Sure Wave CQL1430-B Bluetooth Wireless Speaker Instruction Manual
- June 6, 2024
- Sure Wave
Table of Contents
Sure Wave CQL1430-B Bluetooth Wireless Speaker
Instruction Manual (Read before proceeding)
Power:
-
Works on an internal rechargeable battery. Please charge your speaker fully before first use.
To charge the battery :
Using a Micro USB cable (included), insert the jack into the “Charging” jack located on the back of the unit and then plug the USB connecter into the USB port on a computer for charging. -
A red light will indicate the charging situation. When the battery is full, the red light will turn off automatically.
Bluetooth Speaker Operation
- Turn on the unit by pushing the switch on the back to “ ****“position. The blue light will start blinking to indicate the speaker is in pairing mode and searching for your Bluetooth mobile device.
- Open the Bluetooth function on your device and search the speaker named “SMPS-560”. After selecting this speaker, your device will pair without a password. (If required, enter the password “0000” to finalize the paring). The Blue light will begin to flash slowly after the pair is complete.
- Start playing music on your device. Keep your device within 33feet (10meter) of your speaker.
- Adjust the volume of your device to a comfortable level.
- Turn off the unit when not in use.
Universal Speaker Operation
- For other music devices without Bluetooth, turn on the unit by pushing the switch to the “Aux” position, use the included audio input cable, insert the USB jacks into the “AUX-IN” jack and into the earphone jack on your device.
- Turn on the unit and start playing music.
- Turn off the unit when not in use.
Color Light Operation
- Turn on the color light by pushing the switch to the “ON” position
- Translucent cabinet changes in 7 colors gradually every 5 seconds.
- Turn off the color light by pushing the switch to the “OFF” position
Caution:
This is not a toy. Please keep away from small children. Please keep away from
water/heat. Low power may cause poor connection even no working of Bluetooth.
Do not overcharge the battery. The battery pack shall not be exposed to
excessive heat such as sunshine, fire, or the like.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.