DTEN DB50455 55 Inch Touch Screen User Manual
- June 5, 2024
- DTEN
Table of Contents
DB50455 55 Inch Touch Screen
User Manual
Packing List
DTEN D7 55″ X 1
2. Wall Mount Brackets X 1
* The bracket pieces are stored at the bottom of the box (beneath the
foam).
3. Stylus X 1
4. Power Cable (AC 100V-240V) X 1
**** Do not disassemble the D7 without the suspension of a DTEN technician.
Improper use may be subject to voiding the warranty.
What’s Inside
Quick Setup
STEP 1
Plug in the power cord. The display should be turned on.
STEP 2 Follow the instructions on-screen to set up the network. Ethernet connection is preferred.
Zoom Rooms Setup
STEP 1 You need Zoom Rooms to account to sign in.
STEP 2 Select an existing room or create a new room. * Please go to Zoom
Help Center for more info
Tips
- Increase the volume to the max using the volume button (the first button at the back of the unit).
- Ethernet connection is preferred for the best meeting experience.
- To pair with the zoom rooms controller, please visit zoom.us.
- Please do not disconnect the power without properly shutting down the system. 5
- Do not disassemble the DTEN product without the supervision of a DTEN technician.
If you have any questions, feel free to contact us.
[email protected] ‘.
+1.866 936.3836
Port Diagrams
Wall Mount
Screws Information
| Model | 55″ |
|---|---|
| VESA | 300 mm x 400 mm |
| Standard Screw | Ø6 mm x 12 mm |
| Number of Screws | 4 pcs |
Note: Contact a professional for assistance when wall mounting your
display. We are not responsible for any damage to the product or injury to
yourself.
Do not power on the display when performing wall mount installation. It may
cause personal injury due to electric shock.
FCC Warning
a§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
b§ 15.21 Changes or modification warning.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
c§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.