HUMAX 3 Pin Smart WiFi Power Plug User Guide
- June 11, 2024
- HUMAX
Table of Contents
HUMAX 3 Pin Smart WiFi Power Plug
Product Information
The Wi-Fi Smart Plug is a smart device that allows you to remotely control electronic devices at your home or office using your smartphone or tablet. It connects to your home Wi-Fi network and can be controlled using the Humax Smart Living app, available for download from the Apple App Store or Google Play Store.
Specifications
- Device Type: Wi-Fi Smart Plug
- Compatibility: iOS 8.0 or later, Android 4.4 or later
- Wireless Connectivity: Wi-Fi 802.11 b/g/n
- Input: AC 100-240V 50/60Hz
- Output: AC 100-240V 50/60Hz, Max 10A
Product Usage Instructions
Follow the steps below to set up and use your Wi-Fi Smart Plug:
App Download & Registration
- Scan the QR code to download the Humax Smart Living app. Alternatively, search for Humax Smart Living in either the Apple App Store or Google Play Store to download and install the app.
- Open the Humax Smart Living app, follow the on-screen prompts and then tap Register to create an account using your phone number or email address. Once registered, proceed to adding your device.
Add Device (Quick Mode)
- Plug your smart device into a wall outlet and switch on the power. Press and hold the power button for at least 5 seconds until the indicator light begins to flash.
- On your phone/tablet, open the Humax Smart Living app and tap the + icon in the top right. Select the device type, and confirm the indicator light is still flashing. The device should automatically fetch your Wi-Fi network details.
- Tap confirm to connect to the device. When the prompt Successfully added 1 device appears, the connection is complete and your device should appear in the device list on the app.
Add Device in AP Mode (Advanced)
If the device doesn’t connect using Quick Mode, follow these steps:
- On your phone/tablet, open the Humax Smart Living app and tap the + icon in the top right. Select Add Device.
- Under Add Manually – Socket, select Plug (BLE+WiFi).
- In the top right, change mode from default (EZ mode) to AP mode.
- Proceed with the on-screen instructions on your phone/tablet.
Contact & Support
If you require any assistance or support, please contact us:
- Phone: 0344 318 8800
- Email: [email protected]
Our UK based support team is available between Mon-Fri 9am-5pm. For more information, visit uk.humaxdigital.com/support.
Specifications
- Model: UK 3 Pin Smart Wi-Fi Plug
- Wireless Type: Wi-Fi 2.4GHz
- Voltage: AC100-240V
- Rated Current: 16A (Max)
- Working Temp: -20~50ºC
- Wi-Fi Frequency: 2.4GHz
- AC Frequency: 50-60Hz
- Dimensions: 58 x 55 x 55 mm
- Material: PC
- Supported Systems: Android & iOS
App Download & Registration
Scan the QR code to download the Humax Smart Living app. 
Alternatively, search for Humax Smart Living in either the Apple App Store or
Google Play Store to download and install the app.
Open the Humax Smart Living app, follow the on-screen prompts and then tap
“Register” to create an account using your phone number or email address. Once
registered, proceed to adding your device.
Add Device (Quick Mode)
Before you begin:
- Make sure your phone/tablet is powered on and connected to your Wi-Fi network.
- Plug your smart device in to a wall outlet and switch on the power. Press and hold power button for at least 5 seconds until the indicator light begins to flash.
- On your phone/tablet, open the Humax Smart Living app and tap “+” icon in the top right. Select the device type, and confirm the indicator light is still flashing. The device should automatically fetch your Wi-Fi network details.
- Tap confirm to connect to the device. When the prompt “Successfully added 1 device” appears, the connection is complete and your device should appear in the device list on the app.
Add Device in AP Mode (Advanced)
If the device doesn’t connect using Easy Mode, users can add devices using
AP Mode.
- On your phone/tablet, open the Humax Smart Living app and tap the “+” icon in the top right. Select “Add Device”.
- Under “Add Manually – Socket”, select “Plug(BLE+WiFi)”.
- In the top right, please change mode from default (EZ mode) to AP mode
- Proceed with the on-screen instructions on your phone/tablet.
Contact & Support
We hope you enjoy using your device.
If you require any assistance, feel free to contact us.
Phone: 0344 318 8800
Email: [email protected]
Our UK based support team is available between Mon-Fri 9am-5pm.
For more information visit:
uk.humaxdigital.com/support