Shenzhen Wanlian Tongda Technology WXC-607B Wireless Charging Instruction Manual
- June 6, 2024
- Shenzhen Wanlian Tongda Technology
Table of Contents
Shenzhen Wanlian Tongda Technology WXC-607B Wireless Charging Instruction
Manual
Compatibility
- iPhone XR /iPhone XS Max / iPhone XS / iPhone X / iPhone8 / iPhone 8 Plus
- Samsung Galaxy S10 / S9 / S8 / S8 Plus / S7 / S7 Edge /S6 / S6 Edge+
- Nexus 7 2nd Gen /Nexus 4 /Nexus 5 /Nexus 6
- Nokia 8 / Nokia Lumia 950XL / 950 / 920 /1020 / 928
Models Requiring a Ql Charging receiver
- Samsung Galaxy S5 /S4 / S3/ Note 4 /3 /2
- Blackberry Z30 Verizon
- Nokia Lumia 820
- LG G3 /G4
Setup & Operation
- Connect the metalmicro-USB cable to the wireless charger as well as to the power adapter. Plug the power adapter into the socket.
- Place the wireless charger on the location you need, the LED lighting glows blue in stand-by mode and is ready for immediate use.
- During the charging process, the LED illumination lights up blue. When charging is completed, the LED lighting goes out. (Note that: Apple device will still keep lighting on when charging is completed)
Attention:
- Do not throw the wireless charger into fire and do not repair it by yourself.
- Protect the wireless charger from moisture and water. The cable should not be connected to
- adapter which voltage is higher than 5V or current is higher than 3A.
- Disconnect the wireless charger before you clean it.
- Do not use the wireless charger in extreme cold or heat environment.
Product Information
- Input: 5.0V= 2.0A
- Fast Input: 9.0V=2.0A
- Output: 5W / 7.5W / 10W
- Transmission Distance: ≤8mm
- Conversion rate:≥76%
Package Includes
- 1x Wireless Charger
- 1x Micro USB Cable
- 1x Specifications
FCC Statement
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>