DCA00ENB DTENGO Collaboration Board User Guide
- June 5, 2024
- DTEN
Table of Contents
Zoom for Home – DTEN GO Product Guide
Quick Setup
- Connect the power
- Connect the DTN on with a display using an HDMI cable
- Follow the instruction on the screen
What’s Inside
+ DTN on x
1 + HDMI Cable x 1
+ Power Supply and Cord x
1 + DTEN Mouse x 1
Tips
Ethernet connection is preferred for the best meeting experience.
SUPPORT@DTEN.COM
1/4 1.866.936.3836
Diagrams
Installation
Mounting Guide
Safety Notice
Always operate the unit on a stable and level surface. Failure to do so may cause the unit to fall over and risk fire or electrical shock. Do not operate the unit under direct sunlight, in superheated or dusty environments. Avoid operation in bathrooms, kitchens, or near flammable substances and corrosive gas. Do not use or connect the unit’s power plug to damaged or improper receptacle Do not insert dusty or metal substances into a power plug or socket. To avoid damaging the power cord, do not refit the power cord: put heavy objects on the power cord: operate near heat sources: or pull on the cord when disconnecting the plug from the power socket. Avoid using other appliances within the same power socket. Otherwise. overloading the power socket may result in fire or electric shock. Do not operate near an open flame. Otherwise. this may cause an electric shock or a fire hazard Do not touch the plug with moist or wet hands. Otherwise, this may result in electric shock. Always keep the unit away from running water. Do not expose the unit to rain or wet weather. In the event of a thunderstorm. disconnect the power supply and antenna to prevent potential power surges. Do not disassemble, repair, or attempt to modify the unit. as this may result in damage to the unit and/or electric shock. All repairs must be performed by qualified service personnel. – Contact a professional for assistance when wall mounting your display. We are not responsible for any damage to the product or injury to yourself. Do not power on the display when performing wall mount installation. It may cause personal injury due to electr – shock – Do not expose to liquids. – For safest and fastest charge. use original or certified cables. – This product is suitable for for moderate climates only. – The maximum ambient temperature during the use of this product must not exceed 40 Celsius degrees
Disclaimer
When any of the following cases occurs. the company does not guarantee the liability of free maintenance.
- Product damages caused by violating user guidance.
- Hardware damages caused by improper assembly.
- Product damages caused by unauthorized modification or maintenance.
- Product damages caused by using in the unpermitted environment.
- Product damages caused by an abnormal external force.
- Product damages caused by natural disasters or other force majeure.
- Privately tear off or damage disassembly tabs.
- Unable to provide an effective purchase certificate.
- The warranty will be voided if DTEN assesses any of the following cases that have occurred.
- Do not disassemble the DTEN product without the supervision of a DTEN technician. The content is this document is for reference only. Content is subject to change without notice. For the most updated information. please visit dten.com.
FCC Statement
This device complies with P.-.1t 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received. including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device.Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/display technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Japan Telec Statement
05.3 GI 4
– 5.3 GHz band is restricted to indoor use due to the Radio Law
5.2 GHz *tauttpatothytiomiaanicogt 5.2 GHz AS%h &tRagt:L:cloilMtilittelienn0
5.2 GHz band is restricted to indoor use only (Except when communicating with
5.2GHz high power base stations or relay stations)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>