Safety Notice
Do not use the power supply beyond the specification.
Do not place the display on an unstable area or inclined surfaces. Otherwise,
the display may fall over or this may result in fire.
Do not put the display under direct sunlight, superheated or dusty
environment; environment with flammable substances stored or used; in an
environment with flammable or corrosive gas; in a bathroom, kitchen, or
another environment.
Do not use damaged or improper receptacles so as to guarantee good contact
between plug and socket.
Do not attach dust or metal substances to the power plug or socket.
Do not damage the power cord; do not refit the power cord; do not put heavy
objects on the power cord; keep the power cord away from the heat source; do
not pull the power cord while taking it off.
Do not connect too many power plugs in a socket. Otherwise, this may cause
fire owing to power overloading.
Do not put naked flame (such as a turned candle) close to the display.
Otherwise, this may cause an electric shock or a fire hazard. Do not touch the
plug with a moisture hand. Otherwise, this may result in electric shock. Keep
product away from dripping or sprinkling. Do not use expose the display to
rainstorms, especially thunderstorms. Disconnect power supply and antenna plug
to prevent lightning stroke.
Do not disassemble, repair or modify the display at your own discretion. You
may be injured by electric shock or fire. All repairs must be performed by
qualified service personnel.
In case of the following conditions
-
Power failure or unstable voltage.
-
Abnormal sound or smell from the display.
The AC power cord is damaged the display is damaged owing to falling, knocking, or bumping. -
Any liquid of foreign object dropped into the display.
Immediately turn off the display and unplug the power plug from the
receptacle, and contact authorized professional personnel for repair. Make
sure that children do not climb on the display.
Keep the small parts out of the reach of children, to prevent accidental
swallowing.
Do not put vases or other containers filled with fluid on the display.|
If the display is not used for a long period of time such as travel, power off
the display and unplugs the power plug.
Unplug the power plug first before cleaning the display. Use soft cloth
without industrial cleaner. Avoid foreign objects dropping into the display.
If it is required to adjust the position or angle of the display, unplug the
power plug and move it slowly to prevent the display from dropping.
Disconnecting device description: as the disconnecting device, the power plug
cannot be covered. It must be maintained at convenient operation status. Do
not scrub or knock LCD with hard substance, or do not distort or squeeze LCD.
If LCD is damaged and liquid is splashed on the skin, flush the skin with
fresh water for 15 minutes and consult your doctor immediately. When you move
the display by hand, hold four corners at the bottom of the display, do not
apply excessive force to the panel. Do not display still images (mark, video
game, computer video, electronic text, 4:3 mode display image and other images
for more than 2 hours (time may differ with different service conditions of
the display. The warranty does not cover the permanent retention of the image.
Ways to watch display healthily: watch display under proper light. If you
water display under insufficient light for a long time, it may affect your
vision. When you use earphones, adjust the volume level at first to protect
your hearing from super high volume.
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. Batteries (battery
pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire, or the like.
Do not put or store inflammable substances near the display.
Do not expose the display to dripping or splashing, and ensure that no objects
filled with liquid, such as vases, are placed on the display. In case of
leakage of gas or other inflammable gases, do not plug or unplug the power
plug of display or other electric appliances. Turn off the gas supply and open
the windows immediately.
Do not place the display on an unstable surface. The display may fall over and
cause serious personal injury or death. May injuries, particularly to
children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the display.
- Only using furniture that can safely support the display.
Ensuring the display is not overhanging at the edge of the furniture.
Not placing the display on the tall furniture (e.g. cupboard or bookshelf)
without anchoring both the furniture and the display to a suitable support.
No placing the display on cloth or other materials that are located between
the display and furniture.
Educating children about the dangers of climbing on furniture to reach the
display or its controls.
If your existing DTEN product will be retained and relocated, the above
considerations should be applied. Hereby, DTEN declares that this product is
in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC. This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
Notification of the intent to market the device to EU member states may be
necessary due to the restrictions in use in certain countries.
Operations in the 5GHz band are restricted to indoor usage only.
If a display is not positioned in a sufficiently stable location, it can be
potentially hazardous due to falling. Many injuries, particularly to children,
can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the display.
- Only using furniture that can safely support the display.
- Ensuring the display is not overhanging the edge of the supporting furniture.
- Not placing the display on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.
Not standing the display on cloth or other materials placed between the
display and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the
display or its controls.
Altitude during operation (m): less than 5000m.
The lightning flash with the arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated dangerous voltage
within the product enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the follcwing two conditions:
(1)This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/display technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Caution
TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE THE COVER OR SCREWS.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVING TO QUALIFIED SERVICE
PERSONNEL.
Toxic/Hazardous Substance/Element in the Product
Component
| Toxic and Hazardous Substance or Element
---|---
(Pb)| (Hg)| (Cd)| (Cr)| (PBB)|
(PBDE)
Display screen| X| 0| 0| 0| 0|
0
Housing|
0
| 0| 0| 0| 0|
0
PCBA’|
X
| 0| 0| 0| 0|
0
Power cord and cables|
X
| 0| 0| C| 0|
0
Metal parts|
0
|
0
| 0| 0| 0|
0
Packing materials’|
0
| 0| 0| 0| 0|
0
Remote control|
X
| 0| 0| 0| 0|
0
speaker|
Χ
| 0| 0| 0| 0|
0
Accessories’|
0
| 0| 0| 0| 0|
0
This table has been prepared in accordance with SET11364.
x: PCBA includes the PCB and its electronic components
Packing materials include the carton, EPS, etc.
O: Other accessories include the User’s Manual, etc.
x: The content of such toxic/hazardous substances in all homogeneous materials
of such components falls within the content limit specified in GB/T26572-2011.
The content of such toxic/hazardous substances in one or more homogeneous
materials of such components goes beyond the content limit specified in
GB/T26572-2011.
As shown in the above table prepared based on the data provided by our
material suppliers for each type of material and verified by us, this product
contains hazardous substances. The hazardous substances contained in some
materials are irreplaceable at the current technological level although we’ve
been trying to make improvements.
The environment-friendly use period of this product is 10 years (see the
pollution control symbol in the right figure).
Such use period will be maintained under the normal working conditions
specified in the User’s Manual only.
Indicative Description of Regulations on Recycling and Disposal of Waste
Electrical and Electronic Products. To care for and protect the earth better,
please send it to a local manufacturer with nationally recognized
qualifications for recycling according to the national applicable laws and
regulations on the recycling of waste electrical and electronic products when
you no longer need this product or at the end of its service life.
As a Class-B product, it may produce radio interference in living
environments. In such cases, using an additional power plug as the make and
break device will be a practical way to restrain interference
Operating Temperature 0°C To 40°C
Important Statement on Network Service
All contents and services obtained from the product are owned by third parties
and protected by copyright, patent, trademark, and /or other intellectual
property laws. These contents and services are only for your personal non-
commercial purposes, which shall not be used in a way not authorized by the
content owner or service provider.
Under no circumstances shall our company be liable for any direct, indirect,
or unexpected losses or damages arising from your or any third party’s access
to any contents or services or any information or third-party software through
this product.
Third-party services may be subject to change, removal, or discontinuation
without prior notice. Our company does not represent or warrant that some
services or contents will remain accessible at any time.
Our company will not be responsible for any service related to these contents
and services or assume any liability for customer service. For any question or
service request about these contents and services, please directly contact
your content or service provider.
Disclaimer
When any of the following cases occurs, the company does not guarantee the liability of free maintenance.
- Product damages caused by violating the user guidance.
- Hardware damages caused by improper assembly.
- Product damages caused by unauthorized modification or maintenance.
- Product damages caused by using in an unpermitted environment.
- Product damages are caused by abnormal external forces.
- Product damages caused by natural disasters or other force majeure.
- Privately tear off or damage disassembly tabs.
- Unable to provide effective purchase certificate.
- The warranty will be voided if DTEN assesses any of the following cases that have occurred.
- Do not disassemble the DTEN product without the supervision of a DTEN technician.
The content is this document is for reference only.
Content is subject to change without notice.
For the most updated information, please visit dten.com.
DTEN.COM
[email protected]
[email protected]