Semetor Electronics S-28 Multi-Function Wireless Charger User Manual

Multi-Function Wireless Charger

PRODUCTS INSTRUCTIONS

Thank you so much for choosing our product, please read the manual carefully before using the product

Tips for use

• A LED digital dual setting alarm clock
• A three-color & non speed touch dimming LED lamp
• A earbuds &smart watch charging cable storage bas
• A fast wireless charger
• A phone stand

|
---|---

Product layout

1. Mobile phone charging area
2. PP lampshade
3. Apple headset charging slotcv
4. mobile phone stand
5. Smart watch charging contactor
6. Lamp power button| 7. clock touch switch
8. Clock setting button
9. USB output port 5V/1A
10. USB charging port
11. Type-C interface
12. charging indicator light
---|---

DIRECTIONS FOR OPERATING THE WIRELESS CHARGER

1. Take the provided charging cable and match up the charging prongs
2. After the product is powered on ,the charging indcator light will flash blue and white alternately till turn white
3. Place your wireless charging capable device on the charger to start charging LED light will turn blue to indicate the device is charging

DIRECTIONS FOR FOR OPERATING THE LAMP

• 1st Tap on the lamp power button to turn on warm light
• 2nd Tap will turn on the cool white light
• 3rd Tap will turn on the pure white light
• 4th Tap will turn off the lamp
• Hold and press the lamp power button to turn on non-speed dimming light

DIRECTIONS FOR OPERATING THE STORAGE CHARING BASE

Step1:
place the smartwatch USB interface to the silicon cover

Step2
Be sure to place the smart watch charging contactor fully back to the silion cover

Step3
Be sure to place the silicon cover back to the notch and USB inter face to port

STORAGE CHARGING CASE

The storage case saves 2 USB ports for smartwatch and earbuds charing cable

Easily portable storage base to bring it whereve you go

DIRECTION S FOR OPERATING THE ALARM CLOCK

①　MODE
Short press→clock setting→12·24 hours→alarm→year, month and day press and hold for 3 seconds to back to clock display

②　SWITCH
When goes to clock display mode→ short press to switch 12/24 hours →alarm →year, month, and day

③　UP
When the alarm does not go off Short press to switch screen brightness When the alarm goes off Short press snooze Long press for 3 seconds to turn off the alarm
(Note: When the alarm sounds, press other keys to interrupt and stop the alarm)In the setting screen: number increases

④　DOWN
Short press to control the alarm volume Press and hold for 3 seconds to turn on/off the alarm In the setting screen: Short press to increase the number

APPLICABLE DEVICE

The wireless charger pad is compatible with all Qi-compatible wireless charging device including but limit to the iphone: iPhone8 iPhone XR iPhoneXS iPhone XS Max
Samsung: Galaxy S6 Galaxy S7 Galaxy S8 Galaxy S9 Note Note9 Huawei: Mate RS Mate20 Pro Mate20rs P30Pro Xiaomi: MIX2S MIX3 (the above are some mainstream devices)

NOTE:
This product does not come with its own power and adaptor to power the unit from a computer portable USB source simply connect the USB-A connector on the charing cable provided to the USB power source, Touse withe an AC USB wall charger be sure to alaways use a 5V/9Vadapter to take advantage of the fast charging capablities make sure to use qualcomn quick charge compatible adapter

IMPORTANT SAFETY IN FOR MATION

Don’t not use the wireless changer pad for anging other than its intended use Keep out of reach of children
Do not attempt to disassemble or modify your changer gangway
Dont not expose the wireless changer pad to exthe mely high or estre mely low temperatures
Keep the wireless changer pad away from all heat sources including direct sunlight water or another liqueiel
Don’t not operate the charger if it has become wet or moist the unit is not unter proot or water-resistant
Don’t damage the USB changing cable by bending -twisting pulling or heating it
Do not use har8h chemicals as alcohol benzene thinners etc or ole tergents to cleerm your charger

WIRELESS CHARGER SPECIFICATION

Product material: imported ABS+PP+hardware
Input voltage: DC5V/2.1A9V/1.67A
Charging Voltage:5V/1A-9V/1.2A
Power:10 W
Charging efficiency: 75%
Product size: 202×170×174
The power charging port is an universal type-c port

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>