eWeLink KR2201BY Mini WIFI Smart Switch User Manual

KR2201BY Mini WIFI Smart Switch

“`html

Specifications

• Name: MINI WIFI Smart Switch

• Input: AC 90-250V 50/60Hz

• Output: AC 90-250V 50/60Hz

• Operating Systems: Android 5.0 & iOS 10 or
  higher

• Frequency: WiFi (802.11 b/g/n 2.4GHz)

• Standard: 30A

• Material: ABS

• Dimension: 804330mm

Installation Instructions

1. Power off: To avoid electric shocks, please
   consult the dealer or a qualified professional for help when
   installing and repairing.

2. Wiring instruction: Make sure correct wiring
   before powering the device on.

Pre-Usage Checklist

• Your phone has been connected to a 2.4G WiFi.

• Your phone system version needs to be Android 5.0/iOS 10 or
  higher.

• Your phone must be able to access the APP store and download
  the APP.

• If your router has set Mac address filtering, please enter the
  router settings to turn it off.

Pairing with eWeLink APP

1. Download APP: Install the eWeLink APP on your
   smartphone.

2. Connect to WiFi: Connect your phone to 2.4GHz
   WiFi and turn on Bluetooth.

3. Pairing Button: Long press the pairing button
   for more than 5 seconds until the LED indicator blinks.

4. Add Device: Open the eWeLink APP, tap +,
   select Bluetooth Pairing, and follow on-screen instructions to
   pair.

Compatible Pairing Mode

1. If Quick Pairing Mode fails, try Compatible Pairing Mode by
   following the specified steps in the user manual.

Pairing with RM2.4G Remote Control

1. To pair with RM2.4G remote control, follow the instructions in
   the user manual.

FAQ

Q: What should I do if the device does not pair
successfully?

A: If pairing fails, ensure you are following
the correct steps as outlined in the user manual. You may also try
resetting the device and retrying the pairing process.

“`

/User Manual

Product Introduction

Power /WiFi indicator light (red)
Pairing Button/ Manual Switch

AC Input

L

N

AC Output

L

N

MINI WIFI
MINI WIFI Smart Switch

Specifications

Name
Input
Output Operating Systems Frequency Standard Current
Material
Dimension

MINI WIFI Smart Switch AC 90-250V 50/60Hz AC 90-250V 50/60Hz Android 5.0 & iOS 10) or higher WiFi(802.11 b/g/n 2.4GHz) 30A ABS 804330mm

WiFi/GPRS
N-Out L-Out N-In L-In

Installation instructions 1 Power off
To avoid electric shocks,please consult thedealer or a qualified professional for helpwhen installing and repairing.
2 Wiring instruction
Make sure correct wiring before powering the device on.

Please check the following before using the device
Your phone has been connected to a 2.4G WiFi.
Your phone system version needs to be Android 5.0/iOS 10 or higher.
Your phone must be able to access the APP store and download the APP.
If your router has set Mac address filtering, please enter the router settings to turn off it.

2 Connect your phone to 2.4GHz WiFi and turn on Bluetooth.
3 Long press pairing button for more than 5 seconds until blus LED indicator blinks twice quickly and keeps on once to enter pairing mode.
4 Open eWelink APP,tap + at the bottom of
the screen,select”Bluetooth Pairing”,click “Next”,it will automatically scan device.

Router WiFi

Internet

Server

AC Input

L

N

AC Output

L

N

Androld/iOS

AC Input

L

N

AC Output

L

N

AC 90-250V L-In N-In

Pairing with eWeLink APP 1 Download APP
N-Out L-Out

5 Click discovered device and then select the WiFi, confirm that the relevant information is correct, click “Save”,and wait for the devi -ceto be connected.

Scan device Nearby devices ck_10015dd292

To connect

Select WiFi WiFi nearby QIHANG_5G QIHANG_2.4G DTf e HTYHD

The name the actual

of scanned situation.

device

will

be

changed,please

refer

to

WiFi information in the manual is for display and don’t any practical effect.Please refer to the actual WiFi.

have

Add Device Connecting Please set the device in pairing mode based on the user manual. Then take the device and your smart phone as close to the WiFi router as possible.
176s
Connecting device Retrieving device info Registering device Sending network into
6 After device is successfully added,you can change device name and click “Complete”.
Add Device

Device added successfully.

Name Living room lamps

x

Add to rooms saloon bedroom other Toilet

Done

Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode “to pair.
1 Long press Pairing button for 5s until the WiFi LED indicator changes in a cycle oftwo short flashes and one long flash and release. Long press Pairing button for 5s again until the WiFi LED indicator flashes quickly. Then, the device entersCompatible Pairing Mode.
2 Tap “+” and select ” Compatible Pairing Mode ” on APP.Select Wi-Fi SSID with ITEAD-** and enter the password 12345678, and thengo back to eWeLink APP and tap “Next”. Be patient until pairing completes.

Pairing with RM2.4G remote control

Wireless stick-on smart wall switch (remote controller)

RM 2.4G remote controller

or
1 Open the added device and click the settings icon in the upper right corner.

2 Select “eWeLink Remote” Device Settings

/User Manual
MINI WIFI
MINI WIFI Smart Switch

/WiFi() /

AC Input

L

N

AC Output

L

N

N-Out L-Out N-In L-In

1

2.4G WiFi; 5.0,IOS 10.0; APPAPP; Mac, Mac

,
2

AC Input

L

N

AC Output

L

N

MINI WIFI AC 90-250V 50/60Hz AC 90-250V 50/60Hz (Android 4.1 & iOS 9.0) WiFi(802.11 b/g/n 2.4GHz) ABS 804330mm

AC Input

L

N

AC Output

L

N

AC 90-250V

APP 1 APP

2 2.4GHzWiFi,;
3 5
4 APP + ” “””APP

5 WiFi””

ck_10015dd292

WiFi WiFi QIHANG_5G QIHANG_2.4G DTf e HTYHD

• • WiFi,
    WiFi

WiFi
176s

6 “”

x

(AP)
,” (AP)” 1 5″
” , 5 ” ” , 2 app,”+”,”” Wi-FiITEAD**,:12345678,” “app,””,
RM2.4G
2 “”
1 ,

2 Follow the prompts for the next step.The LED indicator “flashes once again”means the pairing is successful.

Add Device

Remote added successfully

Remote eWeLink Remote0402

x

Features
This device is WiFi smart switch. Use your smart phone inTurn devices on or off in your home anywhere, set timer on/off,Share with your family to control and so on.

App Control

Single/Countdown Ti m i n g

Linked Scene

Voice Control

Power-on State

eWeLink has integrated with mainstream AI platforms:

eWeLink Remote Learning…

Done
Note:If you need to delete the RM2.4G remote control,enter the added interface and delete it.

2 , ,

WiFi /,
APP

“e” e AI
:RM2.4G, ,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>