DURATECH PL-REM-200 Link Driver User Manual

October 27, 2023
DURATECH

DURATECH PL-REM-200 Link Driver User Manual

DURATECH PL-REM-200 Link Driver User Manual

Technical specifications

Electrical specifications

DURATECH PL-REM-200 Link Driver - Electrical
specifications

General specifications Controller

DURATECH PL-REM-200 Link Driver - General specifications
Controller

Box contents

  1. PL-REM-200 controller
  2. Handheld transmitter (DuraLink™ version)
  3. Spare battery (type A23 12V)
  4. Screws (4x) & wall plugs (4x)
  5. Owners’s manual

DURATECH PL-REM-200 Link Driver - overview

Installation instructions

  • Connect a 230VAC power source to the “220-240VAC INPUT” terminal
  • Connect the swimming pool lights to the “Lamp 12VAC output” terminal

Make sure the total load of pool lights does not exceed 200Watt

Optional: The “Switch A” & “switch B” terminals can be used to control auxiliary circuits like a pool cover or garden lights.

DURATECH PL-REM-200 Link Driver - Installation
instructions

Pairing handheld transmitter & controller

The handheld transmitter is already paired in the factory and ready to use. The PL-REM-200 can pair with up to 6 handheld transmitters. In case a problem arises, the pairing process can be done manually:

Manual Pairing process:

Make sure the PL-REM-200 is connected to a power source.

  1. Press the pairing button on the small circuit board, inside the controller for at least 5 seconds.
    –> The LED will start to blink fast

  2. Within 25 seconds, press any button on the handheld transmitter.
    –> If the transmitter is paired correctly, the LED will flash slowly for 5 times
    –> If the PL-REM-200 pairing memory is full, the LED will flash 15 times.
    This means 6 handheld devices have already been paired.

To unpair all handheld transmitters with the controller: Push the pairing button for at least 5 seconds, then do nothing for at least 25 seconds.

–> The pair memory will be erased – the green LED will flash 5x on/off.

If no transmitters are paired, the PL-REM-200 will accept messages from any transmitter!

DURATECH PL-REM-200 Link Driver - To unpair all handheld transmitters with
the controller

Handheld transmitter functions

DURATECH PL-REM-200 Link Driver - Handheld transmitter
functions

Replacing transmitter battery

  • Remove the philips head screw and open the transmitter
  • Replace the battery, respecting the polarity
    Battery type: A23 12V

DURATECH PL-REM-200 Link Driver - Replacing transmitter
battery

Troubleshooting

DURATECH PL-REM-200 Link Driver - Troubleshooting

Declaraction of Conformity

Declarations of conformity covering this product are available for download from the House of Duratech website: www.duratech.be

DURATECH PL-REM-200 Link Driver - duratech

Contact details

Propulsion Systems bv
Dooren 72
1785 Merchtem, Belgium
Tel +32 2 461 02 53
www.duratech.be
info@propulsionsystems.be

We reserve the rights to change all or part of the contents of this document without prior notice

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals