HONOR TMA-B19 Smart Watch User Guide

: May 15, 2024
: Honor

Table of Contents

HONOR TMA-B19 Smart Watch
Product Usage Instructions
Charging
Operation and safety
Accessories and Software Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HONOR TMA-B19 Smart Watch

Product Specifications

Model: TMA-B19
Language: English

Product Usage Instructions

Charging
Connect the metal contacts on the charging dock to those on the back of the device, then put them on a flat surface. Connect the charging dock to a power supply. The device’s screen will light up and display the battery level.

Power Button
Press and hold the button to power on, power off, or restart the device.

Microphone, Speaker, Heart Rate Sensor, Charging Port
Wipe the port, metal contacts, and the device dry during charging to ensure proper functionality.

Downloading App
Scan the QR code to download and install the app for managing the device.

Frequently Asked Questions (FAQ)

Q: How do I charge the device?
A: Connect the metal contacts on the charging dock to those on the back of the device, then connect the dock to a power supply.
Q: How do I power on/off the device?
A: Press and hold the button to power on, power off, or restart the device.
Q: Where can I download the app for managing the device?
A: Scan the QR code provided in the manual to download and install the app.

Charging

Connect the metal contacts on the charging dock to those on the back of the device, then put them on a flat surface. Connect the charging dock to a power supply, the device’s screen will light up and display the battery level.

$HONOR-TMA-B19-Smart-Watch-$1$$

1	Microphone
2	Speaker
3	**Button

Press and hold the button to power on, power off, or restart the device.
4| Heart rate sensor
5| Charging port**

Wipe the port, metal contacts, and the device dry during charging.

Downloading app
Scan the QR code to download and install the app for managing the device.

Copyright © Honor Device Co., Ltd. 2023. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

Trademarks and Permissions
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license.
Other trademarks, product, service and company names mentioned may be the property of their respective owners.

Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at https://www.hihonor.com/privacy-policy/worldwide/.

Blasting Caps and Areas
Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.

Areas with Flammables and Explosives
Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives.

Operation and safety

To prevent possible hearing damage, do not listen at a high volume for long periods.
Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.
Ideal temperatures: -20°C to +35°C for operating, -20°C to +45°C for storage.
Keep the battery away from fire, excessive heat, and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by Honor or an authorized service provider.
When charging, an adapter should be plugged into a socket nearby and easily accessible. Use approved power adapters and chargers.
Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.
This product is not designed to be a medical device, and is not intended to diagnose, treat, cure or prevent any disease. All data and measurements should be used for personal reference only.
If you experience skin discomfort when wearing the device, take it off and consult a doctor.
Wipe the charging port dry before charging.
Adult supervision is advised if children are to use or come into contact with this product.
Switch off your wireless device when requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker.
If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments or near magnetic fields.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the electrolyte touches your skin or splashes into your eyes, immediately flush with clean water and consult a doctor.
Do not place sharp metal objects, such as pins, near the microphone. The microphone may attract these objects and result in injury.
Wireless devices may interfere with the airplane’s flight system. Do not use your device where wireless devices are not allowed according to the airplane company’s regulations.
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
Ensure that the power adapter meets the requirements of Clause Q.1 in IEC62368-1/EN62368-1 and has been tested and approved according to national or local standards.
To ensure the best audio performance of your device’s microphone, use a cloth to wipe the area of the microphone which has been exposed to water. Do not use the microphone until the wet areas are totally dry.
Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp objects, these may damage the device.
Make sure that the wearable and its accessories stay clean and dry. Do not wear the wearable too loosely or tightly during workouts. Clean your wrist and device after the workout. Rinse and dry the device to clean it before putting it back on.
If the wearable is built for swimming and showering, make sure to regularly clean the strap, dry your wrist and the device before wearing it again.
Use the radio equipment in good reception conditions to reduce the amount of radiation received.
Keep radio equipment away from the belly of pregnant women.
Keep radio equipment away from the lower abdomen of teenagers.
Respect of the restrictions of use specific to certain places (hospitals, planes, service stations, schools …).

Disposal and Recycling Information
The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.hihonor.com/.

Reduction of hazardous substances
This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site https://www.hihonor.com/global/legal/certification/.

EU Regulatory Compliance
Statement
Hereby, Honor Device Co., Ltd. declares that this device TMA-B19 is in compliance with the following Directive: RED 2014/53/EU, RoHS 2011/65/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at https://www.hihonor.com/global/legal/certification/. This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.

UK Regulatory Compliance
Hereby, Honor Device Co., Ltd. declares that this device TMA-B19 is in compliance with the following Regulations: Radio Equipment Regulations 2017, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity, and most recent information about accessories & software are available at the following internet address: https://www.hihonor.com/global/legal/certification/.

RF Exposure Information
Important safety information regarding radio frequency (RF) radiation exposure:
RF exposure guidelines require that the device be used at a minimum of 1 cm from the human face and wrist wore only. Failure to observe this guideline may result in RF exposure exceeding limits. For countries that adopt the SAR limit of 2.0 W/kg over 10 grams of tissue: The device complies with RF specifications when used near your head at a distance of 1 cm. The highest reported SAR value: head SAR: 0.15 W/kg, with a limit of 2.0 W/kg over 10 g, at a distance of 1 cm.

Frequency Bands and Power

Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Bluetooth 2.4 GHz: 20 dBm, NFC 13.56MHz: 42 dBμA/m @ 10m.

Accessories and Software Information

It is recommended that the following accessories should be used: Charging dock: HE-050100C01
The product software version is 7.0.55.99
Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules. All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at
https://www.hihonor.com/global/legal/certification/. Please visit https://www.hihonor.com/global/support/ for the recently updated hotline and email address in your country or region. Please go to Settings > About > Regulatory information on the device to view the E-label screen.