LAP 570JK Outdoor Up and Down Wall Light Instruction Manual

LAP 570JK Outdoor Up and Down Wall Light

Safety

• All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation 8S7671 ).

• Check the pack and make sure you have all of the parts listed.

• Remove all packaging, wrap etc. from the product.

• Decide on the appropriate location for your product.

• CAUTION: IP44 is guaranteed when the product is properly installed and sealed.

• Always avoid the product to be located at corrosive environment.

• Always refer to the installation drawing for the orientation of the product.

• The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.

• Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.

• IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.

• Never put anything on the product or hang anything on any part of this product.

• Never use the terminal cables to bear the product weight.

• When the product does not light after installation:

  Ensure there is no electricity failure
  Ensure all the connections alfe secured

• If you have any doubt about installation / use of this product, consult a qualified electrician.

• Always disconnect the product from mains at least 1 O minutes allowing to cool down before any maintenance or adjustment.

• It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Technical Data

space available)
| Conformity with all relevant EC Directive requirements.
| Class I product, must be connected to earth
| Minimum distance from lighted objects (0.5 metres)
| Do not use this product without the glass shield being in place. If the glass shield is cracked or damaged, it must be replaced using only heat resistant tempered glass.
| Splash-proof
| Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
| xx-year; yy-week of the year

Guarantee

Congratulations on your purchase of a quality LAP product. We are confident in the quality of this product, but for your peace of mind it comes with a 3 year guarantee. If your product develops a fault within the guarantee period, please contact the retailer where the item was purchased, with your proof of purchase, where the product will be replaced or refunded.
This guarantee specifically excludes:

• Fair wear and tear
• Misuse or abuse
• Lack of routine maintenance (see care instructions)
• Failure of fixings
• Accidental damage
• Cosmetic damage
• Failure to follow the manufacturer’s fitting/ care and maintenance instructions

This guarantee is limited to the purchase price of the product and the manufacturer’s liability does not extend to any costs damages or losses whatsoever in excess of that amount. Proof of purchase is required. This guarantee does not affect your statutory rights.

Assembly & Installation

Manufacturer • Fabricant • Producent: UK Manufacturer:
Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom

EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E, 1011 VM Amsterdam,
The Netherlands
www.kingfisher.com/products
EN www.diy.com
www.screwfix.com
www.screwfix.ie
To view instruction manuals online, visitwww.kingfisher.com/products

References

• Bricolage, jardinage et aménagement de la maison | Castorama
• B&Q | DIY Products at Everyday Low Prices | DIY at B&Q

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>