darklab POWERBOLT Plus Wireless Tattoo Machines Instructions
- June 3, 2024
- darklab
Table of Contents
POWERBOLT Plus Wireless Tattoo Machines
**Instructions
**
POWERBOLT Plus Wireless Tattoo Machines
DEVICE MENUS VERSION 73
THE POWERBOLT MENU
Hot Keys
up/down button press: e-give control
power/down button press: hard reset
turn on/off the Bluetooth: press the up button and power button until a
dark blue LED comes on
Power Button: turn device on/off
White: indicates battery charge level
Blue: adjust eGive level (use ‘up’ and ‘down’ to control)
Yellow: turn Bluetooth on/off
Green: set voltage resolution from 0.1 to 0.5 voltage steps
Orange: automatic LED brightness dimming (enable/disable)
Light Blue: manual LED brightness control (use ‘up’ and ‘down’ to
control)
Red: shipping mode
POWERBOLT +, LIGHTNINGBOLT, LIGHTNINGBOLT UNI, AIRBOLT, AIRBOLT MINI
MENU
Hot Keys
up/down button press: e-give control
up/down button press/hold (for at least 3 seconds): footswitch pairing
power/down button press: hard reset
turn on/off the Bluetooth: press the up button and power button until a
dark blue LED comes on
Power Button: turn device on/off
White: indicates battery charge level
Blue: adjust eGive level (use ‘up’ and ‘down’ to control)
Green: set voltage resolution from 0.1 to 0.5 voltage steps
Orange: automatic LED brightness dimming (enable/disable)
Light Blue: manual LED brightness control (use ‘up’ and ‘down’ to
control)
Pink: sync or un-sync footswitch (for compatible devices)
Red: shipping mode