LANDER CA6CML20 Cascade Wireless Charging User Manual
- June 5, 2024
- LANDER
Table of Contents
CA6CML20 Cascade Wireless Charging
User Manual
Wireless Charging:
To begin wireless charging, press the button and place the device on top of
the cascade. Cascade will auto-detect when charging via USB-A or USB-C. Simply
plug in your device to start charging.
Battery Level :
Press the button, it will display the battery level, at the same time, it will
turn on wireless charging, USB C, and USB A port, if 60 seconds later, no
device is connected. The cascade will enter sleep mode.
Passthrough Charging
Connect the wall charger to the cascade and it will begin charging. When
cascade is charging, a power passthrough is also available to charge your
device and battery bank at the same time. Wireless charging is the first
priority of passthrough charging. You can put your phone on the top of Cascade
to begin wireless charging. If no device is put on the wireless charger, the
cascade will turn off the wireless charging protocol. You will need to press
the button to activate it again. Cascade also supports both wireless charging
and USB A pass-through charging at the same time while cascade is plugged into
power via USB-c.
Storage and Transportation Guidelines
Trouble Shooting:
If the Boulder does not work:
– Charge the batteries completely
– Check that the USB cord is properly inserted Still not working? Contact us
at lander.com/support
Warnings:
– Monitor use with small children.
– DO NOT stare at the operating lamp, this may harm your eyes. Lander is not
responsible for the consequences, whether direct, indirect, or accidental or
for any other type of damage arising or resulting from the use of its
products.
One (2) Year Warranty and Returns: For information on the limited one-year
warranty for this product, visit
lander.com/warranty.
For questions about returns, visit lander.com/return-
policy.
Certifications and Testing:
This product has been confirmed to comply with European Radio Equipment
Directive (RED) 2014/53/EU.t
This product has met the requirements of EMC (electromagnetic compatibility)
2014/30/EU and the RoHS directive 2011/65/EU.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B). This
product is compliant with the RCM requirements.
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Requirement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. This device must accept any interference,
including interference that may cause undesired operation of the device.
Designed in the Wasatch Mountains, Utah, USA.
©2020 Lander®
2801 N Thanksgiving Way, Ste 300
Lehi, UT 84043
1.844.452.6337
(844) 4-LANDER
support@lander.com
Lander.com/Cascade-Instructions
References
- Cascade Instructions | Lander®
- Return Policy | Lander®
- Neve Cable Lifetime Guarantee Warranty | Lander
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>