HUMAX C61-500 Client Receiver User Manual

HUMAX C61-500 Client Receiver

Product Information

Specifications

• Product Name: DIRECTV C61-500
• Product Code: C61-500
• Target Market: US
• Customer: DirecTV / AT&T
• Business Type: Finished Goods
• Product Type: HD / SD Front-end Type
• Middle ware: Embedded CAS
• EAN Code: 91-00814
• Product Category: STB, Client
• Front-end Type: Satellite
• Digital Broadcasting Standard: DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-C, DVB-C2, ARIB, ATSC (ISDB-T)
• MPEG Standard: MPEG2, MPEG4
• Special Function: MoCA 2.0 Client

Hardware Specification

General Specification

• System CPU: BCM73649
• NOR Flash: MX25L6456EXCI-10G
• NAND Flash: JS27HU1G08SCDA-25
• DRAM: H5TQ4G63EFR-TEC
• Front End: Satellite (Input frequency range: 400Mhz ~ 700Mhz)
• MoCA: Supported

Software Specification
No software specification information is provided in the user manual.

Industrial Design and Mechanical

Design Overview
No design overview information is provided in the user manual.

Industrial Design Specification
No industrial design specification information is provided in the user manual.

Product Usage Instructions

Installation
To install the DIRECTV C61-500 HD Satellite Receiver GENIE Mini client box, follow these steps:

1. Connect the provided satellite dish to the RF input of the C61-500 box.
2. Connect the HDMI or AV cable from the C61-500 box to your TV.
3. Connect the power adapter to the C61-500 box and plug it into a power outlet.
4. Turn on your TV and set it to the correct input source.
5. Follow the on-screen instructions to complete the initial setup process.

Using the Remote Control
The remote control included with the C61-500 box allows you to navigate through the user interface and control various functions. Here are some key actions:

• Use the arrow keys to navigate through menus and options.
• Press the OK or Enter button to select an item or confirm a choice.
• Press the Back or Exit button to go back to the previous screen or exit a menu.
• Use the numeric keypad to enter channel numbers or PIN codes.
• Press the Guide button to access the program guide.
• Press the DVR button to access your recorded programs.
• Use the Volume and Mute buttons to control the audio.

Troubleshooting
If you encounter any issues with the DIRECTV C61-500 box, try the following troubleshooting steps:

1. Check all cable connections to ensure they are securely pluggedin.
2. Restart the C61-500 box by unplugging it from the power outlet, waiting for a few seconds, and then plugging it back in.
3. Make sure your TV is set to the correct input source.
4. Check for any software updates for the C61-500 box and install them if available.
5. If the issue persists, contact customer support for further assistance.

Frequently Asked Questions (FAQ)

• Q: What is the input frequency range for the satellite front end?
  A: The input frequency range for the satellite front end is 400Mhz to 700Mhz.

• Q: Can I use the C61-500 box with cable or terrestrial broadcasting?
  A: No, the C61-500 box is specifically designed for HD satellite reception and cannot be used with cable or terrestrialbroadcasting.

Product Specification < C61-500 >
V 1.4

HUMAX Co. Ltd,
Americas Marketing Team

Overview

DIRECTV C61-500 is HD Satellite Receiver GENIE Mini client box.

Product Summary

H/W specification

General Specification

System
CPU| BCM73649|
NOR Flash| MX25L6456EXCI-10G| 8MB SNOR
NAND Flash| JS27HU1G08SCDA-25| 128MB NAND
DRAM| H5TQ4G63EFR-TEC| DDR3-2133, 512MB
Front End
MoCA| |
Input frequency range| 400Mhz ~ 700Mhz| MoCA2.0
Input impedance| 75 ohm|
TX signal level| Between -1dBm and +7dBm|
RX sensitivity| Min. PHY Rate = 95.62 Mbps in conditions of RX power level -63 dBm|
Modulation| OFDM|
Video/Audio Processing
Video Decoding| MPEG-2 part 2 (ISO/IEC 13818-2) Main Profile @ Main Level MPEG-4, part 10 (AVC) Main and High profile Level 4.0|
** Audio Decoding| MPEG-1 Part 3 (Layer II, AC-3)
MPEG-4 Part 3 (HE-AAC), and ATSC A/52A [3, 5, and 12] (Dolby Digital) AAC+ (AAC-SBR)|
Output Resolution| 1920x1080p(30/24), 1920x1080i, 1280x720p, 720x480p, 720x480i|
Audio Mode| Single/Dual Mono/Stereo/Joint Stereo|
Conditional Access Interface & DRM
CAS| N/A|
DRM| N/A|
CI+| N/A|
HW Security| N/A| No CAS
I/O Specification
Mini-DIN| Mini-DIN Output Connector (10-pin mini-DIN connector)|
HDMI Out| A type connector(x1)|
S/PDIF Out| S/PDIF Output Connector|
USB| USB 2.0 Port (Type “A” connector)|
Items| Description| Remark
---|---|---
Power Supply
Power Type| EPS10R3-16| EPS10R3-16
Power Consumption (Operation mode)| 5.26W|
Power Consumption (Standby mode)| 4.15W|
Input Voltage| 120V +/- 15%, 60Hz|
Power Indicator| Yes(Green LED)|
Power Switch| N/A|
Protection| Separate internal fuse & lightning protection|
Max Load for USB1| 500mA|
Physical Specification
Size (W x H x D)| 150 x 93 x 26mm(W x D x H)|
Weight| 251.5g|
Front Panel
LED display| 1x Power indicator(Blue) / 1x Network status(Yellow/Green)|
Control Buttons| 1x Power key/ 1 x RBR key(side)|
RCU Sensor| 1x IR IN/1 x RF4CE|
Rear Panel**
SWiM IN| F type connector(x1)|
Mini-DIN| 10-pin mini-DIN connector(dedicated to DirecTV)(x1)|
HDMI Out| A type connector(x1)|
S/PDIF Out| Coaxial connector(x1)|
USB| A type 2.0 connector(x1)|
Power| DC Jack connector(x1) with LED|

Regulation & Certification

S/W specification
The Client interoperates with the DIRECTV Home Media Servers such as HR34 and HR44 which are, in the same way, an RVU Protocol Specification compliant server with extensions and refinements specific to DIRECTV.
The client extensions and refinements are designed to ensure that DIRECTV users experience familiar and intuitive operation of the client within the Home Media Server environment. The Clients display live and recorded TV, interactive applications, DIRECTV Cinema and Broadband applications content on a local TV. All tuning, recording, and most user interface screens displayed on the client’s local TV are generated on the Home Media Server using the RVU Remote User Interface (RUI) sub-protocol.
User interface screens generated and displayed locally by the\ clients include capabilities provided locally by most consumer electronic devices such as, setup for closed captioning, video formats, remote control, graphics preferences and client specific setup screens where applicable. User interface screens and OSDs generated locally by the client use the RVU Local User Interface (LUI) sub-protocol.

• More specific requirements are in http://depa.humaxdigital.com/pjt_directtv/DIRECTV%20Spec/SW/RVU_Client/SPS-
• 7002_DIRECTV_RVU_Client_Software_Requirements/SPS-
• 7002_DIRECTV_RVU_Client_Software_Requirements_v1.8.2.doc

Industrial Design and Mechanical

Design Overview

Front and Rear View (Example)

[Front Panel Layout]

[Rear Panel Layout]

[Bottom Layout]

[Top/Side Layout]

[Wall mount view]

Industrial Design specification

Smartcard

slot

| N/A
Material| Front| Plastic ( O ), Metal ( )
Top| Plastic ( O ), Metal ( )
Bottom| Plastic ( O ), Metal ( )
LED| 1x Power status(Blue)/ 1x Network status(Yellow/Green)
7-SEG| N/A
---|---
LCD| N/A
VFD| N/A
USB| 1x A type Connector
Logo| Front| Dolby Audio /Energy Star / AT&T / DIRECTV
Rear| HDMI/USB
TOP| N/A

Label

| Front|
Rear
TOP
**** Bottom
| |

RF Information

• Modulation technique: DSSS_O-QPSK
• Antenna specification: PCB Antenna
• Antenna gain: 2.9dBi(ANT 1), 2.6dBi(ANT 2)
• Frequency range: 2 425MHz~2 475MHz

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission ( FCC): This equipment complies with Part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.

Do Not Disassemble This Equipment
It does not contain any user-serviceable components. We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources.

FCC RF Radiation Exposure Statement
MPE/SAR/RF Exposure Information. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment was verified for RF exposure and found to comply with Council Recommendation 1999/519/EC and FCC OET-65 RF exposure requirements.

CAUTION —Additional Safety Instructions

WARNING : While this equipment is in operation, a separation distance of at least 20 centimeters (equal to 8 inches) must be maintained between the antenna inside the equipment and the bodies of all persons exposed to the antenna in order to meet the FCC RF exposure guidelines. Making changes to the antenna or the equipment is not permitted. Doing so may result in the equipment exceeding the FCC RF exposure guidelines. This equipment must not be co-located or operated in conjunction with any other antenna or radio transmitter.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radi-ate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

*Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
PRODUCED BY DIRECTV. NOT FOR PUBLICATION OR CUSTOMER DISTRIBUTION. ©2022 DIRECTV. DIRECTV and all other DIRECTV marks are trademarks of DIRECTV, LLC. All other marks are the property of their respective owners.

• HUMAX Co., Ltd. http://www.humaxdigital.com
• Head Office Tel: +82 31 331 9400
• [Private] Product Specification Template Revision 2.1/2011MAR06 This template is maintained by Marketing division, HUMAX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>