LAP AR0817-1 Indoor and Outdoor Square LED Bulkhead with PIR Sensor Instruction Manual

LAP AR0817-1 Indoor and Outdoor Square LED Bulkhead with PIR Sensor

IMPORTANT – Please read carefully the separate safety guide before use.

Inside the Box

• Walking Direction

  1. High Sensitivity
  2. Reduced Sensitivity
     

• Avoid aim to the moving objects
  

• Aim the sensor across the path
  

• Avoid installing around the heat sources (i.e. Air vents, heater…)
  

• Protect from rain
  

• Aim to the desired area

• Avoid reflected surfaces (i.e. Mirror, windows, metal)

• Mount the sensor perpendicular to the ground

Installation

L = Brown or Red
N = Blue or Black

Use

1. Detection distance and angle
   

2. Time
   

3. Lux
   

4. Activate sensor override mode
   

5. De-activate sensor override mode
   

Guarantee

• We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product LAP has a manufacturer’s guarantee of 3 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
• To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.
• This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
• This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor etc.), or direct and indirect damage.
• If the product is defective, we will, within a reasonable time, replace or refund.
• Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from.
• The guarantee is in addition to and does not affect your statutory rights.

Care

Troubleshooting

Symptom

| Possible Cause|

Solution

---|---|---
Light does not switch on when there is movement in the coverage area.| The power switch is turned off| Check that the power is switched ON at the circuit breaker/internal wall switch
The light fixture is not properly attached to the mounting plate, if this is a new installation (the pins are not fully seated in the terminal block)| Re- install the light fixture to the base and ensure the pins are fully seated in the terminal block
The circuit wiring is incorrect (if this is a new installation)| Check the wiring connections, ensure no connections are loose
The sensor is aimed in the wrong direction. Detection zone not properly targeted| Re-aim the sensor to cover the desired area
Another light source is causing the unit to think it is daylight.| Turn off surrounding lights and/or re-aim the sensor head
The light comes on during the day.| Unit is located at shaded area.| Shine a flashlight onto the sensor. If the light turns off then the fixture is mounted in an area that does not allow enough light to enter the sensor. Relocate the product
LUX knob is set to daylight position| Turn the LUX knob anti-clockwise to suit desired light setting
The unit may be installed in a relatively dark location| During daylight, turn the LUX control slightly anti-clockwise. When lamp extinguishes, enter detection area, if PIR still activates, adjust LUX further in anti-clockwise direction and enter the

detection zone again. Repeat the above procedure until the sensor does not activate when you enter the detection area

The light comes on for no apparent reason.| The product is wired through a dimmer or timer| Do not use a dimmer or timer to control the product. Replace the dimmer or timer with a standard on/off wall switch
Wind is moving trees and bushes in the detection zone| Change detection zone / Relocate the unit
Cars in the street are being detected| Change detection zone / Relocate the unit
Reflective objects (such as swimming pool) in the coverage area.| Change detection zone / Relocate the unit
Sunlight is falling onto the lens| Mount unit in a sheltered place or change detection zone
Unit is sensing motion in the detection zone| Test the motion sensor by covering up the front curved lens with cardboard to block the view. If the light turns off then something in the detection zone is triggering the sensor. Relocate the unit or change the sensitivity (distance) of the sensor
Coverage area of sensor is poor.| Choose a suitable location for installing the product, away from trees, hot ventilator dusts, street lighting and traffic, which may interfere with its operation| Relocate the unit
The lights stay on continuously.| The product is wired through a dimmer or timer| Do not use a dimmer or timer to control the product. Repelace the dimmer or timer with a standard on/off wall switch
The unit may be suffering from false activation| Cover the sensor lens completely with a thick cloth. This will prevent the sensor from “seeing” anything. If the unit now switches off after the set time duration and does not re-activate, this indicates that the problem was caused by false activation. Slightly adjusting the direction / angle of the sensor head
Ensure the unit is not positioned to detect unwanted objects e.g. cars / people using roads / footpaths next to your property. Occasionally, wind may activate the sensor. (Sometimes passages between buildings etc. can cause a “wind tunnel” effect.)| Slightly adjusting the direction / angle of the sensor head
The unit is operated in the mode of the motion sensor being deactivated| To activate the motion sensor
The lights flash on and off.| Heat or light from the bulbs may be turning the sensor on and off| Slightly adjusting the direction / angle of the sensor head away from the light source
Sensor is sensing reflected light from the light fixture| 1. Change position of light head

aim light away from the reflecting surfaces

2.  Relocate the unit to a different location where it no longer causes reflected light

Sensor will not operate at night.| The level of ambient light in the area may be too bright to allow operation at the current LUX setting| During the hours of darkness, adjust the LUX control slowly anticlockwise / clockwise (choose suitable one) until the lamp just illuminates
Wiring inside electrical came loose| After turning off the fixture, reconnect any loose wiring
No power is being delivered to the fixture| Check that circuit breaker and/or wall switch power is on
Another light source is causing the unit to think it is daylight| Turn off surrounding lights and/or re-aim the sensor head
Light does not switch off after set time has elapsed.| Time is set for too long| Reduce time (TIME knob)
The unit is operated in the mode of the motion sensor being deactivated| To activate the motion sensor
Continuous movement in the detection zone| Change detection zone / Relocate the unit
Light being operated in the detection zone causing sensor to respond as a result of change in temperature| Change detection zone / Relocate the unit
When setting the controls in daylight the detection distance.| Interference by sunlight| Re-set controls at night

Safety

• These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
• All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
• Check the pack and make sure you have all of the parts listed.
• Remove all packaging, wrap etc. from the product.
• Decide on the appropriate location for your product.
• CAUTION: IP44 is guaranteed when the product is properly installed and sealed.
• Always avoid the product to be located at corrosive environment.
• Always refer to the installation drawing for the orientation of the product.
• The product must be securely fixed to the mounting surface using the anchor bolts supplied. The anchor bolts supplied are suitable for masonry or concrete only. Other fixings not supplied and must be purchased.
• IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
• We recommend connecting this product to an external / wall switch in order to deactivate the motion detection function if necessary.
• Wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
• Never put anything on the product or hang anything on any part of this product.
• When the product does not light after installation:
  • Ensure there is no electricity failure
  • Ensure all the connections are secured
• If you have any doubt about installation/use of this product, consult a qualified electrician.
• Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
• It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.
• Non-replaceable control gear.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>